Skip to content

Instantly share code, notes, and snippets.

@Noltari

Noltari/openwrt-6.6-r8169-aspm-enabled.txt

Created June 28, 2024 17:18
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save Noltari/509822bef045d11e9194e72543394c2b to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save Noltari/509822bef045d11e9194e72543394c2b to your computer and use it in GitHub Desktop.
Download ZIP
RPi 5 + RTL8111H (PCIe TO Gigabit ETH Board C) + OpenWrt 6.6
Raw
openwrt-6.6-r8169-aspm-enabled.txt
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[ 0.000000] Linux version 6.6.35 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r26773-85d9fd6f0e) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Mon Jun 24 07:46:19 2024
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000001000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000001000000..0x0000000004ffffff (65536 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
[ 0.000000] OF: reserved mem: 0x000000003fd16400..0x000000003fd16438 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff]
[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003fbfffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0, zone DMA: 1024 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 18 pages/cpu s36776 r8192 d28760 u73728
[ 0.000000] pcpu-alloc: s36776 r8192 d28760 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Hardware dirty bit management
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=D8:3A:DD:C8:B3:5A vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyAMA10,115200 root=PARTUUID=4fa0d287-02 rootfstype=squashfs,ext4 rootwait
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2063360
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[ 0.000000] Memory: 8077352K/8384512K available (9344K kernel code, 984K rwdata, 2692K rodata, 512K init, 556K bss, 241624K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000126] Console: colour dummy device 80x25
[ 0.000130] printk: console [tty1] enabled
[ 0.000253] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
[ 0.000260] pid_max: default: 32768 minimum: 301
[ 0.000375] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000410] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000617] cgroup: Disabling memory control group subsystem
[ 0.001041] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.001121] rcu: Hierarchical SRCU implementation.
[ 0.001125] rcu: Max phase no-delay instances is 1000.
[ 0.001648] smp: Bringing up secondary CPUs ...
[ 0.001814] Detected PIPT I-cache on CPU1
[ 0.001852] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[ 0.002037] Detected PIPT I-cache on CPU2
[ 0.002067] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[ 0.002245] Detected PIPT I-cache on CPU3
[ 0.002271] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[ 0.002296] smp: Brought up 1 node, 4 CPUs
[ 0.002313] SMP: Total of 4 processors activated.
[ 0.002316] CPU features: detected: 32-bit EL0 Support
[ 0.002320] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.002325] CPU features: detected: Common not Private translations
[ 0.002328] CPU features: detected: CRC32 instructions
[ 0.002331] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.002334] CPU features: detected: Privileged Access Never
[ 0.002338] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.002368] CPU: All CPU(s) started at EL2
[ 0.002371] alternatives: applying system-wide alternatives
[ 0.006425] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.006437] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.007163] pinctrl core: initialized pinctrl subsystem
[ 0.007475] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.007902] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.007961] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.008047] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.008174] thermal_sys: Registered thermal governor 'step_wise'
[ 0.008183] cpuidle: using governor ladder
[ 0.008191] cpuidle: using governor menu
[ 0.008255] ASID allocator initialised with 65536 entries
[ 0.008550] Serial: AMBA PL011 UART driver
[ 0.009218] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[ 0.009404] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2
[ 0.009417] printk: console [ttyAMA10] enabled
[ 0.632300] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-06-05T15:41:49, variant start_cd
[ 0.652350] raspberrypi-firmware soc:firmware: Firmware hash is 6fe0b09100000000000000000000000000000000
[ 0.664922] Modules: 29200 pages in range for non-PLT usage
[ 0.664924] Modules: 520720 pages in range for PLT usage
[ 0.670801] cryptd: max_cpu_qlen set to 1000
[ 0.680638] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[ 0.688058] iommu: Default domain type: Translated
[ 0.692865] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.699142] SCSI subsystem initialized
[ 0.702937] usbcore: registered new interface driver usbfs
[ 0.708447] usbcore: registered new interface driver hub
[ 0.713784] usbcore: registered new device driver usb
[ 0.718940] mc: Linux media interface: v0.10
[ 0.723228] videodev: Linux video capture interface: v2.00
[ 0.728740] pps_core: LinuxPPS API ver. 1 registered
[ 0.733719] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.742892] PTP clock support registered
[ 0.747202] clocksource: Switched to clocksource arch_sys_counter
[ 0.754255] NET: Registered PF_INET protocol family
[ 0.759302] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.769229] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.777839] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.785617] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.793846] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.802772] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.809388] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.816299] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.823701] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.829399] PCI: CLS 0 bytes, default 64
[ 0.833792] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 0.840442] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.846295] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.867754] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.875369] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 26)
[ 0.883108] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 27)
[ 0.890831] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 28)
[ 0.898555] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 29)
[ 0.907206] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.914040] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges:
[ 0.921032] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff]
[ 0.930123] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000
[ 0.938426] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000
[ 0.946727] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 0.955109] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
[ 0.962103] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff]
[ 0.971195] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[ 0.979501] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[ 0.987807] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[ 0.996106] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 1.005508] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver.
