Last active
June 23, 2024 12:22
-
-
Save Noltari/b56128eee8e75b57437a860c7c6b8bd5 to your computer and use it in GitHub Desktop.
RPi 5 + RTL8125BG (MCUZone MP2.5G) + OpenWrt 6.6
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| 0.26 RPi: BOOTSYS release VERSION:6fe0b091 DATE: 2024/06/05 TIME: 16:41:49 | |
| 0.30 BOOTMODE: 0x06 partition 0 build-ts BUILD_TIMESTAMP=1717602109 serial dbf81e7c boardrev d04170 stc 830140 | |
| 0.40 AON_RESET: 00000003 PM_RSTS 00000020 | |
| 0.47 RP1_BOOT chip ID: 0x20001927 | |
| 0.50 PM_RSTS: 0x00000020 | |
| 0.50 part 00000000 reset_info 00000000 | |
| 0.54 PMIC reset-event 00000000 rtc 6676e4b0 alarm 00000000 enabled 0 | |
| 0.60 uSD voltage 3.3V | |
| 0.79 Initialising SDRAM 'Micron' 32Gb x2 total-size: 64 Gbit 4267 | |
| 0.82 DDR 4267 1 0 64 152 | |
| 2.37 OTP boardrev d04170 bootrom a a | |
| 2.39 Customer key hash 0000000000000000000000000000000000000000000000000000000000000000 | |
| 2.46 VC-JTAG unlocked | |
| 2.69 RP1_BOOT chip ID: 0x20001927 | |
| 3.79 RP1_BOOT chip ID: 0x20001927 | |
| 3.79 RP1_BOOT: fw size 25992 | |
| 3.34 PCI2 init | |
| 3.34 PCI2 reset | |
| 3.79 PCIe scan 00001de4:00000001 | |
| 3.80 RP1_CHIP_INFO 20001927 | |
| 3.82 RPi: BOOTLOADER release VERSION:6fe0b091 DATE: 2024/06/05 TIME: 16:41:49 | |
| 3.89 BOOTMODE: 0x06 partition 0 build-ts BUILD_TIMESTAMP=1717602109 serial dbf81e7c boardrev d04170 stc 3889664 | |
| 3.99 AON_RESET: 00000003 PM_RSTS 00000020 | |
| 3.27 usb_pd_init status 3 | |
| 3.28 USB_PD CONFIG 0 43 | |
| 3.37 XHCI-STOP | |
| 3.37 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.48 USBSTS 1 | |
| 3.50 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.55 xHC0 ports 3 slots 64 intrs 4 | |
| 3.67 XHCI-STOP | |
| 3.67 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.72 USBSTS 1 | |
| 3.74 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.79 xHC1 ports 3 slots 64 intrs 4 | |
| 3.87 USB-PD: src-cap PDO object1 0x0a01912c | |
| 3.88 Current 3000 mA | |
| 3.90 Voltage 5000 mV | |
| 3.92 USB-PD: src-cap PDO object2 0x0002d12c | |
| 3.97 Current 3000 mA | |
| 3.99 Voltage 9000 mV | |
| 4.01 USB-PD: src-cap PDO object3 0x0003c12c | |
| 4.05 Current 3000 mA | |
| 4.07 Voltage 12000 mV | |
| 4.09 USB-PD: src-cap PDO object4 0xc0dc213c | |
| 4.13 Boot mode: SD (01) order f4 | |
| 4.31 SD HOST: 200000000 CTL0: 0x00800000 BUS: 400000 Hz actual: 390625 HZ div: 512 (256) status: 0x1fff0000 delay: 276 | |
| 4.42 SD HOST: 200000000 CTL0: 0x00800f00 BUS: 400000 Hz actual: 390625 HZ div: 512 (256) status: 0x1fff0000 delay: 276 | |
| 4.34 OCR c0ff8000 [132] | |
| CID: 001b534d303030303010a59f4e8300e8 | |
| CSD: 400e00325b590000751f7f800a404000 | |
| 4.41 SD: bus-width: 4 spec: 2 SCR: 0x02b58002 0x00000000 | |
| 4.49 SD HOST: 200000000 CTL0: 0x00800f04 BUS: 50000000 Hz actual: 50000000 HZ div: 4 (2) status: 0x1fff0000 delay: 2 | |
| 4.58 MBR: 0x00002000, 131072 type: 0x0c | |
| 4.60 MBR: 0x00024000, 212992 type: 0x83 | |
| 4.64 MBR: 0x00000000, 0 type: 0x00 | |
| 4.68 MBR: 0x00000000, 0 type: 0x00 | |
| 4.72 Trying partition: 0 | |
| 4.75 type: 16 lba: 8192 'mkfs.fat' ' V ^ ' clusters 32695 (4) | |
| 4.81 rsc 4 fat-sectors 128 root dir cluster 1 sectors 32 entries 512 | |
| 4.87 FAT16 clusters 32695 | |
| 4.91 [sdcard] autoboot.txt not found | |
| 4.93 Select partition rsts 0 C(boot_partition) 0 EEPROM config 0 result 0 | |
| 4.00 Trying partition: 0 | |
| 4.03 type: 16 lba: 8192 'mkfs.fat' ' V ^ ' clusters 32695 (4) | |
| 4.08 rsc 4 fat-sectors 128 root dir cluster 1 sectors 32 entries 512 | |
| 4.15 FAT16 clusters 32695 | |
| 4.19 Read config.txt bytes 789 hnd 0x4 | |
| 4.22 Read distroconfig.txt bytes 678 hnd 0x6 | |
| 4.26 [sdcard] pieeprom.upd not found | |
| 4.30 usb_max_current_enable default 0 max-current 3000 | |
| 4.41 Read bcm2712-rpi-5-b.dtb bytes 80322 hnd 0x19ae | |
| 4.44 dt-match: compatible: raspberrypi,5-model-b match: brcm,bcm2712 | |
| 4.50 dt-match: compatible: brcm,bcm2712 match: brcm,bcm2712 | |
| 4.57 Selecting USB low current limit | |
| NOTICE: BL31: v2.6(release):v2.6-239-g2a9ede0bd | |
| NOTICE: BL31: Built : 14:26:57, Jun 22 2023 | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] | |
| [ 0.000000] Linux version 6.6.34 (noltari@atlantis) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r26279+396-140b48a9e9) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Sat Jun 22 14:04:24 2024 | |
| [ 0.000000] random: crng init done | |
| [ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000001000000, size 64 MiB | |
| [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x0000000001000000..0x0000000004ffffff (65536 KiB) map reusable linux,cma | |
| [ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 | |
| [ 0.000000] OF: reserved mem: 0x000000003fd16400..0x000000003fd16438 (0 KiB) nomap non-reusable nvram@0 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] | |
| [ 0.000000] node 0: [mem 0x0000000000080000-0x000000003fbfffff] | |
| [ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] | |
| [ 0.000000] On node 0, zone DMA: 1024 pages in unavailable ranges | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.2 | |
| [ 0.000000] percpu: Embedded 18 pages/cpu s36264 r8192 d29272 u73728 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: Virtualization Host Extensions | |
| [ 0.000000] CPU features: detected: Hardware dirty bit management | |
| [ 0.000000] CPU features: detected: Spectre-v4 | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=D8:3A:DD:C8:B3:5A vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyAMA10,115200 root=PARTUUID=314feb47-02 rootfstype=squashfs,ext4 rootwait | |
| [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2063360 | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 4. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) | |
| [ 0.000000] Memory: 8077932K/8384512K available (8960K kernel code, 970K rwdata, 2556K rodata, 512K init, 537K bss, 241044K reserved, 65536K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] rcu: Hierarchical RCU implementation. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns | |
| [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns | |
| [ 0.000133] Console: colour dummy device 80x25 | |
| [ 0.000137] printk: console [tty1] enabled | |
| [ 0.000258] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) | |
| [ 0.000265] pid_max: default: 32768 minimum: 301 | |
| [ 0.000383] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.000416] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.000619] cgroup: Disabling memory control group subsystem | |
| [ 0.001049] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.001130] rcu: Hierarchical SRCU implementation. | |
| [ 0.001133] rcu: Max phase no-delay instances is 1000. | |
| [ 0.001686] smp: Bringing up secondary CPUs ... | |
| [ 0.001858] Detected PIPT I-cache on CPU1 | |
| [ 0.001897] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] | |
| [ 0.002085] Detected PIPT I-cache on CPU2 | |
| [ 0.002116] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] | |
| [ 0.002296] Detected PIPT I-cache on CPU3 | |
| [ 0.002322] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] | |
| [ 0.002348] smp: Brought up 1 node, 4 CPUs | |
| [ 0.002364] SMP: Total of 4 processors activated. | |
| [ 0.002369] CPU features: detected: 32-bit EL0 Support | |
| [ 0.002372] CPU features: detected: Data cache clean to the PoU not required for I/D coherence | |
| [ 0.002376] CPU features: detected: Common not Private translations | |
| [ 0.002380] CPU features: detected: CRC32 instructions | |
| [ 0.002383] CPU features: detected: RCpc load-acquire (LDAPR) | |
| [ 0.002386] CPU features: detected: Privileged Access Never | |
| [ 0.002390] CPU features: detected: Speculative Store Bypassing Safe (SSBS) | |
| [ 0.002421] CPU: All CPU(s) started at EL2 | |
| [ 0.002424] alternatives: applying system-wide alternatives | |
| [ 0.006482] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| [ 0.006494] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
| [ 0.007230] pinctrl core: initialized pinctrl subsystem | |
| [ 0.007536] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.007971] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.008031] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.008117] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.008233] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.008242] cpuidle: using governor ladder | |
| [ 0.008249] cpuidle: using governor menu | |
| [ 0.008311] ASID allocator initialised with 65536 entries | |
| [ 0.008613] Serial: AMBA PL011 UART driver | |
| [ 0.009281] bcm2835-mbox 107c013880.mailbox: mailbox enabled | |
| [ 0.009474] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 | |
| [ 0.009487] printk: console [ttyAMA10] enabled | |
| [ 0.632630] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-06-05T15:41:49, variant start_cd | |
| [ 0.652680] raspberrypi-firmware soc:firmware: Firmware hash is 6fe0b09100000000000000000000000000000000 | |
| [ 0.665275] Modules: 29344 pages in range for non-PLT usage | |
| [ 0.665277] Modules: 520864 pages in range for PLT usage | |
| [ 0.671158] cryptd: max_cpu_qlen set to 1000 | |
| [ 0.680978] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 | |
| [ 0.688396] iommu: Default domain type: Translated | |
| [ 0.693204] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.699482] SCSI subsystem initialized | |
| [ 0.703275] usbcore: registered new interface driver usbfs | |
| [ 0.708791] usbcore: registered new interface driver hub | |
| [ 0.714129] usbcore: registered new device driver usb | |
| [ 0.719287] mc: Linux media interface: v0.10 | |
| [ 0.723573] videodev: Linux video capture interface: v2.00 | |
| [ 0.729085] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.734063] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| [ 0.743236] PTP clock support registered | |
| [ 0.747492] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.754553] NET: Registered PF_INET protocol family | |
| [ 0.759601] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 0.769505] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) | |
| [ 0.778115] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.785895] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.794126] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) | |
| [ 0.803083] TCP: Hash tables configured (established 65536 bind 65536) | |
| [ 0.809698] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) | |
| [ 0.816611] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) | |
| [ 0.824019] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.829718] PCI: CLS 0 bytes, default 64 | |
| [ 0.834116] workingset: timestamp_bits=46 max_order=21 bucket_order=0 | |
| [ 0.840770] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.846623] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
| [ 0.868269] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 26) | |
| [ 0.875999] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 27) | |
| [ 0.883728] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 28) | |
| [ 0.891455] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 29) | |
| [ 0.900144] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 | |
| [ 0.906983] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges: | |
| [ 0.913977] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff] | |
| [ 0.923069] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000 | |
| [ 0.931373] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000 | |
| [ 0.939676] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 0.948053] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: | |
| [ 0.955043] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] | |
| [ 0.964136] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 | |
| [ 0.972440] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 | |
| [ 0.980749] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 | |
| [ 0.989051] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 0.998451] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver. | |
| [ 1.006138] bcm2708_fb: probe of soc:fb failed with error -2 | |
| [ 1.046302] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled | |
| [ 1.052905] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 31, base_baud = 6000000) is a Broadcom BCM7271 UART | |
| [ 1.063711] iproc-rng200 107d208000.rng: hwrng registered | |
| [ 1.069167] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) | |
| [ 1.077576] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 | |
| [ 1.085368] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 | |
| [ 1.092988] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 | |
| [ 1.100781] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 | |
| [ 1.108399] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 | |
| [ 1.116186] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 | |
| [ 1.123802] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 | |
| [ 1.131592] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 | |
| [ 1.139316] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe | |
| [ 1.148138] brd: module loaded | |
| [ 1.152118] loop: module loaded | |
| [ 1.155399] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver | |
| [ 1.163495] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) | |
| [ 1.169371] usbcore: registered new interface driver uas | |
| [ 1.174707] usbcore: registered new interface driver usb-storage | |
| [ 1.180792] mousedev: PS/2 mouse device common for all mice | |
| [ 1.194831] rpi-rtc soc:rpi_rtc: registered as rtc0 | |
| [ 1.201255] rpi-rtc soc:rpi_rtc: setting system clock to 2024-06-22T14:50:32 UTC (1719067832) | |
| [ 1.210165] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! | |
| [ 1.216717] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer | |
| [ 1.225619] sdhci: Secure Digital Host Controller Interface driver | |
| [ 1.231827] sdhci: Copyright(c) Pierre Ossman | |
| [ 1.236231] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 1.242533] NET: Registered PF_INET6 protocol family | |
| [ 1.247900] Segment Routing with IPv6 | |
| [ 1.251580] In-situ OAM (IOAM) with IPv6 | |
| [ 1.255533] NET: Registered PF_PACKET protocol family | |
| [ 1.260612] 8021q: 802.1Q VLAN Support v1.8 | |
| [ 1.271193] Key type .fscrypt registered | |
| [ 1.275126] Key type fscrypt-provisioning registered | |
| [ 1.280595] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges: | |
| [ 1.287596] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff] | |
| [ 1.296684] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000 | |
| [ 1.304981] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000 | |
| [ 1.313280] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 1.321679] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO | |
| [ 1.321730] mmc1: CQHCI version 5.10 | |
| [ 1.322734] brcm-pcie 1000110000.pcie: Forcing gen 2 | |
| [ 1.322906] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00 | |
| [ 1.322908] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 1.322910] pci_bus 0000:00: root bus resource [mem 0x1b00000000-0x1bfffffffb] (bus address [0x00000000-0xfffffffb]) | |
| [ 1.322911] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1affffffff pref] (bus address [0x400000000-0x6ffffffff]) | |
| [ 1.322918] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 | |
| [ 1.322935] pci 0000:00:00.0: PME# supported from D0 D3hot | |
| [ 1.323416] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 1.362516] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit | |
| [ 1.437499] brcm-pcie 1000110000.pcie: link up, 5.0 GT/s PCIe x1 (!SSC) | |
| [ 1.444166] pci 0000:01:00.0: [10ec:8125] type 00 class 0x020000 | |
| [ 1.450212] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] | |
| [ 1.455820] pci 0000:01:00.0: reg 0x18: [mem 0x1b00000000-0x1b0000ffff 64bit] | |
| [ 1.462998] pci 0000:01:00.0: reg 0x20: [mem 0x1b00000000-0x1b00003fff 64bit] | |
| [ 1.470263] pci 0000:01:00.0: supports D1 D2 | |
| [ 1.474547] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
| [ 1.507517] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 1.514162] pci 0000:00:00.0: BAR 8: assigned [mem 0x1b00000000-0x1b000fffff] | |
| [ 1.521326] pci 0000:01:00.0: BAR 2: assigned [mem 0x1b00000000-0x1b0000ffff 64bit] | |
| [ 1.529019] pci 0000:01:00.0: BAR 4: assigned [mem 0x1b00010000-0x1b00013fff 64bit] | |
| [ 1.536709] pci 0000:01:00.0: BAR 0: no space for [io size 0x0100] | |
