Anucha Mai. Peelz

Create Root CA (Done once)

Create Root Key

Attention: this is the key used to sign the certificate requests, anyone holding this can sign certificates on your behalf. So keep it in a safe place!

openssl genrsa -des3 -out rootCA.key 4096

install

git clone https://github.com/tmux-plugins/tpm ~/.tmux/plugins/tpm

create file ~/.tmux.conf

# List of plugins
set -g @plugin 'tmux-plugins/tpm'
set -g @plugin 'tmux-plugins/tmux-sensible'

These are my own personal notes on how i setup a Pi Zero W as an access points it is a blatant copy of this: https://gist.github.com/tcg/0c1d32770fcf6a0acf448b7358c5d059 but is just missing a couple of things from: http://imti.co/post/145442415333/raspberry-pi-3-wifi-station-ap and like tcg, this is not intended as a guide but notes as i will invariably have to rebuild this sometime and i have broken biscuits for brains.

1. making the pi zero accesible from a computer

this is really just the same info as here https://gist.github.com/gbaman/975e2db164b3ca2b51ae11e45e8fd40a

flash raspbian lite to sd card
unplug and replug sd card adapter if necessary to see 'boot' drive
edit cmdline.txt add: modules-load=dwc2,g_ether after the word rootwait
edit config.txt and add dtoverlay=dwc2 to the end of the file
create a blank file called ssh

	include current-theme.conf

	background_opacity 0.9

	font_family MesloLGS NF
	bold_font auto
	italic_font auto
	bold_italic_font auto

	tab_bar_style powerline

	func GetEd25519PrivateFromString(i string) (ed25519.PrivateKey, error) {

	//pemBlock, rest := pem.Decode([]byte(i))
	//fmt.Println(rest)
	//fmt.Printf("%v\n", pemBlock)
	//fmt.Println(len(pemBlock.Bytes))
	//priv, err := x509.ParsePKCS8PrivateKey(pemBlock.Bytes)
	//exportKey := priv.(ed25519.PrivateKey)
	//
	//fmt.Println(priv)

	#!/usr/bin/env bash

	sudo apt update; sudo apt install build-essential libssl-dev zlib1g-dev \
	libbz2-dev libreadline-dev libsqlite3-dev curl \
	libncursesw5-dev xz-utils tk-dev libxml2-dev libxmlsec1-dev libffi-dev liblzma-dev

	curl https://pyenv.run \| bash

	echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.bashrc
	echo 'command -v pyenv >/dev/null \|\| export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.bashrc

	sudo apt install install gstreamer1.0-libav uxplay

	# allow firewall
	# mDns
	sudo ufw allow 5353

	# connection in this example ill use 35000 and uxplay need n+3 port, then i've to allow
	# 35000, 35001, 35002
	sudo ufw allow 35000:35002/tcp
	sudo ufw allow 35000:35002/udp

	%YAML 1.3
	---
	- Rule:
	- MouseGesture: Mouse Right
	- KeyPress:
	- [Super_L, Control_L, Up]
	- click
	- Rule:
	- MouseGesture: Mouse Left
	- KeyPress:

	#!/usr/bin/env bash

	basedir=$(pwd)

	projs=(
	Commands.scala
	Dependencies.scala
	LibDefs.scala
	build.properties
	plugins.sbt

	%YAML 1.3
	---
	- Rule:
	- MouseGesture: Mouse Up
	- KeyPress: [Super_L, Control_L, Down]
	- Rule:
	- MouseGesture: Mouse Down
	- KeyPress: [Super_L, Control_L, Up]
	- Rule:
	- Feature: MOUSE GESTURE