[ 1.013200] bcm2708_fb: probe of soc:fb failed with error -2
[ 1.053330] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 1.059933] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 31, base_baud = 6000000) is a Broadcom BCM7271 UART
[ 1.070726] iproc-rng200 107d208000.rng: hwrng registered
[ 1.076174] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[ 1.084586] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
[ 1.092381] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
[ 1.100001] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
[ 1.107791] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
[ 1.115406] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
[ 1.123196] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
[ 1.130812] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
[ 1.138600] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
[ 1.146318] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[ 1.155128] brd: module loaded
[ 1.159105] loop: module loaded
[ 1.162379] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.170444] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.176228] dwc_otg: FIQ enabled
[ 1.176229] dwc_otg: NAK holdoff enabled
[ 1.176231] dwc_otg: FIQ split-transaction FSM enabled
[ 1.176234] Module dwc_common_port init
[ 1.176319] usbcore: registered new interface driver uas
[ 1.181660] usbcore: registered new interface driver usb-storage
[ 1.187742] mousedev: PS/2 mouse device common for all mice
[ 1.201794] rpi-rtc soc:rpi_rtc: registered as rtc0
[ 1.208214] rpi-rtc soc:rpi_rtc: setting system clock to 1970-01-01T00:00:08 UTC (8)
[ 1.216321] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[ 1.222878] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.231778] sdhci: Secure Digital Host Controller Interface driver
[ 1.237991] sdhci: Copyright(c) Pierre Ossman
[ 1.242398] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.248424] NET: Registered PF_INET6 protocol family
[ 1.253559] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO
[ 1.253648] Segment Routing with IPv6
[ 1.262308] In-situ OAM (IOAM) with IPv6
[ 1.266251] NET: Registered PF_PACKET protocol family
[ 1.271323] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.284369] 8021q: 802.1Q VLAN Support v1.8
[ 1.292180] Key type .fscrypt registered
[ 1.296113] Key type fscrypt-provisioning registered
[ 1.301592] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges:
[ 1.308585] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff]
[ 1.317674] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000
[ 1.325970] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000
[ 1.334270] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 1.343721] brcm-pcie 1000110000.pcie: Forcing gen 2
[ 1.348857] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00
[ 1.355320] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.360861] pci_bus 0000:00: root bus resource [mem 0x1b00000000-0x1bfffffffb] (bus address [0x00000000-0xfffffffb])
[ 1.371430] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1affffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 1.382616] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
[ 1.388661] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.394639] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.517206] brcm-pcie 1000110000.pcie: link up, 2.5 GT/s PCIe x1 (!SSC)
[ 1.523863] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 1.529901] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 1.535504] pci 0000:01:00.0: reg 0x18: [mem 0x1b00000000-0x1b00000fff 64bit]
[ 1.542673] pci 0000:01:00.0: reg 0x20: [mem 0x1b00000000-0x1b00003fff 64bit]
[ 1.549910] pci 0000:01:00.0: supports D1 D2
[ 1.554189] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.587217] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.593859] pci 0000:00:00.0: BAR 8: assigned [mem 0x1b00000000-0x1b000fffff]
[ 1.601024] pci 0000:01:00.0: BAR 4: assigned [mem 0x1b00000000-0x1b00003fff 64bit]
[ 1.608715] pci 0000:01:00.0: BAR 2: assigned [mem 0x1b00004000-0x1b00004fff 64bit]
[ 1.616405] pci 0000:01:00.0: BAR 0: no space for [io size 0x0100]
[ 1.622693] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0100]
[ 1.629330] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.634309] pci 0000:00:00.0: bridge window [mem 0x1b00000000-0x1b000fffff]
[ 1.641471] pci 0000:00:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512
[ 1.649946] pci 0000:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512
[ 1.658460] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.664594] pcieport 0000:00:00.0: PME: Signaling with IRQ 34
[ 1.670399] pcieport 0000:00:00.0: AER: enabled with IRQ 34
[ 1.676074] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
[ 1.683064] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff]
[ 1.692150] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[ 1.700448] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[ 1.708748] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[ 1.717044] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 1.726393] brcm-pcie 1000120000.pcie: Forcing gen 2
[ 1.731392] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0001:00
[ 1.737856] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 1.743358] pci_bus 0001:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[ 1.753925] pci_bus 0001:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 1.765105] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400
[ 1.771144] pci 0001:00:00.0: PME# supported from D0 D3hot
[ 1.777086] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.897202] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[ 1.903852] pci 0001:01:00.0: [1de4:0001] type 00 class 0x020000
[ 1.909889] pci 0001:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]
[ 1.916180] pci 0001:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]
[ 1.922472] pci 0001:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]
[ 1.928818] pci 0001:01:00.0: supports D1
[ 1.932835] pci 0001:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 1.967206] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.973846] pci 0001:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff]
[ 1.981008] pci 0001:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]
[ 1.988171] pci 0001:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]
[ 1.995332] pci 0001:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]
[ 2.002495] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 2.007474] pci 0001:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]
[ 2.014634] pci 0001:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 2.023109] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 2.031604] pcieport 0001:00:00.0: enabling device (0000 -> 0002)
[ 2.037736] pcieport 0001:00:00.0: PME: Signaling with IRQ 35
[ 2.043530] pcieport 0001:00:00.0: AER: enabled with IRQ 35
[ 2.049163] rp1 0001:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[ 2.058246] rp1 0001:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[ 2.067507] rp1 0001:01:00.0: enabling device (0000 -> 0002)
[ 2.073682] rp1 0001:01:00.0: chip_id 0x20001927
[ 2.082325] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 97
[ 2.119150] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 103 (d8:3a:dd:c8:b3:5a)
[ 2.129851] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 2.134924] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[ 2.142605] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
[ 2.151606] xhci-hcd xhci-hcd.0: irq 128, io mem 0x1f00200000
[ 2.157424] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 2.162490] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[ 2.169739] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[ 2.175895] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 2.184196] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.191444] usb usb1: Product: xHCI Host Controller
[ 2.196334] usb usb1: Manufacturer: Linux 6.6.35 xhci-hcd
[ 2.201751] usb usb1: SerialNumber: xhci-hcd.0
[ 2.206276] hub 1-0:1.0: USB hub found
[ 2.210044] hub 1-0:1.0: 2 ports detected
[ 2.214135] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 2.222437] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.229686] usb usb2: Product: xHCI Host Controller
[ 2.234576] usb usb2: Manufacturer: Linux 6.6.35 xhci-hcd
[ 2.239991] usb usb2: SerialNumber: xhci-hcd.0
[ 2.244543] hub 2-0:1.0: USB hub found
[ 2.248311] hub 2-0:1.0: 1 port detected
[ 2.252415] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 2.257486] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[ 2.265152] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
[ 2.274151] xhci-hcd xhci-hcd.1: irq 133, io mem 0x1f00300000
[ 2.279968] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 2.285034] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[ 2.292282] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[ 2.298515] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 2.306810] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.314059] usb usb3: Product: xHCI Host Controller
[ 2.318952] usb usb3: Manufacturer: Linux 6.6.35 xhci-hcd
[ 2.324365] usb usb3: SerialNumber: xhci-hcd.1
[ 2.328955] hub 3-0:1.0: USB hub found
[ 2.332719] hub 3-0:1.0: 2 ports detected
[ 2.336804] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[ 2.345100] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.352348] usb usb4: Product: xHCI Host Controller
[ 2.357240] usb usb4: Manufacturer: Linux 6.6.35 xhci-hcd
[ 2.362654] usb usb4: SerialNumber: xhci-hcd.1
[ 2.367263] hub 4-0:1.0: USB hub found
[ 2.371031] hub 4-0:1.0: 1 port detected
[ 2.375059] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
[ 2.382849] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
[ 2.390783] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 2.399010] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 2.407044] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 2.415080] platform 1000800000.codec: Adding to iommu group 0
[ 2.420938] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 2.429147] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 2.437358] platform 1000880000.pisp_be: Adding to iommu group 0
[ 2.443398] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 2.451257] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 2.459293] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
[ 2.466247] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 2.474465] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
[ 2.481444] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 2.489653] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
[ 2.496990] mmc1: CQHCI version 5.10
[ 2.497369] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO
[ 2.497558] of_cfs_init
[ 2.497577] of_cfs_init: OK
[ 2.497615] clk: Disabling unused clocks
[ 2.514839] uart-pl011 107d001000.serial: no DMA platform data
[ 2.549737] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
[ 2.649606] mmc0: new ultra high speed DDR50 SDHC card at address 0001
[ 2.656345] mmcblk0: mmc0:0001 00000 14.6 GiB
[ 2.661174] mmcblk0: p1 p2
[ 2.664009] mmcblk0: mmc0:0001 00000 14.6 GiB
[ 2.698919] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
[ 2.715931] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 2.723274] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 2.741289] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[ 2.812993] EXT4-fs (mmcblk0p2): recovery complete
[ 2.819717] EXT4-fs (mmcblk0p2): mounted filesystem ff313567-e9f1-5a5d-9895-3ba130b4a864 ro with ordered data mode. Quota mode: disabled.
[ 2.832131] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 2.839077] Freeing unused kernel memory: 512K
[ 2.843564] Run /sbin/init as init process
[ 2.847672] with arguments:
[ 2.847672] /sbin/init
[ 2.847673] with environment:
[ 2.847674] HOME=/
[ 2.847674] TERM=linux
[ 2.893522] init: Console is alive
[ 2.896970] init: - watchdog -
[ 3.026399] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.038795] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.051009] init: - preinit -
[ 3.103538] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
[ 3.114467] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode
[ 3.124640] pps pps0: new PPS source ptp0
[ 3.128693] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
[ 5.183468] mount_root: mounting /dev/root with options
[ 5.248283] EXT4-fs (mmcblk0p2): re-mounted ff313567-e9f1-5a5d-9895-3ba130b4a864 r/w. Quota mode: disabled.
[ 5.282040] insmod: module is already loaded - fat
[ 5.287265] insmod: module is already loaded - vfat
[ 5.299241] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5.309483] urandom-seed: Seeding with /etc/urandom.seed
[ 5.323847] macb 1f00100000.ethernet: gem-ptp-timer ptp clock unregistered.
[ 5.335080] procd: - early -
[ 5.337987] procd: - watchdog -
[ 5.850751] procd: - watchdog -
[ 5.854353] procd: - ubus -
[ 6.007050] procd: - init -
[ 6.063250] kmodloader: loading kernel modules from /etc/modules.d/*
[ 6.077312] hid: raw HID events driver (C) Jiri Kosina
[ 6.082938] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.093706] GACT probability on
[ 6.096992] Mirror/redirect action on
[ 6.101295] u32 classifier
[ 6.104004] input device check on
[ 6.107674] Actions configured
[ 6.120108] brcmutil: loading out-of-tree module taints kernel.
[ 6.126167] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4
[ 6.133706] Backport generated by backports.git 193becf2
[ 6.140574] usbcore: registered new device driver r8152-cfgselector
[ 6.146873] usbcore: registered new interface driver r8152
[ 6.152934] r8169 0000:01:00.0: enabling device (0000 -> 0002)
[ 6.187461] r8169 0000:01:00.0: can't read MAC address, setting random one
[ 6.213274] r8169 0000:01:00.0 eth1: RTL8168h/8111h, 1e:b0:9e:0a:62:1a, XID 541, IRQ 158
[ 6.221415] r8169 0000:01:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 6.230016] leds enp1s0-0::lan: Setting an LED's brightness failed (-524)
[ 6.236829] leds enp1s0-1::lan: Setting an LED's brightness failed (-524)
[ 6.243658] leds enp1s0-2::lan: Setting an LED's brightness failed (-524)
[ 6.250963] usbcore: registered new interface driver usbhid
[ 6.256557] usbhid: USB HID core driver
[ 6.262010] xt_time: kernel timezone is -0000
[ 6.266528] usbcore: registered new interface driver ax88179_178a
[ 6.272767] usbcore: registered new interface driver cdc_ether
[ 6.278813] usbcore: registered new interface driver cdc_ncm
[ 6.296080] PPP generic driver version 2.4.2
[ 6.300912] NET: Registered PF_PPPOX protocol family
[ 6.306360] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 6.314227] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
[ 6.329620] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.338357] usbcore: registered new interface driver brcmfmac
[ 6.344149] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,5-model-b.bin failed with error -2
[ 6.355859] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.raspberrypi,5-model-b.bin
[ 6.367176] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 6.525539] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 6.533429] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jul 29 2022 02:15:20 version 7.45.250 (70e9766 CY) FWID 01-e53e306b
[ 7.187216] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC)
[ 7.437435] r8169 0000:01:00.0 eth1: Link is Down
[ 7.442168] br-lan: port 1(eth1) entered blocking state
[ 7.447423] br-lan: port 1(eth1) entered disabled state
[ 7.452674] r8169 0000:01:00.0 eth1: entered allmulticast mode
[ 7.458644] r8169 0000:01:00.0 eth1: entered promiscuous mode
[ 7.464955] br-lan: port 1(eth1) entered blocking state
[ 7.470214] br-lan: port 1(eth1) entered forwarding state
[ 7.493163] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
[ 7.504091] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode
[ 7.514801] pps pps0: new PPS source ptp0
[ 7.518844] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
[ 7.567505] br-lan: port 1(eth1) entered disabled state
[ 8.694953] brcmfmac mmc1:0001:1 phy0-ap0: renamed from wlan0
[ 8.761121] br-lan: port 2(phy0-ap0) entered blocking state
[ 8.766720] br-lan: port 2(phy0-ap0) entered disabled state
[ 8.772333] brcmfmac mmc1:0001:1 phy0-ap0: entered allmulticast mode
[ 8.778763] brcmfmac mmc1:0001:1 phy0-ap0: entered promiscuous mode
[ 8.861877] br-lan: port 2(phy0-ap0) entered blocking state
[ 8.867479] br-lan: port 2(phy0-ap0) entered forwarding state
[ 10.678347] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 11.408145] r8169 0000:01:00.0 eth1: Link is Up - 1Gbps/Full - flow control off
[ 11.415547] br-lan: port 1(eth1) entered blocking state
[ 11.420796] br-lan: port 1(eth1) entered forwarding state
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment