8BitDo Ultimate 2.4GHz wifi working in linux

8BitDoUltimateWifi_Linux.MD

FROM https://www.reddit.com/r/Fedora/comments/zmvkdj/8bitdo_ultimate_bluetooth_controller_working_in/

---

I've bought this new controller from 8BitDo and wished to use on linux, to my sadness the controller didn't work out of the box, neither by cable, the 2.4G dongle or bluetooth.

So I've tried a number of solutions and this one from u/GodOfEmus over in the 8bitdo community was the one to work for me:

1. Create a new file /etc/udev/rules.d/99-8bitdo-xinput.rules
2. Paste this udev rule in there, then save and exit the file:

  ACTION=="add", ATTRS{idVendor}=="2dc8", ATTRS{idProduct}=="3106", RUN+="/sbin/modprobe xpad", RUN+="/bin/sh -c 'echo 2dc8 3106 > /sys/bus/usb/drivers/xpad/new_id'"

3. Run the following command in a terminal: sudo udevadm control --reload
4. Unplug and replug the controller if it was already plugged in, it might take a second if you have the bluetooth version

It will basically "cheat" the OS to see the controller as an generic xbox device, so sadly no bluetooth nor gyro control if you care about that, but the rumbling is working for me.

Link to the original post: https://www.reddit.com/r/8bitdo/comments/ykdsmv/ultimate_24_ghz_model_right_analog_not_working_in/

And link to the comment of u/GodOfEmus with the solution: https://www.reddit.com/r/8bitdo/comments/ykdsmv/comment/iv48s4k/?utm_source=share&utm_medium=web2x&context=3

Sharing this solution here to spread the word in our community

yes, you can add multiple rules into one file.

For example, 1st party and some of the 3rd party controller are also included in steam input. You can find it on /usr/lib/udev/rules.d/60-steam-input.rules

Huh, your udev rule is for the XInput right? I don't think it's needed anymore, but it doesn't hurt to just include that anyway.

i had the controller before steam supported it and i had to add the rule.
i updated the controllers firmware and the nintendo switch mode works perfectly with Gyro but i cant make it detect gyro with the direct input mode (Power on + B). steam does detect and the additional buttons options appear but for some reason its very buggy, i turn it on and it inmeadeatly untoggles when i close it.

i had the controller before steam supported it and i had to add the rule.

it was actually the linux kernel that updated to support the XInput on this controller.

steam does detect and the additional buttons options appear but for some reason its very buggy, i turn it on and it inmeadeatly untoggles when i close it.

huh, did you try clicking the edit layout instead? and assign the button manually?
Oh, for now, to correctly display 8bitdo's additional button, you have to use steam beta

i had the controller before steam supported it and i had to add the rule.

it was actually the linux kernel that updated to support the XInput on this controller.

steam does detect and the additional buttons options appear but for some reason its very buggy, i turn it on and it inmeadeatly untoggles when i close it.

huh, did you try clicking the edit layout instead? and assign the button manually? Oh, for now, to correctly display 8bitdo's additional button, you have to use steam beta

Yes, i did that and unfortunatly the settings just keep resetting ill just wait until they iron out the bugs.