| [ 1.542998] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0100] | |
| [ 1.549637] pci 0000:00:00.0: PCI bridge to [bus 01] | |
| [ 1.554616] pci 0000:00:00.0: bridge window [mem 0x1b00000000-0x1b000fffff] | |
| [ 1.561780] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 | |
| [ 1.568020] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit | |
| [ 1.570255] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 | |
| [ 1.586794] pcieport 0000:00:00.0: enabling device (0000 -> 0002) | |
| [ 1.592929] pcieport 0000:00:00.0: PME: Signaling with IRQ 34 | |
| [ 1.598743] pcieport 0000:00:00.0: AER: enabled with IRQ 34 | |
| [ 1.604410] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: | |
| [ 1.611400] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] | |
| [ 1.620486] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 | |
| [ 1.628784] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 | |
| [ 1.637082] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 | |
| [ 1.645380] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 1.646380] mmc0: new ultra high speed DDR50 SDHC card at address 0001 | |
| [ 1.654724] brcm-pcie 1000120000.pcie: Forcing gen 2 | |
| [ 1.660424] mmcblk0: mmc0:0001 00000 14.6 GiB | |
| [ 1.665223] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0001:00 | |
| [ 1.676046] pci_bus 0001:00: root bus resource [bus 00-ff] | |
| [ 1.681552] pci_bus 0001:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) | |
| [ 1.692119] pci_bus 0001:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) | |
| [ 1.703300] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400 | |
| [ 1.709340] pci 0001:00:00.0: PME# supported from D0 D3hot | |
| [ 1.715333] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 1.723413] mmcblk0: p1 p2 | |
| [ 1.726248] mmcblk0: mmc0:0001 00000 14.6 GiB | |
| [ 1.837495] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) | |
| [ 1.844148] pci 0001:01:00.0: [1de4:0001] type 00 class 0x020000 | |
| [ 1.850185] pci 0001:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] | |
| [ 1.856476] pci 0001:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] | |
| [ 1.862768] pci 0001:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] | |
| [ 1.869114] pci 0001:01:00.0: supports D1 | |
| [ 1.873132] pci 0001:01:00.0: PME# supported from D0 D1 D3hot D3cold | |
| [ 1.907497] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 1.914142] pci 0001:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] | |
| [ 1.921309] pci 0001:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] | |
| [ 1.928477] pci 0001:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] | |
| [ 1.935642] pci 0001:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] | |
| [ 1.942810] pci 0001:00:00.0: PCI bridge to [bus 01] | |
| [ 1.947794] pci 0001:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] | |
| [ 1.954958] pci 0001:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 | |
| [ 1.963439] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 | |
| [ 1.971958] pcieport 0001:00:00.0: enabling device (0000 -> 0002) | |
| [ 1.978104] pcieport 0001:00:00.0: PME: Signaling with IRQ 35 | |
| [ 1.983940] pcieport 0001:00:00.0: AER: enabled with IRQ 35 | |
| [ 1.989570] rp1 0001:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 | |
| [ 1.998653] rp1 0001:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 | |
| [ 2.007914] rp1 0001:01:00.0: enabling device (0000 -> 0002) | |
| [ 2.014087] rp1 0001:01:00.0: chip_id 0x20001927 | |
| [ 2.022670] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 97 | |
| [ 2.059468] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 103 (d8:3a:dd:c8:b3:5a) | |
| [ 2.070079] xhci-hcd xhci-hcd.0: xHCI Host Controller | |
| [ 2.075149] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 | |
| [ 2.082841] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 | |
| [ 2.091849] xhci-hcd xhci-hcd.0: irq 128, io mem 0x1f00200000 | |
| [ 2.097681] xhci-hcd xhci-hcd.0: xHCI Host Controller | |
| [ 2.102748] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 | |
| [ 2.110001] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed | |
| [ 2.116178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 | |
| [ 2.124481] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.131730] usb usb1: Product: xHCI Host Controller | |
| [ 2.136620] usb usb1: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.142034] usb usb1: SerialNumber: xhci-hcd.0 | |
| [ 2.146546] hub 1-0:1.0: USB hub found | |
| [ 2.150312] hub 1-0:1.0: 2 ports detected | |
| [ 2.154404] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 | |
| [ 2.162700] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.169949] usb usb2: Product: xHCI Host Controller | |
| [ 2.174839] usb usb2: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.180256] usb usb2: SerialNumber: xhci-hcd.0 | |
| [ 2.184754] hub 2-0:1.0: USB hub found | |
| [ 2.188519] hub 2-0:1.0: 1 port detected | |
| [ 2.192646] xhci-hcd xhci-hcd.1: xHCI Host Controller | |
| [ 2.197717] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 | |
| [ 2.205388] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 | |
| [ 2.214389] xhci-hcd xhci-hcd.1: irq 133, io mem 0x1f00300000 | |
| [ 2.220210] xhci-hcd xhci-hcd.1: xHCI Host Controller | |
| [ 2.225275] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 | |
| [ 2.232524] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed | |
| [ 2.238671] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 | |
| [ 2.246968] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.254217] usb usb3: Product: xHCI Host Controller | |
| [ 2.259110] usb usb3: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.264524] usb usb3: SerialNumber: xhci-hcd.1 | |
| [ 2.269024] hub 3-0:1.0: USB hub found | |
| [ 2.272788] hub 3-0:1.0: 2 ports detected | |
| [ 2.276874] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 | |
| [ 2.285171] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.292420] usb usb4: Product: xHCI Host Controller | |
| [ 2.297310] usb usb4: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.302727] usb usb4: SerialNumber: xhci-hcd.1 | |
| [ 2.307247] hub 4-0:1.0: USB hub found | |
| [ 2.311012] hub 4-0:1.0: 1 port detected | |
| [ 2.315030] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 | |
| [ 2.322819] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 | |
| [ 2.330760] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.338988] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu | |
| [ 2.347022] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu | |
| [ 2.355058] platform 1000800000.codec: Adding to iommu group 0 | |
| [ 2.360914] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu | |
| [ 2.369124] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu | |
| [ 2.377333] platform 1000880000.pisp_be: Adding to iommu group 0 | |
| [ 2.383375] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu | |
| [ 2.391234] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu | |
| [ 2.399270] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success | |
| [ 2.406248] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.414467] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success | |
| [ 2.421466] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.429676] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success | |
| [ 2.437181] of_cfs_init | |
| [ 2.439651] of_cfs_init: OK | |
| [ 2.442477] clk: Disabling unused clocks | |
| [ 2.457672] uart-pl011 107d001000.serial: no DMA platform data | |
| [ 2.469344] EXT4-fs (mmcblk0p2): mounted filesystem ff313567-e9f1-5a5d-9895-3ba130b4a864 ro with ordered data mode. Quota mode: disabled. | |
| [ 2.481758] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. | |
| [ 2.488730] Freeing unused kernel memory: 512K | |
| [ 2.493230] Run /sbin/init as init process | |
| [ 2.543006] init: Console is alive | |
| [ 2.546453] init: - watchdog - | |
| [ 2.677891] kmodloader: loading kernel modules from /etc/modules-boot.d/* | |
| [ 2.690103] kmodloader: done loading kernel modules from /etc/modules-boot.d/* | |
| [ 2.700498] init: - preinit - | |
| [ 2.753578] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) | |
| [ 2.764507] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode | |
| [ 2.775660] pps pps0: new PPS source ptp0 | |
| [ 2.779701] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. | |
| Press the [f] key and hit [enter] to enter failsafe mode | |
| Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | |
| [ 4.213311] mmc1: Skipping voltage switch | |
| [ 4.227176] mmc1: new high speed SDIO card at address 0001 | |
| [ 4.843940] mount_root: mounting /dev/root with options | |
| [ 4.936365] EXT4-fs (mmcblk0p2): re-mounted ff313567-e9f1-5a5d-9895-3ba130b4a864 r/w. Quota mode: disabled. | |
| [ 4.969288] insmod: module is already loaded - fat | |
| [ 4.974496] insmod: module is already loaded - vfat | |
| [ 4.989775] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| sh: out of range | |
| [ 5.000029] urandom-seed: Seeding with /etc/urandom.seed | |
| [ 5.015051] macb 1f00100000.ethernet: gem-ptp-timer ptp clock unregistered. | |
| [ 5.023202] procd: - early - | |
| [ 5.026100] procd: - watchdog - | |
| [ 5.540027] procd: - watchdog - | |
| [ 5.543634] procd: - ubus - | |
| [ 5.596552] procd: - init - | |
| Please press Enter to activate this console. | |
| [ 5.658686] kmodloader: loading kernel modules from /etc/modules.d/* | |
| [ 5.672251] hid: raw HID events driver (C) Jiri Kosina | |
| [ 5.677866] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 5.688325] GACT probability on | |
| [ 5.691584] Mirror/redirect action on | |
| [ 5.695875] u32 classifier | |
| [ 5.698596] input device check on | |
| [ 5.702264] Actions configured | |
| [ 5.714807] brcmutil: loading out-of-tree module taints kernel. | |
| [ 5.720891] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4 | |
| [ 5.728403] Backport generated by backports.git 193becf2 | |
| [ 5.735567] r8125 Ethernet controller driver 9.012.04-NAPI loaded | |
| [ 5.741728] r8125 0000:01:00.0: enabling device (0000 -> 0002) | |
| [ 5.761332] r8125 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00 | |
| [ 5.770943] r8125 0000:01:00.0 (unnamed net_device) (uninitialized): Random ether addr da:b2:9f:57:52:c2 | |
| [ 5.780643] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. | |
| [ 5.794128] r8125 Copyright (C) 2023 Realtek NIC software team <[email protected]> | |
| [ 5.794128] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. | |
| [ 5.794128] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. | |
| [ 5.825605] usbcore: registered new device driver r8152-cfgselector | |
| [ 5.831913] usbcore: registered new interface driver r8152 | |
| [ 5.837885] usbcore: registered new interface driver usbhid | |
| [ 5.843476] usbhid: USB HID core driver | |
| [ 5.848837] xt_time: kernel timezone is -0000 | |
| [ 5.853332] usbcore: registered new interface driver ax88179_178a | |
| [ 5.859560] usbcore: registered new interface driver cdc_ether | |
| [ 5.865586] usbcore: registered new interface driver cdc_ncm | |
| [ 5.882629] PPP generic driver version 2.4.2 | |
| [ 5.887038] NET: Registered PF_PPPOX protocol family | |
| [ 5.892511] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. | |
| [ 5.900379] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved. | |
| [ 5.915759] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 | |
| [ 5.924492] usbcore: registered new interface driver brcmfmac | |
| [ 5.930787] kmodloader: done loading kernel modules from /etc/modules.d/* | |
| [ 5.937618] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,5-model-b.bin failed with error -2 | |
| [ 5.949329] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.raspberrypi,5-model-b.bin | |
| [ 6.440607] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) | |
| [ 6.490559] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jul 29 2022 02:15:20 version 7.45.250 (70e9766 CY) FWID 01-e53e306b | |
| [ 7.089978] eth1: 0xffffffc081430000, da:b2:9f:57:52:c2, IRQ 158 | |
| [ 7.140120] br-lan: port 1(eth1) entered blocking state | |
| [ 7.145371] br-lan: port 1(eth1) entered disabled state | |
| [ 7.150635] r8125 0000:01:00.0 eth1: entered allmulticast mode | |
| [ 7.156567] r8125 0000:01:00.0 eth1: entered promiscuous mode | |
| [ 7.173448] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) | |
| [ 7.184383] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode | |
| [ 7.195169] pps pps0: new PPS source ptp0 | |
| [ 7.199241] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. | |
| [ 10.358641] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off | |
| [ 11.164354] r8125: eth1: link up | |
| [ 11.167723] br-lan: port 1(eth1) entered blocking state | |
| [ 11.172968] br-lan: port 1(eth1) entered forwarding state | |
| [ 37.647566] ------------[ cut here ]------------ | |
| [ 37.652205] NETDEV WATCHDOG: eth1 (r8125): transmit queue 0 timed out 7350 ms | |
| [ 37.659383] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:525 dev_watchdog+0x244/0x24c | |
| [ 37.667690] Modules linked in: brcmfmac_wcc(O) pppoe ppp_async nft_fib_inet nf_flow_table_inet brcmfmac(O) wireguard pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_compat nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack libchacha20poly1305 iptable_mangle iptable_filter ipt_REJECT ipt_ECN ip_tables chacha_neon cfg80211(O) cdc_ncm cdc_ether ax88179_178a xt_time xt_tcpudp xt_tcpmss xt_statistic xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_comment xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY x_tables usbnet usbhid slhc sch_cake r8152 r8125(O) poly1305_neon nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcurve25519_generic libcrc32c libchacha hid_generic crc_ccitt compat(O) brcmutil(O) sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_route cls_matchall cls_fw cls_flow cls_basic | |
| [ 37.667797] act_skbedit act_mirred act_gact snd_bcm2835(C) hid evdev pwm_fan ifb ip6_udp_tunnel udp_tunnel snd_rawmidi snd_seq_device snd_pcm_oss snd_mixer_oss snd_hwdep snd_compress snd_pcm snd_timer snd soundcore nls_utf8 nls_iso8859_1 nls_cp437 vfat fat realtek | |
| [ 37.781663] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G C O 6.6.34 #0 | |
| [ 37.789090] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) | |
| [ 37.794942] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
| [ 37.801931] pc : dev_watchdog+0x244/0x24c | |
| [ 37.805954] lr : dev_watchdog+0x244/0x24c | |
| [ 37.809975] sp : ffffffc080003e40 | |
| [ 37.813296] x29: ffffffc080003e40 x28: ffffffc080bd7678 x27: ffffffc080be50c0 | |
| [ 37.820461] x26: ffffffc080be69c0 x25: ffffffc080003f00 x24: 0000000000001cb6 | |
| [ 37.827626] x23: ffffffc080be6000 x22: 0000000000000000 x21: ffffff8102a40000 | |
| [ 37.834791] x20: ffffff810253b000 x19: ffffff8102a40440 x18: 0000000000000199 | |
| [ 37.841955] x17: 6d20303533372074 x16: 756f2064656d6974 x15: ffffffc080bfdbf0 | |
| [ 37.849120] x14: 00000000000004cb x13: 0000000000000199 x12: 00000000ffffffea | |
| [ 37.856285] x11: 00000000ffffefff x10: ffffffc080c55bf0 x9 : ffffffc080bfdb98 | |
| [ 37.863449] x8 : ffffffc080be9000 x7 : 0000000000000001 x6 : ffffffc080be9140 | |
| [ 37.870613] x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000010005 | |
| [ 37.877778] x2 : 0000000000000000 x1 : 0000000000000005 x0 : 0000000000000041 | |
| [ 37.884942] Call trace: | |
| [ 37.887390] dev_watchdog+0x244/0x24c | |
| [ 37.891063] call_timer_fn.isra.0+0x24/0x80 | |
| [ 37.895261] __run_timers.part.0+0x1f0/0x254 | |
| [ 37.899545] run_timer_softirq+0x3c/0x74 | |
| [ 37.903481] handle_softirqs+0xfc/0x230 | |
| [ 37.907327] __do_softirq+0x14/0x20 | |
| [ 37.910823] ____do_softirq+0x10/0x1c | |
| [ 37.914495] call_on_irq_stack+0x24/0x4c | |
| [ 37.918428] do_softirq_own_stack+0x1c/0x2c | |
| [ 37.922623] irq_exit_rcu+0x90/0xc8 | |
| [ 37.926118] el1_interrupt+0x38/0x54 | |
| [ 37.929704] el1h_64_irq_handler+0x18/0x24 | |
| [ 37.933812] el1h_64_irq+0x68/0x6c | |
| [ 37.937220] default_idle_call+0x28/0x3c | |
| [ 37.941154] do_idle+0x1e0/0x22c | |
| [ 37.944391] cpu_startup_entry+0x38/0x3c | |
| [ 37.948326] kernel_init+0x0/0x1e0 | |
| [ 37.951737] arch_post_acpi_subsys_init+0x0/0x8 | |
| [ 37.956281] start_kernel+0x45c/0x520 | |
| [ 37.959952] __primary_switched+0xb4/0xbc | |
| [ 37.963976] ---[ end trace 0000000000000000 ]--- | |
| [ 38.039430] br-lan: port 1(eth1) entered disabled state | |
| [ 38.063046] r8125: eth1: link down | |
| [ 42.394365] r8125: eth1: link up | |
| [ 42.397631] br-lan: port 1(eth1) entered blocking state | |
| [ 42.402876] br-lan: port 1(eth1) entered forwarding state |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| 0.26 RPi: BOOTSYS release VERSION:6fe0b091 DATE: 2024/06/05 TIME: 16:41:49 | |
| 0.30 BOOTMODE: 0x06 partition 0 build-ts BUILD_TIMESTAMP=1717602109 serial dbf81e7c boardrev d04170 stc 830782 | |
| 0.40 AON_RESET: 00000003 PM_RSTS 00001000 | |
| 0.48 RP1_BOOT chip ID: 0x20001927 | |
| 0.50 PM_RSTS: 0x00001000 | |
| 0.51 part 00000000 reset_info 00000000 | |
| 0.54 PMIC reset-event 00000000 rtc 00000000 alarm 00000000 enabled 0 | |
| 0.61 uSD voltage 3.3V | |
| 0.80 Initialising SDRAM 'Micron' 32Gb x2 total-size: 64 Gbit 4267 | |
| 0.83 DDR 4267 1 0 64 152 | |
| 2.37 OTP boardrev d04170 bootrom a a | |
| 2.38 Customer key hash 0000000000000000000000000000000000000000000000000000000000000000 | |
| 2.46 VC-JTAG unlocked | |
| 2.68 RP1_BOOT chip ID: 0x20001927 | |
| 3.78 RP1_BOOT chip ID: 0x20001927 | |
| 3.78 RP1_BOOT: fw size 25992 | |
| 3.34 PCI2 init | |
| 3.34 PCI2 reset | |
| 3.78 PCIe scan 00001de4:00000001 | |
| 3.79 RP1_CHIP_INFO 20001927 | |
| 3.82 RPi: BOOTLOADER release VERSION:6fe0b091 DATE: 2024/06/05 TIME: 16:41:49 | |
| 3.89 BOOTMODE: 0x06 partition 0 build-ts BUILD_TIMESTAMP=1717602109 serial dbf81e7c boardrev d04170 stc 3889154 | |
| 3.99 AON_RESET: 00000003 PM_RSTS 00001000 | |
| 3.27 usb_pd_init status 2 | |
| 3.33 XHCI-STOP | |
| 3.33 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.37 USBSTS 1 | |
| 3.40 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.45 xHC0 ports 3 slots 64 intrs 4 | |
| 3.57 XHCI-STOP | |
| 3.57 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.61 USBSTS 1 | |
| 3.64 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.69 xHC1 ports 3 slots 64 intrs 4 | |
| 3.77 Boot mode: SD (01) order f4 | |
| 4.91 SD HOST: 200000000 CTL0: 0x00800000 BUS: 400000 Hz actual: 390625 HZ div: 512 (256) status: 0x1fff0000 delay: 276 | |
| 4.02 SD HOST: 200000000 CTL0: 0x00800f00 BUS: 400000 Hz actual: 390625 HZ div: 512 (256) status: 0x1fff0000 delay: 276 | |
| 4.93 OCR c0ff8000 [131] | |
| CID: 001b534d303030303010a59f4e8300e8 | |
| CSD: 400e00325b590000751f7f800a404000 | |
| 4.01 SD: bus-width: 4 spec: 2 SCR: 0x02b58002 0x00000000 | |
| 4.09 SD HOST: 200000000 CTL0: 0x00800f04 BUS: 50000000 Hz actual: 50000000 HZ div: 4 (2) status: 0x1fff0000 delay: 2 | |
| 4.18 MBR: 0x00002000, 131072 type: 0x0c | |
| 4.20 MBR: 0x00024000, 212992 type: 0x83 | |
| 4.24 MBR: 0x00000000, 0 type: 0x00 | |
| 4.28 MBR: 0x00000000, 0 type: 0x00 | |
| 4.32 Trying partition: 0 | |
| 4.35 type: 16 lba: 8192 'mkfs.fat' ' V ^ ' clusters 32695 (4) | |
| 4.41 rsc 4 fat-sectors 128 root dir cluster 1 sectors 32 entries 512 | |
| 4.47 FAT16 clusters 32695 | |
| 4.51 [sdcard] autoboot.txt not found | |
| 4.53 Select partition rsts 0 C(boot_partition) 0 EEPROM config 0 result 0 | |
| 4.60 Trying partition: 0 | |
| 4.62 type: 16 lba: 8192 'mkfs.fat' ' V ^ ' clusters 32695 (4) | |
| 4.68 rsc 4 fat-sectors 128 root dir cluster 1 sectors 32 entries 512 | |
| 4.75 FAT16 clusters 32695 | |
| 4.79 Read config.txt bytes 789 hnd 0x4 | |
| 4.82 Read distroconfig.txt bytes 678 hnd 0x6 | |
| 4.86 [sdcard] pieeprom.upd not found | |
| 4.89 usb_max_current_enable default 0 max-current 1500 | |
| 4.01 Read bcm2712-rpi-5-b.dtb bytes 80322 hnd 0x1ab5 | |
| 4.03 dt-match: compatible: raspberrypi,5-model-b match: brcm,bcm2712 | |
| 4.09 dt-match: compatible: brcm,bcm2712 match: brcm,bcm2712 | |
| 4.16 Selecting USB low current limit | |
| NOTICE: BL31: v2.6(release):v2.6-239-g2a9ede0bd | |
| NOTICE: BL31: Built : 14:26:57, Jun 22 2023 | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] | |
| [ 0.000000] Linux version 6.6.34 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r26741-dcc4307205) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Fri Jun 21 18:27:53 2024 | |
| [ 0.000000] random: crng init done | |
| [ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000001000000, size 64 MiB | |
| [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x0000000001000000..0x0000000004ffffff (65536 KiB) map reusable linux,cma | |
| [ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 | |
| [ 0.000000] OF: reserved mem: 0x000000003fd16400..0x000000003fd16438 (0 KiB) nomap non-reusable nvram@0 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] | |
| [ 0.000000] node 0: [mem 0x0000000000080000-0x000000003fbfffff] | |
| [ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] | |
| [ 0.000000] On node 0, zone DMA: 1024 pages in unavailable ranges | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.2 | |
| [ 0.000000] percpu: Embedded 18 pages/cpu s36776 r8192 d28760 u73728 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: Virtualization Host Extensions | |
| [ 0.000000] CPU features: detected: Hardware dirty bit management | |
| [ 0.000000] CPU features: detected: Spectre-v4 | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=D8:3A:DD:C8:B3:5A vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyAMA10,115200 root=PARTUUID=01e84938-02 rootfstype=squashfs,ext4 rootwait | |
| [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2063360 | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 4. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) | |
| [ 0.000000] Memory: 8077352K/8384512K available (9344K kernel code, 984K rwdata, 2692K rodata, 512K init, 556K bss, 241624K reserved, 65536K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] rcu: Hierarchical RCU implementation. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns | |
| [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns | |
| [ 0.000129] Console: colour dummy device 80x25 | |
| [ 0.000133] printk: console [tty1] enabled | |
| [ 0.000256] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) | |
| [ 0.000263] pid_max: default: 32768 minimum: 301 | |
| [ 0.000380] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.000414] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.000621] cgroup: Disabling memory control group subsystem | |
| [ 0.001048] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.001129] rcu: Hierarchical SRCU implementation. | |
| [ 0.001133] rcu: Max phase no-delay instances is 1000. | |
| [ 0.001679] smp: Bringing up secondary CPUs ... | |
| [ 0.001850] Detected PIPT I-cache on CPU1 | |
| [ 0.001889] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] | |
| [ 0.002080] Detected PIPT I-cache on CPU2 | |
| [ 0.002111] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] | |
| [ 0.002297] Detected PIPT I-cache on CPU3 | |
| [ 0.002323] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] | |
| [ 0.002350] smp: Brought up 1 node, 4 CPUs | |
| [ 0.002367] SMP: Total of 4 processors activated. | |
| [ 0.002370] CPU features: detected: 32-bit EL0 Support | |
| [ 0.002374] CPU features: detected: Data cache clean to the PoU not required for I/D coherence | |
| [ 0.002379] CPU features: detected: Common not Private translations | |
| [ 0.002382] CPU features: detected: CRC32 instructions | |
| [ 0.002386] CPU features: detected: RCpc load-acquire (LDAPR) | |
| [ 0.002389] CPU features: detected: Privileged Access Never | |
| [ 0.002393] CPU features: detected: Speculative Store Bypassing Safe (SSBS) | |
| [ 0.002423] CPU: All CPU(s) started at EL2 | |
| [ 0.002426] alternatives: applying system-wide alternatives | |
| [ 0.006527] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| [ 0.006539] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
| [ 0.007267] pinctrl core: initialized pinctrl subsystem | |
| [ 0.007580] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.008021] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.008078] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.008168] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.008297] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.008306] cpuidle: using governor ladder | |
| [ 0.008314] cpuidle: using governor menu | |
| [ 0.008377] ASID allocator initialised with 65536 entries | |
| [ 0.008677] Serial: AMBA PL011 UART driver | |
| [ 0.009350] bcm2835-mbox 107c013880.mailbox: mailbox enabled | |
| [ 0.009538] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 | |
| [ 0.009552] printk: console [ttyAMA10] enabled | |
| [ 0.632435] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-06-05T15:41:49, variant start_cd | |
| [ 0.652485] raspberrypi-firmware soc:firmware: Firmware hash is 6fe0b09100000000000000000000000000000000 | |
| [ 0.665078] Modules: 29200 pages in range for non-PLT usage | |
| [ 0.665081] Modules: 520720 pages in range for PLT usage | |
| [ 0.670956] cryptd: max_cpu_qlen set to 1000 | |
| [ 0.680798] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 | |
| [ 0.688226] iommu: Default domain type: Translated | |
| [ 0.693034] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.699311] SCSI subsystem initialized | |
| [ 0.703105] usbcore: registered new interface driver usbfs | |
| [ 0.708616] usbcore: registered new interface driver hub | |
| [ 0.713953] usbcore: registered new device driver usb | |
| [ 0.719112] mc: Linux media interface: v0.10 | |
| [ 0.723400] videodev: Linux video capture interface: v2.00 | |
| [ 0.728913] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.733892] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| [ 0.743065] PTP clock support registered | |
| [ 0.747383] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.754443] NET: Registered PF_INET protocol family | |
| [ 0.759495] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 0.769436] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) | |
| [ 0.778047] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.785827] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.794056] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) | |
| [ 0.803023] TCP: Hash tables configured (established 65536 bind 65536) | |
| [ 0.809638] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) | |
| [ 0.816550] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) | |
| [ 0.823955] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.829652] PCI: CLS 0 bytes, default 64 | |
| [ 0.834044] workingset: timestamp_bits=46 max_order=21 bucket_order=0 | |
| [ 0.840692] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.846546] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
| [ 0.868007] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) | |
| [ 0.875627] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 26) | |
| [ 0.883363] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 27) | |
| [ 0.891086] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 28) | |
| [ 0.898810] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 29) | |
| [ 0.907510] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 | |
| [ 0.914348] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges: | |
| [ 0.921342] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff] | |
| [ 0.930434] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000 | |
| [ 0.938736] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000 | |
| [ 0.947038] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 0.955422] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: | |
| [ 0.962416] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] | |
| [ 0.971508] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 | |
| [ 0.979814] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 | |
| [ 0.988120] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 | |
| [ 0.996421] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 1.005827] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver. | |
| [ 1.013518] bcm2708_fb: probe of soc:fb failed with error -2 | |
| [ 1.053671] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled | |
| [ 1.060275] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 31, base_baud = 6000000) is a Broadcom BCM7271 UART | |
| [ 1.071080] iproc-rng200 107d208000.rng: hwrng registered | |
| [ 1.076532] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) | |
| [ 1.084947] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 | |
| [ 1.092741] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 | |
| [ 1.100361] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 | |
| [ 1.108152] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 | |
| [ 1.115768] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 | |
| [ 1.123558] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 | |
| [ 1.131174] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 | |
| [ 1.138963] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 | |
| [ 1.146686] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe | |
| [ 1.155503] brd: module loaded | |
| [ 1.159482] loop: module loaded | |
| [ 1.162768] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver | |
| [ 1.170871] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) | |
| [ 1.176750] usbcore: registered new interface driver uas | |
| [ 1.182090] usbcore: registered new interface driver usb-storage | |
| [ 1.188175] mousedev: PS/2 mouse device common for all mice | |
| [ 1.202219] rpi-rtc soc:rpi_rtc: registered as rtc0 | |
| [ 1.208643] rpi-rtc soc:rpi_rtc: setting system clock to 1970-01-01T00:00:08 UTC (8) | |
| [ 1.216761] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! | |
| [ 1.223318] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer | |
| [ 1.232228] sdhci: Secure Digital Host Controller Interface driver | |
| [ 1.238440] sdhci: Copyright(c) Pierre Ossman | |
| [ 1.242848] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 1.248896] NET: Registered PF_INET6 protocol family | |
| [ 1.254003] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO | |
| [ 1.254197] Segment Routing with IPv6 | |
| [ 1.262748] In-situ OAM (IOAM) with IPv6 | |
| [ 1.266692] NET: Registered PF_PACKET protocol family | |
| [ 1.271762] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. | |
| [ 1.284804] 8021q: 802.1Q VLAN Support v1.8 | |
| [ 1.292654] Key type .fscrypt registered | |
| [ 1.296586] Key type fscrypt-provisioning registered | |
| [ 1.302079] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges: | |
| [ 1.309073] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff] | |
| [ 1.318161] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000 | |
| [ 1.326457] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000 | |
| [ 1.334756] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 1.344206] brcm-pcie 1000110000.pcie: Forcing gen 2 | |
| [ 1.349345] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00 | |
| [ 1.355807] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 1.361350] pci_bus 0000:00: root bus resource [mem 0x1b00000000-0x1bfffffffb] (bus address [0x00000000-0xfffffffb]) | |
| [ 1.371919] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1affffffff pref] (bus address [0x400000000-0x6ffffffff]) | |
| [ 1.383105] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 | |
| [ 1.389150] pci 0000:00:00.0: PME# supported from D0 D3hot | |
| [ 1.395164] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 1.517385] brcm-pcie 1000110000.pcie: link up, 5.0 GT/s PCIe x1 (!SSC) | |
| [ 1.524041] pci 0000:01:00.0: [10ec:8125] type 00 class 0x020000 | |
| [ 1.530078] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] | |
| [ 1.535680] pci 0000:01:00.0: reg 0x18: [mem 0x1b00000000-0x1b0000ffff 64bit] | |
| [ 1.542850] pci 0000:01:00.0: reg 0x20: [mem 0x1b00000000-0x1b00003fff 64bit] | |
| [ 1.550095] pci 0000:01:00.0: supports D1 D2 | |
| [ 1.554374] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
| [ 1.587399] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 1.594041] pci 0000:00:00.0: BAR 8: assigned [mem 0x1b00000000-0x1b000fffff] | |
| [ 1.601204] pci 0000:01:00.0: BAR 2: assigned [mem 0x1b00000000-0x1b0000ffff 64bit] | |
| [ 1.608896] pci 0000:01:00.0: BAR 4: assigned [mem 0x1b00010000-0x1b00013fff 64bit] | |
| [ 1.616586] pci 0000:01:00.0: BAR 0: no space for [io size 0x0100] | |
| [ 1.622874] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0100] | |
| [ 1.629512] pci 0000:00:00.0: PCI bridge to [bus 01] | |
| [ 1.634490] pci 0000:00:00.0: bridge window [mem 0x1b00000000-0x1b000fffff] | |
| [ 1.641653] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 | |
| [ 1.650128] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 | |
| [ 1.658641] pcieport 0000:00:00.0: enabling device (0000 -> 0002) | |
| [ 1.664776] pcieport 0000:00:00.0: PME: Signaling with IRQ 34 | |
| [ 1.670575] pcieport 0000:00:00.0: AER: enabled with IRQ 34 | |
| [ 1.676249] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: | |
| [ 1.683240] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] | |
| [ 1.692325] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 | |
| [ 1.700623] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 | |
| [ 1.708923] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 | |
| [ 1.717220] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 1.726570] brcm-pcie 1000120000.pcie: Forcing gen 2 | |
| [ 1.731569] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0001:00 | |
| [ 1.738033] pci_bus 0001:00: root bus resource [bus 00-ff] | |
| [ 1.743535] pci_bus 0001:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) | |
| [ 1.754101] pci_bus 0001:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) | |
| [ 1.765281] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400 | |
| [ 1.771321] pci 0001:00:00.0: PME# supported from D0 D3hot | |
| [ 1.777294] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 1.897382] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) | |
| [ 1.904032] pci 0001:01:00.0: [1de4:0001] type 00 class 0x020000 | |
| [ 1.910069] pci 0001:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] | |
| [ 1.916360] pci 0001:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] | |
| [ 1.922651] pci 0001:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] | |
| [ 1.928997] pci 0001:01:00.0: supports D1 | |
| [ 1.933015] pci 0001:01:00.0: PME# supported from D0 D1 D3hot D3cold | |
| [ 1.967387] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 1.974026] pci 0001:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] | |
| [ 1.981187] pci 0001:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] | |
| [ 1.988350] pci 0001:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] | |
| [ 1.995512] pci 0001:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] | |
| [ 2.002675] pci 0001:00:00.0: PCI bridge to [bus 01] | |
| [ 2.007654] pci 0001:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] | |
| [ 2.014815] pci 0001:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 | |
| [ 2.023290] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 | |
| [ 2.031785] pcieport 0001:00:00.0: enabling device (0000 -> 0002) | |
| [ 2.037917] pcieport 0001:00:00.0: PME: Signaling with IRQ 35 | |
| [ 2.043711] pcieport 0001:00:00.0: AER: enabled with IRQ 35 | |
| [ 2.049343] rp1 0001:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 | |
| [ 2.058426] rp1 0001:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 | |
| [ 2.067688] rp1 0001:01:00.0: enabling device (0000 -> 0002) | |
| [ 2.073881] rp1 0001:01:00.0: chip_id 0x20001927 | |
| [ 2.085765] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 97 | |
| [ 2.119343] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 103 (d8:3a:dd:c8:b3:5a) | |
| [ 2.129942] xhci-hcd xhci-hcd.0: xHCI Host Controller | |
| [ 2.135012] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 | |
| [ 2.142699] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 | |
| [ 2.151708] xhci-hcd xhci-hcd.0: irq 128, io mem 0x1f00200000 | |
| [ 2.157538] xhci-hcd xhci-hcd.0: xHCI Host Controller | |
| [ 2.162605] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 | |
| [ 2.169858] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed | |
| [ 2.176021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 | |
| [ 2.184325] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.191574] usb usb1: Product: xHCI Host Controller | |
| [ 2.196465] usb usb1: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.201881] usb usb1: SerialNumber: xhci-hcd.0 | |
| [ 2.206406] hub 1-0:1.0: USB hub found | |
| [ 2.210176] hub 1-0:1.0: 2 ports detected | |
| [ 2.214272] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 | |
| [ 2.222569] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.229818] usb usb2: Product: xHCI Host Controller | |
| [ 2.234708] usb usb2: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.240125] usb usb2: SerialNumber: xhci-hcd.0 | |
| [ 2.244625] hub 2-0:1.0: USB hub found | |
| [ 2.248390] hub 2-0:1.0: 1 port detected | |
| [ 2.252510] xhci-hcd xhci-hcd.1: xHCI Host Controller | |
| [ 2.257581] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 | |
| [ 2.265252] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 | |
| [ 2.274254] xhci-hcd xhci-hcd.1: irq 133, io mem 0x1f00300000 | |
| [ 2.280077] xhci-hcd xhci-hcd.1: xHCI Host Controller | |
| [ 2.285143] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 | |
| [ 2.292393] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed | |
| [ 2.298540] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 | |
| [ 2.306836] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.314085] usb usb3: Product: xHCI Host Controller | |
| [ 2.318977] usb usb3: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.324391] usb usb3: SerialNumber: xhci-hcd.1 | |
| [ 2.328898] hub 3-0:1.0: USB hub found | |
| [ 2.332662] hub 3-0:1.0: 2 ports detected | |
| [ 2.336753] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 | |
| [ 2.345051] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.352299] usb usb4: Product: xHCI Host Controller | |
| [ 2.357188] usb usb4: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.362605] usb usb4: SerialNumber: xhci-hcd.1 | |
| [ 2.367099] hub 4-0:1.0: USB hub found | |
| [ 2.370864] hub 4-0:1.0: 1 port detected | |
| [ 2.374886] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 | |
| [ 2.382675] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 | |
| [ 2.390589] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.398825] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu | |
| [ 2.406859] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu | |
| [ 2.414895] platform 1000800000.codec: Adding to iommu group 0 | |
| [ 2.420752] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu | |
| [ 2.428962] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu | |
| [ 2.437170] platform 1000880000.pisp_be: Adding to iommu group 0 | |
| [ 2.443211] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu | |
| [ 2.451072] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu | |
| [ 2.459107] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success | |
| [ 2.466077] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.474309] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success | |
| [ 2.481311] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.489529] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success | |
| [ 2.496880] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO | |
| [ 2.496929] mmc1: CQHCI version 5.10 | |
| [ 2.505771] of_cfs_init | |
| [ 2.508237] of_cfs_init: OK | |
| [ 2.511072] clk: Disabling unused clocks | |
| [ 2.523541] uart-pl011 107d001000.serial: no DMA platform data | |
| [ 2.537826] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit | |
| [ 2.639715] mmc0: new ultra high speed DDR50 SDHC card at address 0001 | |
| [ 2.646475] mmcblk0: mmc0:0001 00000 14.6 GiB | |
| [ 2.651314] mmcblk0: p1 p2 | |
| [ 2.654148] mmcblk0: mmc0:0001 00000 14.6 GiB | |
| [ 2.697918] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit | |
| [ 2.713004] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem | |
| [ 2.720347] EXT4-fs (mmcblk0p2): write access will be enabled during recovery | |
| [ 2.792713] EXT4-fs (mmcblk0p2): recovery complete | |
| [ 2.799435] EXT4-fs (mmcblk0p2): mounted filesystem ff313567-e9f1-5a5d-9895-3ba130b4a864 ro with ordered data mode. Quota mode: disabled. | |
| [ 2.811850] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. | |
| [ 2.818808] Freeing unused kernel memory: 512K | |
| [ 2.823315] Run /sbin/init as init process | |
| [ 2.873681] init: Console is alive | |
| [ 2.877130] init: - watchdog - | |
| [ 3.012860] kmodloader: loading kernel modules from /etc/modules-boot.d/* | |
| [ 3.024818] kmodloader: done loading kernel modules from /etc/modules-boot.d/* | |
| [ 3.041249] init: - preinit - | |
| [ 3.094149] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) | |
| [ 3.105082] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode | |
| [ 3.116321] pps pps0: new PPS source ptp0 | |
| [ 3.120385] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. | |
| Press the [f] key and hit [enter] to enter failsafe mode | |
| Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | |
| [ 4.913203] mmc1: Skipping voltage switch | |
| [ 4.927189] mmc1: new high speed SDIO card at address 0001 | |
| [ 5.233669] mount_root: mounting /dev/root with options | |
| [ 5.318471] EXT4-fs (mmcblk0p2): re-mounted ff313567-e9f1-5a5d-9895-3ba130b4a864 r/w. Quota mode: disabled. | |
| [ 5.352216] insmod: module is already loaded - fat | |
| [ 5.357453] insmod: module is already loaded - vfat | |
| [ 5.372761] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| sh: out of range | |
| [ 5.383002] urandom-seed: Seeding with /etc/urandom.seed | |
| [ 5.397762] macb 1f00100000.ethernet: gem-ptp-timer ptp clock unregistered. | |
| [ 5.405663] procd: - early - | |
| [ 5.408598] procd: - watchdog - | |
| [ 5.921395] procd: - watchdog - | |
| [ 5.925007] procd: - ubus - | |
| [ 6.078115] procd: - init - | |
| Please press Enter to activate this console. | |
| [ 6.135752] kmodloader: loading kernel modules from /etc/modules.d/* | |
| [ 6.149947] hid: raw HID events driver (C) Jiri Kosina | |
| [ 6.155580] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 6.166155] GACT probability on | |
| [ 6.169420] Mirror/redirect action on | |
| [ 6.173723] u32 classifier | |
| [ 6.176432] input device check on | |
| [ 6.180138] Actions configured | |
| [ 6.192710] brcmutil: loading out-of-tree module taints kernel. | |
| [ 6.198798] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4 | |
| [ 6.206308] Backport generated by backports.git 193becf2 | |
| [ 6.213614] r8125 Ethernet controller driver 9.013.02-NAPI loaded | |
| [ 6.219782] r8125 0000:01:00.0: enabling device (0000 -> 0002) | |
| [ 6.239699] r8125 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00 | |
| [ 6.249307] r8125 0000:01:00.0 (unnamed net_device) (uninitialized): Random ether addr c6:db:c2:b3:84:2c | |
| [ 6.259032] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. | |
| [ 6.272509] r8125 Copyright (C) 2024 Realtek NIC software team <[email protected]> | |
| [ 6.272509] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. | |
| [ 6.272509] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. | |
| [ 6.303943] usbcore: registered new device driver r8152-cfgselector | |
| [ 6.310259] usbcore: registered new interface driver r8152 | |
| [ 6.316194] usbcore: registered new interface driver usbhid | |
| [ 6.321787] usbhid: USB HID core driver | |
| [ 6.327112] xt_time: kernel timezone is -0000 | |
| [ 6.331615] usbcore: registered new interface driver ax88179_178a | |
| [ 6.337852] usbcore: registered new interface driver cdc_ether | |
| [ 6.343878] usbcore: registered new interface driver cdc_ncm | |
| [ 6.361100] PPP generic driver version 2.4.2 | |
| [ 6.365513] NET: Registered PF_PPPOX protocol family | |
| [ 6.371025] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. | |
| [ 6.378902] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved. | |
| [ 6.394705] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 | |
| [ 6.403490] usbcore: registered new interface driver brcmfmac | |
| [ 6.409848] kmodloader: done loading kernel modules from /etc/modules.d/* | |
| [ 6.416782] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,5-model-b.bin failed with error -2 | |
| [ 6.428489] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.raspberrypi,5-model-b.bin | |
| [ 6.980702] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) | |
| [ 7.031919] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jul 29 2022 02:15:20 version 7.45.250 (70e9766 CY) FWID 01-e53e306b | |
| [ 7.227709] eth1: 0xffffffc0814b0000, c6:db:c2:b3:84:2c, IRQ 158 | |
| [ 7.280699] br-lan: port 1(eth1) entered blocking state | |
| [ 7.285946] br-lan: port 1(eth1) entered disabled state | |
| [ 7.291199] r8125 0000:01:00.0 eth1: entered allmulticast mode | |
| [ 7.297361] r8125 0000:01:00.0 eth1: entered promiscuous mode | |
| [ 7.313332] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) | |
| [ 7.324266] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode | |
| [ 7.334986] pps pps0: new PPS source ptp0 | |
| [ 7.339034] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. | |
| [ 10.438529] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off | |
| [ 11.125456] r8125: eth1: link up | |
| [ 11.128955] br-lan: port 1(eth1) entered blocking state | |
| [ 11.134198] br-lan: port 1(eth1) entered forwarding state | |
| [ 15.571659] eth1: cmd = 0xff, should be 0x06 | |
| [ 15.571659] . | |
| [ 15.571667] eth1: pci link is down | |
| [ 15.571667] . | |
| [ 17.699748] eth1: cmd = 0xff, should be 0x06 | |
| [ 17.699748] . | |
| [ 17.939408] eth1: esd_flag = 0x0001 | |
| [ 17.939408] . | |
| [ 17.998570] br-lan: port 1(eth1) entered disabled state | |
| [ 22.095470] r8125: eth1: link up | |
| [ 22.098995] br-lan: port 1(eth1) entered blocking state | |
| [ 22.104240] br-lan: port 1(eth1) entered forwarding state | |
| [ 23.878069] r8125: eth1: link down | |
| [ 23.896526] br-lan: port 1(eth1) entered disabled state | |
| [ 24.197388] eth1: cmd = 0xff, should be 0x06 | |
| [ 24.197388] . | |
| [ 24.197394] eth1: pci link is down | |
| [ 24.197394] . | |
| [ 26.282480] eth1: cmd = 0xff, should be 0x06 | |
| [ 26.282480] . |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| 0.26 RPi: BOOTSYS release VERSION:6fe0b091 DATE: 2024/06/05 TIME: 16:41:49 | |
| 0.30 BOOTMODE: 0x06 partition 0 build-ts BUILD_TIMESTAMP=1717602109 serial dbf81e7c boardrev d04170 stc 830690 | |
| 0.40 AON_RESET: 00000003 PM_RSTS 00001000 | |
| 0.48 RP1_BOOT chip ID: 0x20001927 | |
| 0.50 PM_RSTS: 0x00001000 | |
| 0.51 part 00000000 reset_info 00000000 | |
| 0.54 PMIC reset-event 00000000 rtc 00000000 alarm 00000000 enabled 0 | |
| 0.61 uSD voltage 3.3V | |
| 0.80 Initialising SDRAM 'Micron' 32Gb x2 total-size: 64 Gbit 4267 | |
| 0.83 DDR 4267 1 0 64 152 | |
| 2.17 OTP boardrev d04170 bootrom a a | |
| 2.18 Customer key hash 0000000000000000000000000000000000000000000000000000000000000000 | |
| 2.25 VC-JTAG unlocked | |
| 2.48 RP1_BOOT chip ID: 0x20001927 | |
| 3.58 RP1_BOOT chip ID: 0x20001927 | |
| 3.58 RP1_BOOT: fw size 25992 | |
| 3.14 PCI2 init | |
| 3.14 PCI2 reset | |
| 3.58 PCIe scan 00001de4:00000001 | |
| 3.59 RP1_CHIP_INFO 20001927 | |
| 3.61 RPi: BOOTLOADER release VERSION:6fe0b091 DATE: 2024/06/05 TIME: 16:41:49 | |
| 3.68 BOOTMODE: 0x06 partition 0 build-ts BUILD_TIMESTAMP=1717602109 serial dbf81e7c boardrev d04170 stc 3868994 | |
| 3.79 AON_RESET: 00000003 PM_RSTS 00001000 | |
| 3.08 usb_pd_init status 2 | |
| 3.12 XHCI-STOP | |
| 3.13 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.17 USBSTS 1 | |
| 3.20 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.25 xHC0 ports 3 slots 64 intrs 4 | |
| 3.37 XHCI-STOP | |
| 3.37 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.41 USBSTS 1 | |
| 3.44 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.49 xHC1 ports 3 slots 64 intrs 4 | |
| 3.56 Boot mode: SD (01) order f4 | |
| 4.71 SD HOST: 200000000 CTL0: 0x00800000 BUS: 400000 Hz actual: 390625 HZ div: 512 (256) status: 0x1fff0000 delay: 276 | |
| 4.82 SD HOST: 200000000 CTL0: 0x00800f00 BUS: 400000 Hz actual: 390625 HZ div: 512 (256) status: 0x1fff0000 delay: 276 | |
| 4.75 OCR c0ff8000 [133] | |
| CID: 001b534d303030303010a59f4e8300e8 | |
| CSD: 400e00325b590000751f7f800a404000 | |
| 4.82 SD: bus-width: 4 spec: 2 SCR: 0x02b58002 0x00000000 | |
| 4.90 SD HOST: 200000000 CTL0: 0x00800f04 BUS: 50000000 Hz actual: 50000000 HZ div: 4 (2) status: 0x1fff0000 delay: 2 | |
| 4.99 MBR: 0x00002000, 131072 type: 0x0c | |
| 4.01 MBR: 0x00024000, 212992 type: 0x83 | |
| 4.05 MBR: 0x00000000, 0 type: 0x00 | |
| 4.09 MBR: 0x00000000, 0 type: 0x00 | |
| 4.13 Trying partition: 0 | |
| 4.16 type: 16 lba: 8192 'mkfs.fat' ' V ^ ' clusters 32695 (4) | |
| 4.22 rsc 4 fat-sectors 128 root dir cluster 1 sectors 32 entries 512 | |
| 4.28 FAT16 clusters 32695 | |
| 4.32 [sdcard] autoboot.txt not found | |
| 4.34 Select partition rsts 0 C(boot_partition) 0 EEPROM config 0 result 0 | |
| 4.41 Trying partition: 0 | |
| 4.43 type: 16 lba: 8192 'mkfs.fat' ' V ^ ' clusters 32695 (4) | |
| 4.49 rsc 4 fat-sectors 128 root dir cluster 1 sectors 32 entries 512 | |
| 4.56 FAT16 clusters 32695 | |
| 4.60 Read config.txt bytes 789 hnd 0x5 | |
| 4.63 Read distroconfig.txt bytes 678 hnd 0x6 | |
| 4.68 pieeprom.sig | |
| 4.69 hash: df0ada9c05933ea8a58cce3870bfe64fee69f1695e7a25268d817c267e24bb1b | |
| 4.76 ts: 1718992466 | |
| 5.01 SELF-UPDATE timestamp current 1718992466 new 1718992466 skip | |
| 5.05 usb_max_current_enable default 0 max-current 1500 | |
| 5.16 Read bcm2712-rpi-5-b.dtb bytes 80322 hnd 0x1ab5 | |
| 5.18 dt-match: compatible: raspberrypi,5-model-b match: brcm,bcm2712 | |
| 5.25 dt-match: compatible: brcm,bcm2712 match: brcm,bcm2712 | |
| 5.31 Selecting USB low current limit | |
| NOTICE: BL31: v2.6(release):v2.6-239-g2a9ede0bd | |
| NOTICE: BL31: Built : 14:26:57, Jun 22 2023 | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] | |
| [ 0.000000] Linux version 6.6.34 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r26730-17099f2760) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Thu Jun 20 12:06:41 2024 | |
| [ 0.000000] random: crng init done | |
| [ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000001000000, size 64 MiB | |
| [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x0000000001000000..0x0000000004ffffff (65536 KiB) map reusable linux,cma | |
| [ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 | |
| [ 0.000000] OF: reserved mem: 0x000000003fd16400..0x000000003fd16438 (0 KiB) nomap non-reusable nvram@0 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] | |
| [ 0.000000] node 0: [mem 0x0000000000080000-0x000000003fbfffff] | |
| [ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] | |
| [ 0.000000] On node 0, zone DMA: 1024 pages in unavailable ranges | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.2 | |
| [ 0.000000] percpu: Embedded 18 pages/cpu s36776 r8192 d28760 u73728 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: Virtualization Host Extensions | |
| [ 0.000000] CPU features: detected: Hardware dirty bit management | |
| [ 0.000000] CPU features: detected: Spectre-v4 | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=D8:3A:DD:C8:B3:5A vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyAMA10,115200 root=PARTUUID=bccdb37e-02 rootfstype=squashfs,ext4 pcie_aspm=off rootwait | |
| [ 0.000000] PCIe ASPM is disabled | |
| [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2063360 | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 4. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) | |
| [ 0.000000] Memory: 8077352K/8384512K available (9344K kernel code, 984K rwdata, 2692K rodata, 512K init, 556K bss, 241624K reserved, 65536K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] rcu: Hierarchical RCU implementation. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns | |
| [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns | |
| [ 0.000133] Console: colour dummy device 80x25 | |
| [ 0.000137] printk: console [tty1] enabled | |
| [ 0.000263] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) | |
| [ 0.000270] pid_max: default: 32768 minimum: 301 | |
| [ 0.000388] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.000423] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.000634] cgroup: Disabling memory control group subsystem | |
| [ 0.001057] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.001137] rcu: Hierarchical SRCU implementation. | |
| [ 0.001141] rcu: Max phase no-delay instances is 1000. | |
| [ 0.001684] smp: Bringing up secondary CPUs ... | |
| [ 0.001856] Detected PIPT I-cache on CPU1 | |
| [ 0.001895] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] | |
| [ 0.002086] Detected PIPT I-cache on CPU2 | |
| [ 0.002118] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] | |
| [ 0.002299] Detected PIPT I-cache on CPU3 | |
| [ 0.002326] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] | |
| [ 0.002351] smp: Brought up 1 node, 4 CPUs | |
| [ 0.002368] SMP: Total of 4 processors activated. | |
| [ 0.002372] CPU features: detected: 32-bit EL0 Support | |
| [ 0.002376] CPU features: detected: Data cache clean to the PoU not required for I/D coherence | |
| [ 0.002381] CPU features: detected: Common not Private translations | |
| [ 0.002384] CPU features: detected: CRC32 instructions | |
| [ 0.002388] CPU features: detected: RCpc load-acquire (LDAPR) | |
| [ 0.002391] CPU features: detected: Privileged Access Never | |
| [ 0.002395] CPU features: detected: Speculative Store Bypassing Safe (SSBS) | |
| [ 0.002426] CPU: All CPU(s) started at EL2 | |
| [ 0.002429] alternatives: applying system-wide alternatives | |
| [ 0.006514] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| [ 0.006528] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
| [ 0.007265] pinctrl core: initialized pinctrl subsystem | |
| [ 0.007583] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.008023] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.008080] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.008167] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.008295] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.008304] cpuidle: using governor ladder | |
| [ 0.008312] cpuidle: using governor menu | |
| [ 0.008378] ASID allocator initialised with 65536 entries | |
| [ 0.008681] Serial: AMBA PL011 UART driver | |
| [ 0.009353] bcm2835-mbox 107c013880.mailbox: mailbox enabled | |
| [ 0.009540] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 | |
| [ 0.009553] printk: console [ttyAMA10] enabled | |
| [ 0.636976] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-06-05T15:41:49, variant start_cd | |
| [ 0.657025] raspberrypi-firmware soc:firmware: Firmware hash is 6fe0b09100000000000000000000000000000000 | |
| [ 0.669619] Modules: 29200 pages in range for non-PLT usage | |
| [ 0.669622] Modules: 520720 pages in range for PLT usage | |
| [ 0.675500] cryptd: max_cpu_qlen set to 1000 | |
| [ 0.685342] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 | |
| [ 0.692774] iommu: Default domain type: Translated | |
| [ 0.697580] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.703855] SCSI subsystem initialized | |
| [ 0.707650] usbcore: registered new interface driver usbfs | |
| [ 0.713162] usbcore: registered new interface driver hub | |
| [ 0.718499] usbcore: registered new device driver usb | |
| [ 0.723658] mc: Linux media interface: v0.10 | |
| [ 0.727946] videodev: Linux video capture interface: v2.00 | |
| [ 0.733459] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.738438] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| [ 0.747611] PTP clock support registered | |
| [ 0.751926] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.758991] NET: Registered PF_INET protocol family | |
| [ 0.764032] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 0.773971] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) | |
| [ 0.782583] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.790362] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.798595] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) | |
| [ 0.807600] TCP: Hash tables configured (established 65536 bind 65536) | |
| [ 0.814214] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) | |
| [ 0.821126] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) | |
| [ 0.828530] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.834225] PCI: CLS 0 bytes, default 64 | |
| [ 0.838574] workingset: timestamp_bits=46 max_order=21 bucket_order=0 | |
| [ 0.845223] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.851076] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
| [ 0.872550] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) | |
| [ 0.880160] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 26) | |
| [ 0.887897] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 27) | |
| [ 0.895623] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 28) | |
| [ 0.903348] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 29) | |
| [ 0.912056] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 | |
| [ 0.918895] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges: | |
| [ 0.925888] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff] | |
| [ 0.934980] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000 | |
| [ 0.943283] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000 | |
| [ 0.951584] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 0.959943] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: | |
| [ 0.966936] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] | |
| [ 0.976029] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 | |
| [ 0.984334] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 | |
| [ 0.992639] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 | |
| [ 1.000940] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 1.010344] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver. | |
| [ 1.018035] bcm2708_fb: probe of soc:fb failed with error -2 | |
| [ 1.058183] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled | |
| [ 1.064786] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 31, base_baud = 6000000) is a Broadcom BCM7271 UART | |
| [ 1.075572] iproc-rng200 107d208000.rng: hwrng registered | |
| [ 1.081022] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) | |
| [ 1.089440] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 | |
| [ 1.097232] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 | |
| [ 1.104852] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 | |
| [ 1.112644] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 | |
| [ 1.120259] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 | |
| [ 1.128049] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 | |
| [ 1.135665] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 | |
| [ 1.143453] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 | |
| [ 1.151174] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe | |
| [ 1.159983] brd: module loaded | |
| [ 1.163971] loop: module loaded | |
| [ 1.167258] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver | |
| [ 1.175322] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) | |
| [ 1.181188] usbcore: registered new interface driver uas | |
| [ 1.186528] usbcore: registered new interface driver usb-storage | |
| [ 1.192602] mousedev: PS/2 mouse device common for all mice | |
| [ 1.206644] rpi-rtc soc:rpi_rtc: registered as rtc0 | |
| [ 1.213066] rpi-rtc soc:rpi_rtc: setting system clock to 1970-01-01T00:00:09 UTC (9) | |
| [ 1.221191] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! | |
| [ 1.227759] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer | |
| [ 1.236686] sdhci: Secure Digital Host Controller Interface driver | |
| [ 1.242893] sdhci: Copyright(c) Pierre Ossman | |
| [ 1.247299] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 1.253343] NET: Registered PF_INET6 protocol family | |
| [ 1.258451] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO | |
| [ 1.258650] Segment Routing with IPv6 | |
| [ 1.267195] In-situ OAM (IOAM) with IPv6 | |
| [ 1.271139] NET: Registered PF_PACKET protocol family | |
| [ 1.276211] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. | |
| [ 1.289257] 8021q: 802.1Q VLAN Support v1.8 | |
| [ 1.297125] Key type .fscrypt registered | |
| [ 1.301058] Key type fscrypt-provisioning registered | |
| [ 1.306572] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges: | |
| [ 1.313567] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff] | |
| [ 1.322654] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000 | |
| [ 1.330950] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000 | |
| [ 1.339250] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 1.348701] brcm-pcie 1000110000.pcie: Forcing gen 3 | |
| [ 1.353838] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00 | |
| [ 1.360300] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 1.365845] pci_bus 0000:00: root bus resource [mem 0x1b00000000-0x1bfffffffb] (bus address [0x00000000-0xfffffffb]) | |
| [ 1.376414] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1affffffff pref] (bus address [0x400000000-0x6ffffffff]) | |
| [ 1.387600] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 | |
| [ 1.393646] pci 0000:00:00.0: PME# supported from D0 D3hot | |
| [ 1.399652] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 1.521928] brcm-pcie 1000110000.pcie: link up, 5.0 GT/s PCIe x1 (!SSC) | |
| [ 1.528585] pci 0000:01:00.0: [10ec:8125] type 00 class 0x020000 | |
| [ 1.534622] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] | |
| [ 1.540224] pci 0000:01:00.0: reg 0x18: [mem 0x1b00000000-0x1b0000ffff 64bit] | |
| [ 1.547393] pci 0000:01:00.0: reg 0x20: [mem 0x1b00000000-0x1b00003fff 64bit] | |
| [ 1.554638] pci 0000:01:00.0: supports D1 D2 | |
| [ 1.558917] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
| [ 1.565680] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 1.572324] pci 0000:00:00.0: BAR 8: assigned [mem 0x1b00000000-0x1b000fffff] | |
| [ 1.579484] pci 0000:01:00.0: BAR 2: assigned [mem 0x1b00000000-0x1b0000ffff 64bit] | |
| [ 1.587176] pci 0000:01:00.0: BAR 4: assigned [mem 0x1b00010000-0x1b00013fff 64bit] | |
| [ 1.594866] pci 0000:01:00.0: BAR 0: no space for [io size 0x0100] | |
| [ 1.601154] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0100] | |
| [ 1.607791] pci 0000:00:00.0: PCI bridge to [bus 01] | |
| [ 1.612770] pci 0000:00:00.0: bridge window [mem 0x1b00000000-0x1b000fffff] | |
| [ 1.619931] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 | |
| [ 1.628406] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 | |
| [ 1.636919] pcieport 0000:00:00.0: enabling device (0000 -> 0002) | |
| [ 1.643060] pcieport 0000:00:00.0: PME: Signaling with IRQ 34 | |
| [ 1.648861] pcieport 0000:00:00.0: AER: enabled with IRQ 34 | |
| [ 1.654530] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: | |
| [ 1.661517] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] | |
| [ 1.670602] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 | |
| [ 1.678899] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 | |
| [ 1.687197] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 | |
| [ 1.695493] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 1.704838] brcm-pcie 1000120000.pcie: Forcing gen 2 | |
| [ 1.709834] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0001:00 | |
| [ 1.716297] pci_bus 0001:00: root bus resource [bus 00-ff] | |
| [ 1.721799] pci_bus 0001:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) | |
| [ 1.732364] pci_bus 0001:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) | |
| [ 1.743545] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400 | |
| [ 1.749584] pci 0001:00:00.0: PME# supported from D0 D3hot | |
| [ 1.755556] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 1.881926] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) | |
| [ 1.888580] pci 0001:01:00.0: [1de4:0001] type 00 class 0x020000 | |
| [ 1.894618] pci 0001:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] | |
| [ 1.900911] pci 0001:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] | |
| [ 1.907204] pci 0001:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] | |
| [ 1.913556] pci 0001:01:00.0: supports D1 | |
| [ 1.917574] pci 0001:01:00.0: PME# supported from D0 D1 D3hot D3cold | |
| [ 1.924018] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 1.930659] pci 0001:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] | |
| [ 1.937822] pci 0001:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] | |
| [ 1.944988] pci 0001:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] | |
| [ 1.952152] pci 0001:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] | |
| [ 1.959316] pci 0001:00:00.0: PCI bridge to [bus 01] | |
| [ 1.964296] pci 0001:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] | |
| [ 1.971459] pci 0001:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 | |
| [ 1.979936] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 | |
| [ 1.988441] pcieport 0001:00:00.0: enabling device (0000 -> 0002) | |
| [ 1.994580] pcieport 0001:00:00.0: PME: Signaling with IRQ 35 | |
| [ 2.000385] pcieport 0001:00:00.0: AER: enabled with IRQ 35 | |
| [ 2.006014] rp1 0001:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 | |
| [ 2.015096] rp1 0001:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 | |
| [ 2.024354] rp1 0001:01:00.0: enabling device (0000 -> 0002) | |
| [ 2.030493] rp1 0001:01:00.0: chip_id 0x20001927 | |
| [ 2.039038] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 97 | |
| [ 2.073809] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 103 (d8:3a:dd:c8:b3:5a) | |
| [ 2.084410] xhci-hcd xhci-hcd.0: xHCI Host Controller | |
| [ 2.089483] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 | |
| [ 2.097165] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 | |
| [ 2.106168] xhci-hcd xhci-hcd.0: irq 128, io mem 0x1f00200000 | |
| [ 2.111985] xhci-hcd xhci-hcd.0: xHCI Host Controller | |
| [ 2.117051] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 | |
| [ 2.124301] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed | |
| [ 2.130449] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 | |
| [ 2.138747] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.145996] usb usb1: Product: xHCI Host Controller | |
| [ 2.150886] usb usb1: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.156301] usb usb1: SerialNumber: xhci-hcd.0 | |
| [ 2.160814] hub 1-0:1.0: USB hub found | |
| [ 2.164577] hub 1-0:1.0: 2 ports detected | |
| [ 2.168667] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 | |
| [ 2.176970] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.184218] usb usb2: Product: xHCI Host Controller | |
| [ 2.189108] usb usb2: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.194525] usb usb2: SerialNumber: xhci-hcd.0 | |
| [ 2.199072] hub 2-0:1.0: USB hub found | |
| [ 2.202836] hub 2-0:1.0: 1 port detected | |
| [ 2.206937] xhci-hcd xhci-hcd.1: xHCI Host Controller | |
| [ 2.212009] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 | |
| [ 2.219680] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 | |
| [ 2.228681] xhci-hcd xhci-hcd.1: irq 133, io mem 0x1f00300000 | |
| [ 2.234497] xhci-hcd xhci-hcd.1: xHCI Host Controller | |
| [ 2.239562] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 | |
| [ 2.246811] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed | |
| [ 2.253044] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 | |
| [ 2.261339] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.268588] usb usb3: Product: xHCI Host Controller | |
| [ 2.273484] usb usb3: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.278898] usb usb3: SerialNumber: xhci-hcd.1 | |
| [ 2.283492] hub 3-0:1.0: USB hub found | |
| [ 2.287252] hub 3-0:1.0: 2 ports detected | |
| [ 2.291337] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 | |
| [ 2.299634] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.306881] usb usb4: Product: xHCI Host Controller | |
| [ 2.311771] usb usb4: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.317189] usb usb4: SerialNumber: xhci-hcd.1 | |
| [ 2.321839] hub 4-0:1.0: USB hub found | |
| [ 2.325599] hub 4-0:1.0: 1 port detected | |
| [ 2.329617] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 | |
| [ 2.337406] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 | |
| [ 2.345511] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.353741] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu | |
| [ 2.361774] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu | |
| [ 2.369811] platform 1000800000.codec: Adding to iommu group 0 | |
| [ 2.375670] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu | |
| [ 2.383879] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu | |
| [ 2.392090] platform 1000880000.pisp_be: Adding to iommu group 0 | |
| [ 2.398128] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu | |
| [ 2.405987] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu | |
| [ 2.414024] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success | |
| [ 2.421184] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.429406] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success | |
| [ 2.436394] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.444610] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success | |
| [ 2.452068] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO | |
| [ 2.452135] mmc1: CQHCI version 5.10 | |
| [ 2.452378] of_cfs_init | |
| [ 2.452396] of_cfs_init: OK | |
| [ 2.452435] clk: Disabling unused clocks | |
| [ 2.469925] uart-pl011 107d001000.serial: no DMA platform data | |
| [ 2.496722] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit | |
| [ 2.598554] mmc0: new ultra high speed DDR50 SDHC card at address 0001 | |
| [ 2.605306] mmcblk0: mmc0:0001 00000 14.6 GiB | |
| [ 2.610134] mmcblk0: p1 p2 | |
| [ 2.612973] mmcblk0: mmc0:0001 00000 14.6 GiB | |
| [ 2.662457] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit | |
| [ 2.679334] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem | |
| [ 2.686681] EXT4-fs (mmcblk0p2): write access will be enabled during recovery | |
| [ 2.727669] EXT4-fs (mmcblk0p2): recovery complete | |
| [ 2.734383] EXT4-fs (mmcblk0p2): mounted filesystem ff313567-e9f1-5a5d-9895-3ba130b4a864 ro with ordered data mode. Quota mode: disabled. | |
| [ 2.746799] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. | |
| [ 2.753770] Freeing unused kernel memory: 512K | |
| [ 2.758259] Run /sbin/init as init process | |
| [ 2.808072] init: Console is alive | |
| [ 2.811522] init: - watchdog - | |
| [ 2.940864] kmodloader: loading kernel modules from /etc/modules-boot.d/* | |
| [ 2.953291] kmodloader: done loading kernel modules from /etc/modules-boot.d/* | |
| [ 2.965593] init: - preinit - | |
| [ 3.017791] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) | |
| [ 3.028722] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode | |
| [ 3.038798] pps pps0: new PPS source ptp0 | |
| [ 3.042839] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. | |
| Press the [f] key and hit [enter] to enter failsafe mode | |
| Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | |
| [ 4.877747] mmc1: Skipping voltage switch | |
| [ 4.891741] mmc1: new high speed SDIO card at address 0001 | |
| [ 5.108206] mount_root: mounting /dev/root with options | |
| [ 5.173005] EXT4-fs (mmcblk0p2): re-mounted ff313567-e9f1-5a5d-9895-3ba130b4a864 r/w. Quota mode: disabled. | |
| [ 5.206588] insmod: module is already loaded - fat | |
| [ 5.211785] insmod: module is already loaded - vfat | |
| [ 5.248732] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| sh: out of range | |
| [ 5.259203] urandom-seed: Seeding with /etc/urandom.seed | |
| [ 5.273674] macb 1f00100000.ethernet: gem-ptp-timer ptp clock unregistered. | |
| [ 5.281542] procd: - early - | |
| [ 5.284469] procd: - watchdog - | |
| [ 5.797636] procd: - watchdog - | |
| [ 5.801239] procd: - ubus - | |
| [ 5.954321] procd: - init - | |
| Please press Enter to activate this console. | |
| [ 6.014739] kmodloader: loading kernel modules from /etc/modules.d/* | |
| [ 6.029649] hid: raw HID events driver (C) Jiri Kosina | |
| [ 6.035339] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 6.045818] GACT probability on | |
| [ 6.049080] Mirror/redirect action on | |
| [ 6.053806] u32 classifier | |
| [ 6.056517] input device check on | |
| [ 6.060185] Actions configured | |
| [ 6.072648] brcmutil: loading out-of-tree module taints kernel. | |
| [ 6.078713] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4 | |
| [ 6.086232] Backport generated by backports.git 193becf2 | |
| [ 6.093037] usbcore: registered new device driver r8152-cfgselector | |
| [ 6.099337] usbcore: registered new interface driver r8152 | |
| [ 6.105382] r8169 0000:01:00.0: enabling device (0000 -> 0002) | |
| [ 6.142333] r8169 0000:01:00.0: can't read MAC address, setting random one | |
| [ 6.165791] r8169 0000:01:00.0 eth1: RTL8125B, 5a:c7:2c:cf:a0:77, XID 641, IRQ 158 | |
| [ 6.173407] r8169 0000:01:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko] | |
| [ 6.182669] usbcore: registered new interface driver usbhid | |
| [ 6.188265] usbhid: USB HID core driver | |
| [ 6.193871] xt_time: kernel timezone is -0000 | |
| [ 6.198404] usbcore: registered new interface driver ax88179_178a | |
| [ 6.204699] usbcore: registered new interface driver cdc_ether | |
| [ 6.210747] usbcore: registered new interface driver cdc_ncm | |
| [ 6.228569] PPP generic driver version 2.4.2 | |
| [ 6.233008] NET: Registered PF_PPPOX protocol family | |
| [ 6.238418] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. | |
| [ 6.246290] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved. | |
| [ 6.261717] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 | |
| [ 6.270472] usbcore: registered new interface driver brcmfmac | |
| [ 6.276278] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,5-model-b.bin failed with error -2 | |
| [ 6.287985] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.raspberrypi,5-model-b.bin | |
| [ 6.299284] kmodloader: done loading kernel modules from /etc/modules.d/* | |
| [ 6.830535] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) | |
| [ 6.875138] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jul 29 2022 02:15:20 version 7.45.250 (70e9766 CY) FWID 01-e53e306b | |
| [ 7.221931] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) | |
| [ 7.582142] r8169 0000:01:00.0 eth1: Link is Down | |
| [ 7.586967] br-lan: port 1(eth1) entered blocking state | |
| [ 7.592217] br-lan: port 1(eth1) entered disabled state | |
| [ 7.597466] r8169 0000:01:00.0 eth1: entered allmulticast mode | |
| [ 7.603437] r8169 0000:01:00.0 eth1: entered promiscuous mode | |
| [ 7.630440] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) | |
| [ 7.641375] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode | |
| [ 7.651452] pps pps0: new PPS source ptp0 | |
| [ 7.655510] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. | |
| [ 10.753031] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off | |
| [ 11.094733] r8169 0000:01:00.0 eth1: Link is Up - 2.5Gbps/Full - flow control off | |
| [ 11.102277] br-lan: port 1(eth1) entered blocking state | |
| [ 11.107522] br-lan: port 1(eth1) entered forwarding state | |
| [ 62.271933] ------------[ cut here ]------------ | |
| [ 62.276573] NETDEV WATCHDOG: eth1 (r8169): transmit queue 0 timed out 9590 ms | |
| [ 62.283752] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:525 dev_watchdog+0x244/0x24c | |
| [ 62.292058] Modules linked in: brcmfmac_wcc(O) pppoe ppp_async nft_fib_inet nf_flow_table_inet brcmfmac(O) wireguard pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack libchacha20poly1305 iptable_mangle iptable_filter ipt_REJECT ipt_ECN ip_tables chacha_neon cfg80211(O) cdc_ncm cdc_ether ax88179_178a xt_time xt_tcpudp xt_tcpmss xt_statistic xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_comment xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY x_tables usbnet usbhid slhc sch_cake r8169 r8152 poly1305_neon nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcurve25519_generic libcrc32c libchacha hid_generic crc_ccitt compat(O) brcmutil(O) sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit | |
| [ 62.292161] act_mirred act_gact snd_bcm2835(C) hid evdev pwm_fan ifb ip6_udp_tunnel udp_tunnel snd_rawmidi snd_seq_device snd_pcm_oss snd_pcm_dmaengine snd_mixer_oss snd_hwdep snd_compress snd_pcm snd_timer snd soundcore nls_utf8 kpp nls_iso8859_1 nls_cp437 vfat fat realtek | |
| [ 62.406724] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G C O 6.6.34 #0 | |
| [ 62.414150] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) | |
| [ 62.420001] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
| [ 62.426990] pc : dev_watchdog+0x244/0x24c | |
| [ 62.431012] lr : dev_watchdog+0x244/0x24c | |
| [ 62.435034] sp : ffffffc080003e40 | |
| [ 62.438354] x29: ffffffc080003e40 x28: ffffffc080c57678 x27: ffffffc080c650c0 | |
| [ 62.445519] x26: ffffffc080c669c0 x25: ffffffc080003f00 x24: 0000000000002576 | |
| [ 62.452683] x23: ffffffc080c66000 x22: 0000000000000000 x21: ffffff8100f48000 | |
| [ 62.459847] x20: ffffff8100829800 x19: ffffff8100f484c0 x18: 000000000000019f | |
| [ 62.467011] x17: 6d20303935392074 x16: 756f2064656d6974 x15: ffffffc080c7de30 | |
| [ 62.474175] x14: 00000000000004dd x13: 000000000000019f x12: 00000000ffffffea | |
| [ 62.481339] x11: 00000000ffffefff x10: ffffffc080cd5e30 x9 : ffffffc080c7ddd8 | |
| [ 62.488503] x8 : ffffffc080c69000 x7 : 0000000000000001 x6 : ffffffc080c691c0 | |
| [ 62.495667] x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000010005 | |
| [ 62.502831] x2 : 0000000000000000 x1 : 0000000000000005 x0 : 0000000000000041 | |
| [ 62.509994] Call trace: | |
| [ 62.512442] dev_watchdog+0x244/0x24c | |
| [ 62.516115] call_timer_fn.isra.0+0x24/0x80 | |
| [ 62.520314] __run_timers.part.0+0x1f0/0x254 | |
| [ 62.524597] run_timer_softirq+0x3c/0x74 | |
| [ 62.528531] handle_softirqs+0xfc/0x230 | |
| [ 62.532377] __do_softirq+0x14/0x20 | |
| [ 62.535874] ____do_softirq+0x10/0x1c | |
| [ 62.539545] call_on_irq_stack+0x24/0x4c | |
| [ 62.543478] do_softirq_own_stack+0x1c/0x2c | |
| [ 62.547672] irq_exit_rcu+0x90/0xc8 | |
| [ 62.551168] el1_interrupt+0x38/0x54 | |
| [ 62.554754] el1h_64_irq_handler+0x18/0x24 | |
| [ 62.558863] el1h_64_irq+0x68/0x6c | |
| [ 62.562271] default_idle_call+0x28/0x3c | |
| [ 62.566204] do_idle+0x1e0/0x22c | |
| [ 62.569441] cpu_startup_entry+0x34/0x3c | |
| [ 62.573375] kernel_init+0x0/0x1e0 | |
| [ 62.576783] arch_post_acpi_subsys_init+0x0/0x8 | |
| [ 62.581329] start_kernel+0x45c/0x520 | |
| [ 62.585001] __primary_switched+0xb4/0xbc | |
| [ 62.589021] ---[ end trace 0000000000000000 ]--- | |
| BusyBox v1.36.1 (2024-06-18 21:02:17 UTC) built-in shell (ash) | |
| _______ ________ __ | |
| | |.-----.-----.-----.| | | |.----.| |_ | |
| | - || _ | -__| || | | || _|| _| | |
| |_______|| __|_____|__|__||________||__| |____| | |
| |__| W I R E L E S S F R E E D O M | |
| ----------------------------------------------------- | |
| OpenWrt SNAPSHOT, r26730-17099f2760 | |
| ----------------------------------------------------- | |
| root@rpi5:/# reboot | |
| root@rpi5:/# [ 173.324270] br-lan: port 1(eth1) entered disabled state | |
| [ 173.330364] r8169 0000:01:00.0 eth1: left allmulticast mode | |
| [ 173.335982] r8169 0000:01:00.0 eth1: left promiscuous mode | |
| [ 173.341529] br-lan: port 1(eth1) entered disabled state | |
| [ 173.382122] r8169 0000:01:00.0 eth1: Link is Down | |
| [ 173.399682] r8169 0000:01:00.0 eth1: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100). | |
| [ 174.091957] macb 1f00100000.ethernet eth0: Link is Down | |
| [ 174.098019] macb 1f00100000.ethernet: gem-ptp-timer ptp clock unregistered. | |
| [ 174.637212] EXT4-fs (mmcblk0p2): re-mounted ff313567-e9f1-5a5d-9895-3ba130b4a864 ro. Quota mode: disabled. | |
| [ 177.684598] reboot: Restarting system |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| 0.27 RPi: BOOTSYS release VERSION:6fe0b091 DATE: 2024/06/05 TIME: 16:41:49 | |
| 0.31 BOOTMODE: 0x06 partition 0 build-ts BUILD_TIMESTAMP=1717602109 serial dbf81e7c boardrev d04170 stc 831388 | |
| 0.41 AON_RESET: 00000003 PM_RSTS 00001020 | |
| 0.48 RP1_BOOT chip ID: 0x20001927 | |
| 0.51 PM_RSTS: 0x00001020 | |
| 0.51 part 00000000 reset_info 00000000 | |
| 0.55 PMIC reset-event 00000000 rtc 6676bf26 alarm 00000000 enabled 0 | |
| 0.61 uSD voltage 3.3V | |
| 0.80 Initialising SDRAM 'Micron' 32Gb x2 total-size: 64 Gbit 4267 | |
| 0.83 DDR 4267 1 0 64 152 | |
| 2.17 OTP boardrev d04170 bootrom a a | |
| 2.18 Customer key hash 0000000000000000000000000000000000000000000000000000000000000000 | |
| 2.25 VC-JTAG unlocked | |
| 2.48 RP1_BOOT chip ID: 0x20001927 | |
| 3.58 RP1_BOOT chip ID: 0x20001927 | |
| 3.58 RP1_BOOT: fw size 25992 | |
| 3.13 PCI2 init | |
| 3.13 PCI2 reset | |
| 3.58 PCIe scan 00001de4:00000001 | |
| 3.59 RP1_CHIP_INFO 20001927 | |
| 3.61 RPi: BOOTLOADER release VERSION:6fe0b091 DATE: 2024/06/05 TIME: 16:41:49 | |
| 3.68 BOOTMODE: 0x06 partition 0 build-ts BUILD_TIMESTAMP=1717602109 serial dbf81e7c boardrev d04170 stc 3868725 | |
| 3.78 AON_RESET: 00000003 PM_RSTS 00001020 | |
| 3.07 usb_pd_init status 3 | |
| 3.07 USB_PD CONFIG 0 41 | |
| 3.13 XHCI-STOP | |
| 3.13 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.18 USBSTS 1 | |
| 3.20 xHC0 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.25 xHC0 ports 3 slots 64 intrs 4 | |
| 3.37 XHCI-STOP | |
| 3.37 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.42 USBSTS 1 | |
| 3.45 xHC1 ver: 272 HCS: 03000440 140000f1 07ff000a HCC: 0240fe6d | |
| 3.49 xHC1 ports 3 slots 64 intrs 4 | |
| 3.57 Boot mode: SD (01) order f4 | |
| 4.72 SD HOST: 200000000 CTL0: 0x00800000 BUS: 400000 Hz actual: 390625 HZ div: 512 (256) status: 0x1fff0000 delay: 276 | |
| 4.83 SD HOST: 200000000 CTL0: 0x00800f00 BUS: 400000 Hz actual: 390625 HZ div: 512 (256) status: 0x1fff0000 delay: 276 | |
| 4.75 OCR c0ff8000 [133] | |
| CID: 001b534d303030303010a59f4e8300e8 | |
| CSD: 400e00325b590000751f7f800a404000 | |
| 4.83 SD: bus-width: 4 spec: 2 SCR: 0x02b58002 0x00000000 | |
| 4.91 SD HOST: 200000000 CTL0: 0x00800f04 BUS: 50000000 Hz actual: 50000000 HZ div: 4 (2) status: 0x1fff0000 delay: 2 | |
| 4.01 MBR: 0x00002000, 131072 type: 0x0c | |
| 4.02 MBR: 0x00024000, 212992 type: 0x83 | |
| 4.06 MBR: 0x00000000, 0 type: 0x00 | |
| 4.10 MBR: 0x00000000, 0 type: 0x00 | |
| 4.14 Trying partition: 0 | |
| 4.16 type: 16 lba: 8192 'mkfs.fat' ' V ^ ' clusters 32695 (4) | |
| 4.22 rsc 4 fat-sectors 128 root dir cluster 1 sectors 32 entries 512 | |
| 4.29 FAT16 clusters 32695 | |
| 4.33 [sdcard] autoboot.txt not found | |
| 4.35 Select partition rsts 0 C(boot_partition) 0 EEPROM config 0 result 0 | |
| 4.41 Trying partition: 0 | |
| 4.44 type: 16 lba: 8192 'mkfs.fat' ' V ^ ' clusters 32695 (4) | |
| 4.50 rsc 4 fat-sectors 128 root dir cluster 1 sectors 32 entries 512 | |
| 4.57 FAT16 clusters 32695 | |
| 4.61 Read config.txt bytes 789 hnd 0x5 | |
| 4.64 Read distroconfig.txt bytes 678 hnd 0x6 | |
| 4.69 pieeprom.sig | |
| 4.70 hash: df0ada9c05933ea8a58cce3870bfe64fee69f1695e7a25268d817c267e24bb1b | |
| 4.76 ts: 1718992466 | |
| 5.02 SELF-UPDATE timestamp current 1718992466 new 1718992466 skip | |
| 5.05 usb_max_current_enable default 0 max-current 3000 | |
| 5.17 Read bcm2712-rpi-5-b.dtb bytes 80322 hnd 0x1ab5 | |
| 5.19 dt-match: compatible: raspberrypi,5-model-b match: brcm,bcm2712 | |
| 5.25 dt-match: compatible: brcm,bcm2712 match: brcm,bcm2712 | |
| 5.32 Selecting USB low current limit | |
| NOTICE: BL31: v2.6(release):v2.6-239-g2a9ede0bd | |
| NOTICE: BL31: Built : 14:26:57, Jun 22 2023 | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1] | |
| [ 0.000000] Linux version 6.6.34 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r26730-17099f2760) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Thu Jun 20 12:06:41 2024 | |
| [ 0.000000] random: crng init done | |
| [ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0 | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000001000000, size 64 MiB | |
| [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x0000000001000000..0x0000000004ffffff (65536 KiB) map reusable linux,cma | |
| [ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0 | |
| [ 0.000000] OF: reserved mem: 0x000000003fd16400..0x000000003fd16438 (0 KiB) nomap non-reusable nvram@0 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff] | |
| [ 0.000000] node 0: [mem 0x0000000000080000-0x000000003fbfffff] | |
| [ 0.000000] node 0: [mem 0x0000000040000000-0x00000001ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] | |
| [ 0.000000] On node 0, zone DMA: 1024 pages in unavailable ranges | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. | |
| [ 0.000000] psci: SMC Calling Convention v1.2 | |
| [ 0.000000] percpu: Embedded 18 pages/cpu s36776 r8192 d28760 u73728 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: Virtualization Host Extensions | |
| [ 0.000000] CPU features: detected: Hardware dirty bit management | |
| [ 0.000000] CPU features: detected: Spectre-v4 | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=D8:3A:DD:C8:B3:5A vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyAMA10,115200 root=PARTUUID=bccdb37e-02 rootfstype=squashfs,ext4 rootwait | |
| [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2063360 | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 4. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB) | |
| [ 0.000000] Memory: 8077352K/8384512K available (9344K kernel code, 984K rwdata, 2692K rodata, 512K init, 556K bss, 241624K reserved, 65536K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] rcu: Hierarchical RCU implementation. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns | |
| [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns | |
| [ 0.000133] Console: colour dummy device 80x25 | |
| [ 0.000138] printk: console [tty1] enabled | |
| [ 0.000258] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) | |
| [ 0.000265] pid_max: default: 32768 minimum: 301 | |
| [ 0.000379] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.000411] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
| [ 0.000618] cgroup: Disabling memory control group subsystem | |
| [ 0.001040] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.001123] rcu: Hierarchical SRCU implementation. | |
| [ 0.001127] rcu: Max phase no-delay instances is 1000. | |
| [ 0.001668] smp: Bringing up secondary CPUs ... | |
| [ 0.001841] Detected PIPT I-cache on CPU1 | |
| [ 0.001878] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1] | |
| [ 0.002064] Detected PIPT I-cache on CPU2 | |
| [ 0.002095] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1] | |
| [ 0.002273] Detected PIPT I-cache on CPU3 | |
| [ 0.002300] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1] | |
| [ 0.002327] smp: Brought up 1 node, 4 CPUs | |
| [ 0.002344] SMP: Total of 4 processors activated. | |
| [ 0.002348] CPU features: detected: 32-bit EL0 Support | |
| [ 0.002351] CPU features: detected: Data cache clean to the PoU not required for I/D coherence | |
| [ 0.002356] CPU features: detected: Common not Private translations | |
| [ 0.002359] CPU features: detected: CRC32 instructions | |
| [ 0.002363] CPU features: detected: RCpc load-acquire (LDAPR) | |
| [ 0.002366] CPU features: detected: Privileged Access Never | |
| [ 0.002371] CPU features: detected: Speculative Store Bypassing Safe (SSBS) | |
| [ 0.002401] CPU: All CPU(s) started at EL2 | |
| [ 0.002404] alternatives: applying system-wide alternatives | |
| [ 0.006493] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
| [ 0.006506] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) | |
| [ 0.007238] pinctrl core: initialized pinctrl subsystem | |
| [ 0.007552] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.007991] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.008048] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.008134] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.008264] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.008272] cpuidle: using governor ladder | |
| [ 0.008280] cpuidle: using governor menu | |
| [ 0.008343] ASID allocator initialised with 65536 entries | |
| [ 0.008646] Serial: AMBA PL011 UART driver | |
| [ 0.009314] bcm2835-mbox 107c013880.mailbox: mailbox enabled | |
| [ 0.009501] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2 | |
| [ 0.009514] printk: console [ttyAMA10] enabled | |
| [ 0.632402] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-06-05T15:41:49, variant start_cd | |
| [ 0.652452] raspberrypi-firmware soc:firmware: Firmware hash is 6fe0b09100000000000000000000000000000000 | |
| [ 0.665043] Modules: 29200 pages in range for non-PLT usage | |
| [ 0.665046] Modules: 520720 pages in range for PLT usage | |
| [ 0.670923] cryptd: max_cpu_qlen set to 1000 | |
| [ 0.680762] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1 | |
| [ 0.688192] iommu: Default domain type: Translated | |
| [ 0.692999] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.699277] SCSI subsystem initialized | |
| [ 0.703072] usbcore: registered new interface driver usbfs | |
| [ 0.708582] usbcore: registered new interface driver hub | |
| [ 0.713920] usbcore: registered new device driver usb | |
| [ 0.719077] mc: Linux media interface: v0.10 | |
| [ 0.723365] videodev: Linux video capture interface: v2.00 | |
| [ 0.728876] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.733856] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| [ 0.743029] PTP clock support registered | |
| [ 0.747345] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.754404] NET: Registered PF_INET protocol family | |
| [ 0.759455] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 0.769388] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) | |
| [ 0.777997] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.785775] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.794008] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) | |
| [ 0.802980] TCP: Hash tables configured (established 65536 bind 65536) | |
| [ 0.809597] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) | |
| [ 0.816509] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) | |
| [ 0.823912] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.829610] PCI: CLS 0 bytes, default 64 | |
| [ 0.834015] workingset: timestamp_bits=46 max_order=21 bucket_order=0 | |
| [ 0.840663] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.846516] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. | |
| [ 0.867975] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) | |
| [ 0.875596] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 26) | |
| [ 0.883332] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 27) | |
| [ 0.891056] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 28) | |
| [ 0.898782] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 29) | |
| [ 0.907478] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 | |
| [ 0.914318] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges: | |
| [ 0.921311] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff] | |
| [ 0.930403] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000 | |
| [ 0.938706] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000 | |
| [ 0.947008] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 0.955392] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: | |
| [ 0.962385] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] | |
| [ 0.971477] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 | |
| [ 0.979784] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 | |
| [ 0.988089] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 | |
| [ 0.996390] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 1.005797] bcm2708_fb soc:fb: Unable to determine number of FBs. Disabling driver. | |
| [ 1.013488] bcm2708_fb: probe of soc:fb failed with error -2 | |
| [ 1.053626] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled | |
| [ 1.060229] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 31, base_baud = 6000000) is a Broadcom BCM7271 UART | |
| [ 1.071031] iproc-rng200 107d208000.rng: hwrng registered | |
| [ 1.076484] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB) | |
| [ 1.084898] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040 | |
| [ 1.092692] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1 | |
| [ 1.100312] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040 | |
| [ 1.108104] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2 | |
| [ 1.115719] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020 | |
| [ 1.123509] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3 | |
| [ 1.131125] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020 | |
| [ 1.138914] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4 | |
| [ 1.146636] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe | |
| [ 1.155452] brd: module loaded | |
| [ 1.159434] loop: module loaded | |
| [ 1.162719] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver | |
| [ 1.170805] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) | |
| [ 1.176683] usbcore: registered new interface driver uas | |
| [ 1.182023] usbcore: registered new interface driver usb-storage | |
| [ 1.188106] mousedev: PS/2 mouse device common for all mice | |
| [ 1.202152] rpi-rtc soc:rpi_rtc: registered as rtc0 | |
| [ 1.208571] rpi-rtc soc:rpi_rtc: setting system clock to 2024-06-22T12:10:23 UTC (1719058223) | |
| [ 1.217478] bcm2835-wdt bcm2835-wdt: Poweroff handler already present! | |
| [ 1.224031] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer | |
| [ 1.232940] sdhci: Secure Digital Host Controller Interface driver | |
| [ 1.239154] sdhci: Copyright(c) Pierre Ossman | |
| [ 1.243562] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 1.249603] NET: Registered PF_INET6 protocol family | |
| [ 1.254707] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO | |
| [ 1.254904] Segment Routing with IPv6 | |
| [ 1.263449] In-situ OAM (IOAM) with IPv6 | |
| [ 1.267394] NET: Registered PF_PACKET protocol family | |
| [ 1.272463] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. | |
| [ 1.285505] 8021q: 802.1Q VLAN Support v1.8 | |
| [ 1.293334] Key type .fscrypt registered | |
| [ 1.297267] Key type fscrypt-provisioning registered | |
| [ 1.302757] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges: | |
| [ 1.309751] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff] | |
| [ 1.318839] brcm-pcie 1000110000.pcie: MEM 0x1b00000000..0x1bfffffffb -> 0x0000000000 | |
| [ 1.327135] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1affffffff -> 0x0400000000 | |
| [ 1.335434] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 1.344885] brcm-pcie 1000110000.pcie: Forcing gen 2 | |
| [ 1.350024] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00 | |
| [ 1.356486] pci_bus 0000:00: root bus resource [bus 00-ff] | |
| [ 1.362027] pci_bus 0000:00: root bus resource [mem 0x1b00000000-0x1bfffffffb] (bus address [0x00000000-0xfffffffb]) | |
| [ 1.372596] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1affffffff pref] (bus address [0x400000000-0x6ffffffff]) | |
| [ 1.383781] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400 | |
| [ 1.389825] pci 0000:00:00.0: PME# supported from D0 D3hot | |
| [ 1.395833] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 1.517348] brcm-pcie 1000110000.pcie: link up, 5.0 GT/s PCIe x1 (!SSC) | |
| [ 1.524005] pci 0000:01:00.0: [10ec:8125] type 00 class 0x020000 | |
| [ 1.530043] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] | |
| [ 1.535645] pci 0000:01:00.0: reg 0x18: [mem 0x1b00000000-0x1b0000ffff 64bit] | |
| [ 1.542814] pci 0000:01:00.0: reg 0x20: [mem 0x1b00000000-0x1b00003fff 64bit] | |
| [ 1.550058] pci 0000:01:00.0: supports D1 D2 | |
| [ 1.554337] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold | |
| [ 1.587360] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 1.594003] pci 0000:00:00.0: BAR 8: assigned [mem 0x1b00000000-0x1b000fffff] | |
| [ 1.601165] pci 0000:01:00.0: BAR 2: assigned [mem 0x1b00000000-0x1b0000ffff 64bit] | |
| [ 1.608857] pci 0000:01:00.0: BAR 4: assigned [mem 0x1b00010000-0x1b00013fff 64bit] | |
| [ 1.616546] pci 0000:01:00.0: BAR 0: no space for [io size 0x0100] | |
| [ 1.622835] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0100] | |
| [ 1.629472] pci 0000:00:00.0: PCI bridge to [bus 01] | |
| [ 1.634450] pci 0000:00:00.0: bridge window [mem 0x1b00000000-0x1b000fffff] | |
| [ 1.641613] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 | |
| [ 1.650088] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 | |
| [ 1.658602] pcieport 0000:00:00.0: enabling device (0000 -> 0002) | |
| [ 1.664736] pcieport 0000:00:00.0: PME: Signaling with IRQ 34 | |
| [ 1.670536] pcieport 0000:00:00.0: AER: enabled with IRQ 34 | |
| [ 1.676210] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges: | |
| [ 1.683200] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff] | |
| [ 1.692286] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000 | |
| [ 1.700583] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000 | |
| [ 1.708883] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000 | |
| [ 1.717181] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000 | |
| [ 1.726530] brcm-pcie 1000120000.pcie: Forcing gen 2 | |
| [ 1.731529] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0001:00 | |
| [ 1.737993] pci_bus 0001:00: root bus resource [bus 00-ff] | |
| [ 1.743495] pci_bus 0001:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb]) | |
| [ 1.754061] pci_bus 0001:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff]) | |
| [ 1.765241] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400 | |
| [ 1.771281] pci 0001:00:00.0: PME# supported from D0 D3hot | |
| [ 1.777257] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring | |
| [ 1.897345] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC) | |
| [ 1.903995] pci 0001:01:00.0: [1de4:0001] type 00 class 0x020000 | |
| [ 1.910032] pci 0001:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff] | |
| [ 1.916323] pci 0001:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff] | |
| [ 1.922615] pci 0001:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff] | |
| [ 1.928961] pci 0001:01:00.0: supports D1 | |
| [ 1.932979] pci 0001:01:00.0: PME# supported from D0 D1 D3hot D3cold | |
| [ 1.967349] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01 | |
| [ 1.973988] pci 0001:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff] | |
| [ 1.981150] pci 0001:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff] | |
| [ 1.988313] pci 0001:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff] | |
| [ 1.995474] pci 0001:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff] | |
| [ 2.002637] pci 0001:00:00.0: PCI bridge to [bus 01] | |
| [ 2.007616] pci 0001:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff] | |
| [ 2.014777] pci 0001:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512 | |
| [ 2.023252] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512 | |
| [ 2.031748] pcieport 0001:00:00.0: enabling device (0000 -> 0002) | |
| [ 2.037880] pcieport 0001:00:00.0: PME: Signaling with IRQ 35 | |
| [ 2.043674] pcieport 0001:00:00.0: AER: enabled with IRQ 35 | |
| [ 2.049308] rp1 0001:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200 | |
| [ 2.058390] rp1 0001:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200 | |
| [ 2.067652] rp1 0001:01:00.0: enabling device (0000 -> 0002) | |
| [ 2.073839] rp1 0001:01:00.0: chip_id 0x20001927 | |
| [ 2.082505] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 97 | |
| [ 2.119278] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 103 (d8:3a:dd:c8:b3:5a) | |
| [ 2.129961] xhci-hcd xhci-hcd.0: xHCI Host Controller | |
| [ 2.135035] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1 | |
| [ 2.142713] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 | |
| [ 2.151718] xhci-hcd xhci-hcd.0: irq 128, io mem 0x1f00200000 | |
| [ 2.157542] xhci-hcd xhci-hcd.0: xHCI Host Controller | |
| [ 2.162607] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2 | |
| [ 2.169859] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed | |
| [ 2.176012] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 | |
| [ 2.184314] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.191563] usb usb1: Product: xHCI Host Controller | |
| [ 2.196454] usb usb1: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.201869] usb usb1: SerialNumber: xhci-hcd.0 | |
| [ 2.206385] hub 1-0:1.0: USB hub found | |
| [ 2.210151] hub 1-0:1.0: 2 ports detected | |
| [ 2.214246] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 | |
| [ 2.222542] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.229792] usb usb2: Product: xHCI Host Controller | |
| [ 2.234682] usb usb2: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.240099] usb usb2: SerialNumber: xhci-hcd.0 | |
| [ 2.244599] hub 2-0:1.0: USB hub found | |
| [ 2.248364] hub 2-0:1.0: 1 port detected | |
| [ 2.252488] xhci-hcd xhci-hcd.1: xHCI Host Controller | |
| [ 2.257558] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3 | |
| [ 2.265231] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810 | |
| [ 2.274233] xhci-hcd xhci-hcd.1: irq 133, io mem 0x1f00300000 | |
| [ 2.280056] xhci-hcd xhci-hcd.1: xHCI Host Controller | |
| [ 2.285122] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4 | |
| [ 2.292371] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed | |
| [ 2.298516] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 | |
| [ 2.306811] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.314060] usb usb3: Product: xHCI Host Controller | |
| [ 2.318953] usb usb3: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.324367] usb usb3: SerialNumber: xhci-hcd.1 | |
| [ 2.328870] hub 3-0:1.0: USB hub found | |
| [ 2.332635] hub 3-0:1.0: 2 ports detected | |
| [ 2.336723] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06 | |
| [ 2.345019] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| [ 2.352268] usb usb4: Product: xHCI Host Controller | |
| [ 2.357158] usb usb4: Manufacturer: Linux 6.6.34 xhci-hcd | |
| [ 2.362575] usb usb4: SerialNumber: xhci-hcd.1 | |
| [ 2.367142] hub 4-0:1.0: USB hub found | |
| [ 2.370906] hub 4-0:1.0: 1 port detected | |
| [ 2.374927] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000 | |
| [ 2.382715] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0 | |
| [ 2.390676] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.398924] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu | |
| [ 2.406958] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu | |
| [ 2.414995] platform 1000800000.codec: Adding to iommu group 0 | |
| [ 2.420852] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu | |
| [ 2.429061] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu | |
| [ 2.437269] platform 1000880000.pisp_be: Adding to iommu group 0 | |
| [ 2.443307] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu | |
| [ 2.451167] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu | |
| [ 2.459202] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success | |
| [ 2.466176] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.474395] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success | |
| [ 2.481363] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774 | |
| [ 2.489595] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success | |
| [ 2.496936] mmc1: CQHCI version 5.10 | |
| [ 2.497420] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO | |
| [ 2.500916] of_cfs_init | |
| [ 2.508050] of_cfs_init: OK | |
| [ 2.510878] clk: Disabling unused clocks | |
| [ 2.526459] uart-pl011 107d001000.serial: no DMA platform data | |
| [ 2.537407] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit | |
| [ 2.637024] mmc0: new ultra high speed DDR50 SDHC card at address 0001 | |
| [ 2.643876] mmcblk0: mmc0:0001 00000 14.6 GiB | |
| [ 2.648722] mmcblk0: p1 p2 | |
| [ 2.651560] mmcblk0: mmc0:0001 00000 14.6 GiB | |
| [ 2.697876] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit | |
| [ 2.711888] EXT4-fs (mmcblk0p2): mounted filesystem ff313567-e9f1-5a5d-9895-3ba130b4a864 ro with ordered data mode. Quota mode: disabled. | |
| [ 2.724303] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. | |
| [ 2.731279] Freeing unused kernel memory: 512K | |
| [ 2.735766] Run /sbin/init as init process | |
| [ 2.785852] init: Console is alive | |
| [ 2.789310] init: - watchdog - | |
| [ 2.918754] kmodloader: loading kernel modules from /etc/modules-boot.d/* | |
| [ 2.931228] kmodloader: done loading kernel modules from /etc/modules-boot.d/* | |
| [ 2.943363] init: - preinit - | |
| [ 2.995924] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) | |
| [ 3.006862] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode | |
| [ 3.017037] pps pps0: new PPS source ptp0 | |
| [ 3.021083] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. | |
| Press the [f] key and hit [enter] to enter failsafe mode | |
| Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level | |
| [ 4.913166] mmc1: Skipping voltage switch | |
| [ 4.927143] mmc1: new high speed SDIO card at address 0001 | |
| [ 5.113664] mount_root: mounting /dev/root with options | |
| [ 5.237230] EXT4-fs (mmcblk0p2): re-mounted ff313567-e9f1-5a5d-9895-3ba130b4a864 r/w. Quota mode: disabled. | |
| [ 5.269705] insmod: module is already loaded - fat | |
| [ 5.274926] insmod: module is already loaded - vfat | |
| [ 5.311647] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| sh: out of range | |
| [ 5.322095] urandom-seed: Seeding with /etc/urandom.seed | |
| [ 5.337205] macb 1f00100000.ethernet: gem-ptp-timer ptp clock unregistered. | |
| [ 5.345073] procd: - early - | |
| [ 5.347983] procd: - watchdog - | |
| [ 5.860819] procd: - watchdog - | |
| [ 5.864430] procd: - ubus - | |
| [ 6.017522] procd: - init - | |
| Please press Enter to activate this console. | |
| [ 6.075189] kmodloader: loading kernel modules from /etc/modules.d/* | |
| [ 6.089928] hid: raw HID events driver (C) Jiri Kosina | |
| [ 6.095565] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. | |
| [ 6.106067] GACT probability on | |
| [ 6.109366] Mirror/redirect action on | |
| [ 6.113673] u32 classifier | |
| [ 6.116382] input device check on | |
| [ 6.120058] Actions configured | |
| [ 6.132570] brcmutil: loading out-of-tree module taints kernel. | |
| [ 6.138642] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4 | |
| [ 6.146151] Backport generated by backports.git 193becf2 | |
| [ 6.153083] usbcore: registered new device driver r8152-cfgselector | |
| [ 6.159385] usbcore: registered new interface driver r8152 | |
| [ 6.165438] r8169 0000:01:00.0: enabling device (0000 -> 0002) | |
| [ 6.197935] r8169 0000:01:00.0: can't read MAC address, setting random one | |
| [ 6.220802] r8169 0000:01:00.0 eth1: RTL8125B, c6:4c:1a:1f:63:29, XID 641, IRQ 158 | |
| [ 6.228427] r8169 0000:01:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko] | |
| [ 6.237710] usbcore: registered new interface driver usbhid | |
| [ 6.243313] usbhid: USB HID core driver | |
| [ 6.249435] xt_time: kernel timezone is -0000 | |
| [ 6.254008] usbcore: registered new interface driver ax88179_178a | |
| [ 6.260288] usbcore: registered new interface driver cdc_ether | |
| [ 6.266331] usbcore: registered new interface driver cdc_ncm | |
| [ 6.283762] PPP generic driver version 2.4.2 | |
| [ 6.288452] NET: Registered PF_PPPOX protocol family | |
| [ 6.293950] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. | |
| [ 6.301819] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved. | |
| [ 6.317427] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 | |
| [ 6.326166] usbcore: registered new interface driver brcmfmac | |
| [ 6.332475] kmodloader: done loading kernel modules from /etc/modules.d/* | |
| [ 6.339497] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,5-model-b.bin failed with error -2 | |
| [ 6.351209] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.raspberrypi,5-model-b.bin | |
| [ 6.860494] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) | |
| [ 6.909980] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jul 29 2022 02:15:20 version 7.45.250 (70e9766 CY) FWID 01-e53e306b | |
| [ 7.797352] RTL8226B_RTL8221B 2.5Gbps PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) | |
| [ 8.147580] r8169 0000:01:00.0 eth1: Link is Down | |
| [ 8.162170] br-lan: port 1(eth1) entered blocking state | |
| [ 8.167424] br-lan: port 1(eth1) entered disabled state | |
| [ 8.172680] r8169 0000:01:00.0 eth1: entered allmulticast mode | |
| [ 8.178653] r8169 0000:01:00.0 eth1: entered promiscuous mode | |
| [ 8.196980] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL) | |
| [ 8.207916] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode | |
| [ 8.218830] pps pps0: new PPS source ptp0 | |
| [ 8.222870] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered. | |
| [ 10.981745] brcmfmac mmc1:0001:1 phy0-ap0: renamed from wlan0 | |
| [ 11.318758] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off | |
| [ 11.776300] r8169 0000:01:00.0 eth1: Link is Up - 2.5Gbps/Full - flow control off | |
| [ 11.920868] br-lan: port 2(phy0-ap0) entered blocking state | |
| [ 11.926484] br-lan: port 2(phy0-ap0) entered disabled state | |
| [ 11.932113] brcmfmac mmc1:0001:1 phy0-ap0: entered allmulticast mode | |
| [ 11.938578] brcmfmac mmc1:0001:1 phy0-ap0: entered promiscuous mode | |
| [ 11.944911] br-lan: port 2(phy0-ap0) entered blocking state | |
| [ 11.950516] br-lan: port 2(phy0-ap0) entered forwarding state | |
| [ 11.956442] br-lan: port 2(phy0-ap0) entered disabled state | |
| [ 11.962141] br-lan: port 1(eth1) entered blocking state | |
| [ 11.967388] br-lan: port 1(eth1) entered forwarding state | |
| BusyBox v1.36.1 (2024-06-18 21:02:17 UTC) built-in shell (ash) | |
| _______ ________ __ | |
| | |.-----.-----.-----.| | | |.----.| |_ | |
| | - || _ | -__| || | | || _|| _| | |
| |_______|| __|_____|__|__||________||__| |_[ 15.567353] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout | |
| ___| | |
| |__| W I[ 15.574792] ieee80211 phy0: brcmf_cfg80211_start_ap: SET SSID error (-110) | |
| R E L E S S F R E E D O M | |
| ----------------------------------------------------- | |
| OpenWrt SNAPSHOT, r26730-17099f2760 | |
| ----------------------------------------------------- | |
| root@rpi5:/# [ 15.837409] brcmfmac mmc1:0001:1 phy0-ap0: left allmulticast mode | |
| [ 15.843534] brcmfmac mmc1:0001:1 phy0-ap0: left promiscuous mode | |
| [ 15.849599] br-lan: port 2(phy0-ap0) entered disabled state | |
| [ 47.317347] ------------[ cut here ]------------ | |
| [ 47.321990] NETDEV WATCHDOG: eth1 (r8169): transmit queue 0 timed out 5350 ms | |
| [ 47.329167] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:525 dev_watchdog+0x244/0x24c | |
| [ 47.337474] Modules linked in: brcmfmac_wcc(O) pppoe ppp_async nft_fib_inet nf_flow_table_inet brcmfmac(O) wireguard pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack libchacha20poly1305 iptable_mangle iptable_filter ipt_REJECT ipt_ECN ip_tables chacha_neon cfg80211(O) cdc_ncm cdc_ether ax88179_178a xt_time xt_tcpudp xt_tcpmss xt_statistic xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_comment xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY x_tables usbnet usbhid slhc sch_cake r8169 r8152 poly1305_neon nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcurve25519_generic libcrc32c libchacha hid_generic crc_ccitt compat(O) brcmutil(O) sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit | |
| [ 47.337584] act_mirred act_gact snd_bcm2835(C) hid evdev pwm_fan ifb ip6_udp_tunnel udp_tunnel snd_rawmidi snd_seq_device snd_pcm_oss snd_pcm_dmaengine snd_mixer_oss snd_hwdep snd_compress snd_pcm snd_timer snd soundcore nls_utf8 kpp nls_iso8859_1 nls_cp437 vfat fat realtek | |
| [ 47.452147] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G C O 6.6.34 #0 | |
| [ 47.459573] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) | |
| [ 47.465425] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | |
| [ 47.472414] pc : dev_watchdog+0x244/0x24c | |
| [ 47.476436] lr : dev_watchdog+0x244/0x24c | |
| [ 47.480457] sp : ffffffc080003e40 | |
| [ 47.483778] x29: ffffffc080003e40 x28: ffffffc080c57678 x27: ffffffc080c650c0 | |
| [ 47.490942] x26: ffffffc080c669c0 x25: ffffffc080003f00 x24: 00000000000014e6 | |
| [ 47.498106] x23: ffffffc080c66000 x22: 0000000000000000 x21: ffffff81025c4000 | |
| [ 47.505271] x20: ffffff8100162400 x19: ffffff81025c44c0 x18: 00000000000001a8 | |
| [ 47.512435] x17: 6d20303533352074 x16: 756f2064656d6974 x15: ffffffc080c7de30 | |
| [ 47.519598] x14: 00000000000004f8 x13: 00000000000001a8 x12: 00000000ffffffea | |
| [ 47.526762] x11: 00000000ffffefff x10: ffffffc080cd5e30 x9 : ffffffc080c7ddd8 | |
| [ 47.533926] x8 : ffffffc080c69000 x7 : 0000000000000001 x6 : ffffffc080c691c0 | |
| [ 47.541090] x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000010005 | |
| [ 47.548254] x2 : 0000000000000000 x1 : 0000000000000005 x0 : 0000000000000041 | |
| [ 47.555417] Call trace: | |
| [ 47.557865] dev_watchdog+0x244/0x24c | |
| [ 47.561537] call_timer_fn.isra.0+0x24/0x80 | |
| [ 47.565735] __run_timers.part.0+0x1f0/0x254 | |
| [ 47.570019] run_timer_softirq+0x3c/0x74 | |
| [ 47.573953] handle_softirqs+0xfc/0x230 | |
| [ 47.577799] __do_softirq+0x14/0x20 | |
| [ 47.581295] ____do_softirq+0x10/0x1c | |
| [ 47.584966] call_on_irq_stack+0x24/0x4c | |
| [ 47.588899] do_softirq_own_stack+0x1c/0x2c | |
| [ 47.593094] irq_exit_rcu+0x90/0xc8 | |
| [ 47.596589] el1_interrupt+0x38/0x54 | |
| [ 47.600176] el1h_64_irq_handler+0x18/0x24 | |
| [ 47.604285] el1h_64_irq+0x68/0x6c | |
| [ 47.607694] default_idle_call+0x28/0x3c | |
| [ 47.611627] do_idle+0x1e0/0x22c | |
| [ 47.614864] cpu_startup_entry+0x34/0x3c | |
| [ 47.618797] kernel_init+0x0/0x1e0 | |
| [ 47.622206] arch_post_acpi_subsys_init+0x0/0x8 | |
| [ 47.626752] start_kernel+0x45c/0x520 | |
| [ 47.630424] __primary_switched+0xb4/0xbc | |
| [ 47.634444] ---[ end trace 0000000000000000 ]--- | |
| [ 47.639093] r8169 0000:01:00.0 eth1: ASPM disabled on Tx timeout | |
| [ 47.655966] r8169 0000:01:00.0 eth1: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100). | |
| [ 59.569989] r8169 0000:01:00.0 eth1: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100). | |
| [ 75.329972] r8169 0000:01:00.0 eth1: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100). |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment