andrecurvello · June 26, 2018 03:31
diff --git a/dmesg_bbgw_debian_9_4_2018_iot.txt b/dmesg_bbgw_debian_9_4_2018_iot.txt
 [    0.000000] Booting Linux on physical CPU 0x0
 [    0.000000] Linux version 4.14.49-ti-r54 (root@b2-am57xx-beagle-x15-2gb) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PREEMPT Fri Jun 15 22:14:13 UTC 2018
 [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
 [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
 [    0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Green Wireless
 [    0.000000] Memory policy: Data cache writeback
 [    0.000000] efi: Getting EFI parameters from FDT:
 [    0.000000] efi: UEFI not found.
 [    0.000000] cma: Reserved 48 MiB at 0x9c800000
 [    0.000000] On node 0 totalpages: 130560
 [    0.000000] free_area_init_node: node 0, pgdat c15ed380, node_mem_map df961000
 [    0.000000]   Normal zone: 1148 pages used for memmap
 [    0.000000]   Normal zone: 0 pages reserved
 [    0.000000]   Normal zone: 130560 pages, LIFO batch:31
 [    0.000000] CPU: All CPU(s) started in SVC mode.
 [    0.000000] AM335X ES2.1 (sgx neon)
 [    0.000000] random: get_random_bytes called from start_kernel+0xac/0x460 with crng_init=0
 [    0.000000] percpu: Embedded 18 pages/cpu @df928000 s41548 r8192 d23988 u73728
 [    0.000000] pcpu-alloc: s41548 r8192 d23988 u73728 alloc=18*4096
 [    0.000000] pcpu-alloc: [0] 0 
 [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129412
 [    0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet cape_universal=enable
 [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
 [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
 [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
 [    0.000000] Memory: 440948K/522240K available (13312K kernel code, 1168K rwdata, 4372K rodata, 1024K init, 673K bss, 32140K reserved, 49152K cma-reserved, 0K highmem)
 [    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xe0000000 - 0xff800000   ( 504 MB)
                   lowmem  : 0xc0000000 - 0xdfe00000   ( 510 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                     .text : 0xc0008000 - 0xc0e00000   (14304 kB)
                     .init : 0xc1400000 - 0xc1500000   (1024 kB)
                     .data : 0xc1500000 - 0xc16241a8   (1169 kB)
                      .bss : 0xc162ec1c - 0xc16d709c   ( 674 kB)
 [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 [    0.000000] ftrace: allocating 42794 entries in 126 pages
 [    0.000000] Preemptible hierarchical RCU implementation.
 [    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
 [    0.000000] 	Tasks RCU enabled.
 [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
 [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
 [    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
 [    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
 [    0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
 [    0.000033] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
 [    0.000043] OMAP clocksource: timer1 at 24000000 Hz
 [    0.000759] timer_probe: no matching timers found
 [    0.000977] Console: colour dummy device 80x30
 [    0.001003] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
 [    0.001007] This ensures that you still see kernel messages. Please
 [    0.001011] update your kernel commandline.
 [    0.001035] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
 [    0.046937] pid_max: default: 32768 minimum: 301
 [    0.047210] Security Framework initialized
 [    0.047224] Yama: becoming mindful.
 [    0.047265] AppArmor: AppArmor disabled by boot time parameter
 [    0.047457] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
 [    0.047470] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
 [    0.048493] CPU: Testing write buffer coherency: ok
 [    0.048999] CPU0: thread -1, cpu 0, socket -1, mpidr 0
 [    0.063047] Setting up static identity map for 0x80100000 - 0x80100060
 [    0.070957] Hierarchical SRCU implementation.
 [    0.082088] EFI services will not be available.
 [    0.086962] smp: Bringing up secondary CPUs ...
 [    0.086976] smp: Brought up 1 node, 1 CPU
 [    0.086987] SMP: Total of 1 processors activated (995.32 BogoMIPS).
 [    0.086994] CPU: All CPU(s) started in SVC mode.
 [    0.088582] devtmpfs: initialized
 [    0.103380] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
 [    0.103868] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 [    0.103893] futex hash table entries: 256 (order: 2, 16384 bytes)
 [    0.107910] xor: measuring software checksum speed
 [    0.146997]    arm4regs  :  1217.000 MB/sec
 [    0.186934]    8regs     :  1091.000 MB/sec
 [    0.226934]    32regs    :  1088.000 MB/sec
 [    0.266933]    neon      :  1669.000 MB/sec
 [    0.266941] xor: using function: neon (1669.000 MB/sec)
 [    0.266958] pinctrl core: initialized pinctrl subsystem
 [    0.267761] DMI not present or invalid.
 [    0.268203] NET: Registered protocol family 16
 [    0.272112] DMA: preallocated 1024 KiB pool for atomic coherent allocations
 [    0.298833] omap_hwmod: debugss: _wait_target_disable failed
 [    0.351681] cpuidle: using governor menu
 [    0.357684] OMAP GPIO hardware version 0.1
 [    0.358439] GPIO line 61 (LS_BUF_EN) hogged as output/high
 [    0.360699] GPIO line 112 (MCASP0_AHCLKR) hogged as output/low
 [    0.370902] No ATAGs?
 [    0.371018] hw-breakpoint: debug architecture 0x4 unsupported.
 [    0.371389] omap4_sram_init:Unable to allocate sram needed to handle errata I688
 [    0.371400] omap4_sram_init:Unable to get sram pool needed to handle errata I688
 [    0.466986] raid6: neonx2   gen()  1883 MB/s
 [    0.534962] raid6: neonx2   xor()  1497 MB/s
 [    0.534971] raid6: using algorithm neonx2 gen() 1883 MB/s
 [    0.534977] raid6: .... xor() 1497 MB/s, rmw enabled
 [    0.534983] raid6: using neon recovery algorithm
 [    0.542332] edma 49000000.edma: TI EDMA DMA engine driver
 [    0.546033] SCSI subsystem initialized
 [    0.547114] libata version 3.00 loaded.
 [    0.547437] usbcore: registered new interface driver usbfs
 [    0.547496] usbcore: registered new interface driver hub
 [    0.547614] usbcore: registered new device driver usb
 [    0.548187] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
 [    0.549625] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
 [    0.549887] media: Linux media interface: v0.10
 [    0.549949] Linux video capture interface: v2.00
 [    0.550105] pps_core: LinuxPPS API ver. 1 registered
 [    0.550113] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
 [    0.550134] PTP clock support registered
 [    0.550258] dmi: Firmware registration failed.
 [    0.550718] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
 [    0.555245] Advanced Linux Sound Architecture Driver Initialized.
 [    0.555954] NetLabel: Initializing
 [    0.555966] NetLabel:  domain hash size = 128
 [    0.555971] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
 [    0.556067] NetLabel:  unlabeled traffic allowed by default
 [    0.559486] clocksource: Switched to clocksource timer1
 [    0.725582] VFS: Disk quotas dquot_6.6.0
 [    0.725697] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
 [    0.737763] NET: Registered protocol family 2
 [    0.738677] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
 [    0.738724] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
 [    0.738782] TCP: Hash tables configured (established 4096 bind 4096)
 [    0.738896] UDP hash table entries: 256 (order: 1, 8192 bytes)
 [    0.738918] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
 [    0.739141] NET: Registered protocol family 1
 [    0.748139] RPC: Registered named UNIX socket transport module.
 [    0.748150] RPC: Registered udp transport module.
 [    0.748155] RPC: Registered tcp transport module.
 [    0.748160] RPC: Registered tcp NFSv4.1 backchannel transport module.
 [    0.748792] Unpacking initramfs...
 [    1.019538] random: fast init done
 [    1.022861] Freeing initrd memory: 4348K
 [    1.023683] hw perfevents: no interrupt-affinity property for /pmu, guessing.
 [    1.023935] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
 [    1.025575] audit: initializing netlink subsys (disabled)
 [    1.026796] audit: type=2000 audit(1.024:1): state=initialized audit_enabled=0 res=1
 [    1.026926] workingset: timestamp_bits=14 max_order=17 bucket_order=3
 [    1.032973] zbud: loaded
 [    1.040361] NFS: Registering the id_resolver key type
 [    1.040411] Key type id_resolver registered
 [    1.040418] Key type id_legacy registered
 [    1.040437] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
 [    1.040789] fuse init (API version 7.26)
 [    1.041688] orangefs_debugfs_init: called with debug mask: :none: :0:
 [    1.041894] orangefs_init: module version upstream loaded
 [    1.041902] SGI XFS with ACLs, security attributes, realtime, no debug enabled
 [    1.052787] Key type asymmetric registered
 [    1.052803] Asymmetric key parser 'x509' registered
 [    1.052932] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
 [    1.057269] io scheduler noop registered
 [    1.057282] io scheduler deadline registered
 [    1.057670] io scheduler cfq registered (default)
 [    1.057681] io scheduler mq-deadline registered
 [    1.059263] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
 [    1.060743] gpio-of-helper ocp:cape-universal: ready
 [    1.063011] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
 [    1.064571] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
 [    1.068250] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250
 [    1.084597] console [ttyS0] enabled
 [    1.085782] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 31, base_baud = 3000000) is a 8250
 [    1.086844] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 32, base_baud = 3000000) is a 8250
 [    1.087064] serial serial0: tty port ttyS3 registered
 [    1.089232] omap_rng 48310000.rng: Random Number Generator ver. 20
 [    1.090291] [drm] Initialized vgem 1.0.0 20120112 for virtual device on minor 0
 [    1.090399] usbcore: registered new interface driver udl
 [    1.094556] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
 [    1.094874] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
 [    1.095098] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
 [    1.095318] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
 [    1.098755] libphy: Fixed MDIO Bus: probed
 [    1.099808] CAN device driver interface
 [    1.101385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 [    1.101429] ehci-platform: EHCI generic platform driver
 [    1.101609] ehci-omap: OMAP-EHCI Host Controller driver
 [    1.102084] usbcore: registered new interface driver usb-storage
 [    1.104598] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator
 [    1.107246] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator
 [    1.122362] omap_rtc 44e3e000.rtc: registered as rtc0
 [    1.123415] i2c /dev entries driver
 [    1.126185] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
 [    1.126603] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
 [    1.127834] cpuidle: enable-method property 'ti,am3352' found operations
 [    1.128328] sdhci: Secure Digital Host Controller Interface driver
 [    1.128335] sdhci: Copyright(c) Pierre Ossman
 [    1.128766] omap_hsmmc 48060000.mmc: Got CD GPIO
 [    1.203253] mmc0: host does not support reading read-only switch, assuming write-enable
 [    1.205616] mmc0: new high speed SDHC card at address 0002
 [    1.206467] mmcblk0: mmc0:0002  14.9 GiB 
 [    1.209145]  mmcblk0: p1
 [    1.257324] mmc1: new high speed MMC card at address 0001
 [    1.258223] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB 
 [    1.258627] mmcblk1boot0: mmc1:0001 Q2J54A partition 1 2.00 MiB
 [    1.259002] mmcblk1boot1: mmc1:0001 Q2J54A partition 2 2.00 MiB
 [    1.259357] mmcblk1rpmb: mmc1:0001 Q2J54A partition 3 512 KiB
 [    1.261151]  mmcblk1: p1
 [    1.327879] sdhci-pltfm: SDHCI platform and OF driver helper
 [    1.329303] ledtrig-cpu: registered to indicate activity on CPUs
 [    1.329711] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
 [    1.330095] omap-aes 53500000.aes: will run requests pump with realtime priority
 [    1.335718] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
 [    1.335933] omap_hsmmc 47810000.mmc: card claims to support voltages below defined range
 [    1.338942] hidraw: raw HID events driver (C) Jiri Kosina
 [    1.339984] usbcore: registered new interface driver usbhid
 [    1.339993] usbhid: USB HID core driver
 [    1.340536] remoteproc remoteproc0: wkup_m3 is available
 [    1.344733] wireguard: WireGuard 0.0.20180531 loaded. See www.wireguard.com for information.
 [    1.344745] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
 [    1.345760] NET: Registered protocol family 10
 [    1.350844] mmc2: new high speed SDIO card at address 0001
 [    1.352237] Segment Routing with IPv6
 [    1.352318] mip6: Mobile IPv6
 [    1.352335] NET: Registered protocol family 17
 [    1.352353] can: controller area network core (rev 20170425 abi 9)
 [    1.352460] NET: Registered protocol family 29
 [    1.352559] Key type dns_resolver registered
 [    1.352566] mpls_gso: MPLS GSO support
 [    1.352577] NET: Registered protocol family 44
 [    1.352942] omap_voltage_late_init: Voltage driver support not added
 [    1.360960] ThumbEE CPU extension supported.
 [    1.360986] Registering SWP/SWPB emulation handler
 [    1.361968] registered taskstats version 1
 [    1.362111] zswap: loaded using pool lzo/zbud
 [    1.364629] Btrfs loaded, crc32c=crc32c-generic
 [    1.364727] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
 [    1.364770] ima: Allocated hash algorithm: sha256
 [    1.409008] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
 [    1.409621] tps65217 0-0024: TPS65217 ID 0xe version 1.2
 [    1.410099] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
 [    1.410210] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
 [    1.411776] remoteproc remoteproc0: powering up wkup_m3
 [    1.411800] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168
 [    1.412052] remoteproc remoteproc0: remote processor wkup_m3 is now up
 [    1.412073] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193
 [    1.417780] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,GW1A,BBGW16054907'
 [    1.417808] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4
 [    1.444602] bone_capemgr bone_capemgr: slot #0: No cape found
 [    1.471742] bone_capemgr bone_capemgr: slot #1: No cape found
 [    1.500560] bone_capemgr bone_capemgr: slot #2: No cape found
 [    1.527698] bone_capemgr bone_capemgr: slot #3: No cape found
 [    1.527769] bone_capemgr bone_capemgr: initialized OK.
 [    1.538803] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
 [    1.538846] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
 [    1.539188] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
 [    1.539199] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 [    1.539207] usb usb1: Product: MUSB HDRC host driver
 [    1.539215] usb usb1: Manufacturer: Linux 4.14.49-ti-r54 musb-hcd
 [    1.539222] usb usb1: SerialNumber: musb-hdrc.1
 [    1.540120] hub 1-0:1.0: USB hub found
 [    1.540186] hub 1-0:1.0: 1 port detected
 [    1.543914] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
 [    1.543933] of_cfs_init
 [    1.544078] of_cfs_init: OK
 [    1.544721] wlan-en-regulator: disabling
 [    1.544739] ALSA device list:
 [    1.544745]   No soundcards found.
 [    1.549462] Freeing unused kernel memory: 1024K
 [    1.699330] random: systemd-udevd: uninitialized urandom read (16 bytes read)
 [    1.700520] random: systemd-udevd: uninitialized urandom read (16 bytes read)
 [    1.700630] random: systemd-udevd: uninitialized urandom read (16 bytes read)
 [    1.947592] usb 1-1: new high-speed USB device number 2 using musb-hdrc
 [    2.097309] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
 [    2.097328] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
 [    2.097336] usb 1-1: Product: USB2.0 Hub
 [    2.098487] hub 1-1:1.0: USB hub found
 [    2.098886] hub 1-1:1.0: 4 ports detected
 [    4.961277] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 [    5.498316] systemd[1]: System time before build time, advancing clock.
 [    5.584044] ip_tables: (C) 2000-2006 Netfilter Core Team
 [    5.628488] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
 [    5.629253] systemd[1]: Detected architecture arm.
 [    5.630791] systemd[1]: Set hostname to <beaglebone>.
 [    6.275329] systemd[1]: Listening on Journal Socket (/dev/log).
 [    6.276560] systemd[1]: Listening on Syslog Socket.
 [    6.276950] systemd[1]: Listening on udev Kernel Socket.
 [    6.277546] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
 [    6.279202] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
 [    6.280080] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
 [    6.280297] systemd[1]: Reached target Paths.
 [    6.719071] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
 [    7.602393] systemd-journald[266]: Received request to flush runtime journal from PID 1
 [   13.770900] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
 [   14.541023] random: crng init done
 [   14.541048] random: 7 urandom warning(s) missed due to ratelimiting
 [   15.175361] using random self ethernet address
 [   15.175382] using random host ethernet address
 [   15.377783] using random self ethernet address
 [   15.377804] using random host ethernet address
 [   15.908501] Mass Storage Function, version: 2009/09/11
 [   15.908526] LUN: removable file: (no medium)
 [   16.170090] usb0: HOST MAC 88:c2:55:81:47:6e
 [   16.175947] usb0: MAC 88:c2:55:81:47:6f
 [   16.190488] usb1: HOST MAC 88:c2:55:81:47:71
 [   16.192302] usb1: MAC 88:c2:55:81:47:72
 [   16.426003] configfs-gadget gadget: high-speed config #1: c
 [   16.891847] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
 [   17.085790] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready
 [   17.205119] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
 [   27.345058] Bluetooth: Core ver 2.22
 [   27.345182] NET: Registered protocol family 31
 [   27.345191] Bluetooth: HCI device and connection manager initialized
 [   27.345222] Bluetooth: HCI socket layer initialized
 [   27.345238] Bluetooth: L2CAP socket layer initialized
 [   27.345292] Bluetooth: SCO socket layer initialized
 [   27.703266] Bluetooth: HCI UART driver ver 2.3
 [   27.703288] Bluetooth: HCI UART protocol H4 registered
 [   27.703294] Bluetooth: HCI UART protocol BCSP registered
 [   27.786601] Bluetooth: HCI UART protocol LL registered
 [   27.786620] Bluetooth: HCI UART protocol ATH3K registered
 [   27.786627] Bluetooth: HCI UART protocol Three-wire (H5) registered
 [   27.786633] Bluetooth: HCI UART protocol QCA registered
 [   27.882892] Bluetooth: hci0: change remote baud rate command in firmware
 [   28.982872] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
 [   28.982889] Bluetooth: BNEP filters: protocol multicast
 [   28.982922] Bluetooth: BNEP socket layer initialized
 [   30.904741] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
 [   30.938922] wlcore: loaded
 [   31.440169] wlcore: PHY firmware version: Rev 8.2.0.0.236
 [   31.480932] wlcore: firmware booted (Rev 8.9.0.0.69)
 [   31.501187] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
 [   32.127688] Bluetooth: hci0 command 0xff05 tx timeout
 [   32.534759] wlan0: authenticate with b0:48:7a:d4:54:c2
 [   32.545015] wlan0: send auth to b0:48:7a:d4:54:c2 (try 1/3)
 [   32.574469] wlan0: authenticated
 [   32.583720] wlan0: associate with b0:48:7a:d4:54:c2 (try 1/3)
 [   32.589080] wlan0: RX AssocResp from b0:48:7a:d4:54:c2 (capab=0x431 status=0 aid=3)
 [   32.599804] wlan0: associated
 [   34.012797] IPv6: ADDRCONF(NETDEV_UP): SoftAp0: link is not ready
 [   34.949870] wlcore: down
 [   35.036597] IPv6: ADDRCONF(NETDEV_CHANGE): SoftAp0: link becomes ready
 [   35.592199] wlan0: deauthenticated from b0:48:7a:d4:54:c2 (Reason: 2=PREV_AUTH_NOT_VALID)
 [   40.159543] Bluetooth: hci0: send command failed

 [   40.165798] Bluetooth: hci0: download firmware failed, retrying...
 [   40.331622] Bluetooth: hci0: change remote baud rate command in firmware
	[ 0.000000] Booting Linux on physical CPU 0x0
	[ 0.000000] Linux version 4.14.49-ti-r54 (root@b2-am57xx-beagle-x15-2gb) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PREEMPT Fri Jun 15 22:14:13 UTC 2018
	[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
	[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
	[ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Green Wireless
	[ 0.000000] Memory policy: Data cache writeback
	[ 0.000000] efi: Getting EFI parameters from FDT:
	[ 0.000000] efi: UEFI not found.
	[ 0.000000] cma: Reserved 48 MiB at 0x9c800000
	[ 0.000000] On node 0 totalpages: 130560
	[ 0.000000] free_area_init_node: node 0, pgdat c15ed380, node_mem_map df961000
	[ 0.000000] Normal zone: 1148 pages used for memmap
	[ 0.000000] Normal zone: 0 pages reserved
	[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
	[ 0.000000] CPU: All CPU(s) started in SVC mode.
	[ 0.000000] AM335X ES2.1 (sgx neon)
	[ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x460 with crng_init=0
	[ 0.000000] percpu: Embedded 18 pages/cpu @df928000 s41548 r8192 d23988 u73728
	[ 0.000000] pcpu-alloc: s41548 r8192 d23988 u73728 alloc=18*4096
	[ 0.000000] pcpu-alloc: [0] 0
	[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412
	[ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet cape_universal=enable
	[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
	[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
	[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
	[ 0.000000] Memory: 440948K/522240K available (13312K kernel code, 1168K rwdata, 4372K rodata, 1024K init, 673K bss, 32140K reserved, 49152K cma-reserved, 0K highmem)
	[ 0.000000] Virtual kernel memory layout:
	vector : 0xffff0000 - 0xffff1000 ( 4 kB)
	fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
	vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
	lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)
	pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
	modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
	.text : 0xc0008000 - 0xc0e00000 (14304 kB)
	.init : 0xc1400000 - 0xc1500000 (1024 kB)
	.data : 0xc1500000 - 0xc16241a8 (1169 kB)
	.bss : 0xc162ec1c - 0xc16d709c ( 674 kB)
	[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
	[ 0.000000] ftrace: allocating 42794 entries in 126 pages
	[ 0.000000] Preemptible hierarchical RCU implementation.
	[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
	[ 0.000000] Tasks RCU enabled.
	[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
	[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
	[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
	[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
	[ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
	[ 0.000033] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
	[ 0.000043] OMAP clocksource: timer1 at 24000000 Hz
	[ 0.000759] timer_probe: no matching timers found
	[ 0.000977] Console: colour dummy device 80x30
	[ 0.001003] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
	[ 0.001007] This ensures that you still see kernel messages. Please
	[ 0.001011] update your kernel commandline.
	[ 0.001035] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
	[ 0.046937] pid_max: default: 32768 minimum: 301
	[ 0.047210] Security Framework initialized
	[ 0.047224] Yama: becoming mindful.
	[ 0.047265] AppArmor: AppArmor disabled by boot time parameter
	[ 0.047457] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
	[ 0.047470] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
	[ 0.048493] CPU: Testing write buffer coherency: ok
	[ 0.048999] CPU0: thread -1, cpu 0, socket -1, mpidr 0
	[ 0.063047] Setting up static identity map for 0x80100000 - 0x80100060
	[ 0.070957] Hierarchical SRCU implementation.
	[ 0.082088] EFI services will not be available.
	[ 0.086962] smp: Bringing up secondary CPUs ...
	[ 0.086976] smp: Brought up 1 node, 1 CPU
	[ 0.086987] SMP: Total of 1 processors activated (995.32 BogoMIPS).
	[ 0.086994] CPU: All CPU(s) started in SVC mode.
	[ 0.088582] devtmpfs: initialized
	[ 0.103380] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
	[ 0.103868] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
	[ 0.103893] futex hash table entries: 256 (order: 2, 16384 bytes)
	[ 0.107910] xor: measuring software checksum speed
	[ 0.146997] arm4regs : 1217.000 MB/sec
	[ 0.186934] 8regs : 1091.000 MB/sec
	[ 0.226934] 32regs : 1088.000 MB/sec
	[ 0.266933] neon : 1669.000 MB/sec
	[ 0.266941] xor: using function: neon (1669.000 MB/sec)
	[ 0.266958] pinctrl core: initialized pinctrl subsystem
	[ 0.267761] DMI not present or invalid.
	[ 0.268203] NET: Registered protocol family 16
	[ 0.272112] DMA: preallocated 1024 KiB pool for atomic coherent allocations
	[ 0.298833] omap_hwmod: debugss: _wait_target_disable failed
	[ 0.351681] cpuidle: using governor menu
	[ 0.357684] OMAP GPIO hardware version 0.1
	[ 0.358439] GPIO line 61 (LS_BUF_EN) hogged as output/high
	[ 0.360699] GPIO line 112 (MCASP0_AHCLKR) hogged as output/low
	[ 0.370902] No ATAGs?
	[ 0.371018] hw-breakpoint: debug architecture 0x4 unsupported.
	[ 0.371389] omap4_sram_init:Unable to allocate sram needed to handle errata I688
	[ 0.371400] omap4_sram_init:Unable to get sram pool needed to handle errata I688
	[ 0.466986] raid6: neonx2 gen() 1883 MB/s
	[ 0.534962] raid6: neonx2 xor() 1497 MB/s
	[ 0.534971] raid6: using algorithm neonx2 gen() 1883 MB/s
	[ 0.534977] raid6: .... xor() 1497 MB/s, rmw enabled
	[ 0.534983] raid6: using neon recovery algorithm
	[ 0.542332] edma 49000000.edma: TI EDMA DMA engine driver
	[ 0.546033] SCSI subsystem initialized
	[ 0.547114] libata version 3.00 loaded.
	[ 0.547437] usbcore: registered new interface driver usbfs
	[ 0.547496] usbcore: registered new interface driver hub
	[ 0.547614] usbcore: registered new device driver usb
	[ 0.548187] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
	[ 0.549625] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
	[ 0.549887] media: Linux media interface: v0.10
	[ 0.549949] Linux video capture interface: v2.00
	[ 0.550105] pps_core: LinuxPPS API ver. 1 registered
	[ 0.550113] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
	[ 0.550134] PTP clock support registered
	[ 0.550258] dmi: Firmware registration failed.
	[ 0.550718] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
	[ 0.555245] Advanced Linux Sound Architecture Driver Initialized.
	[ 0.555954] NetLabel: Initializing
	[ 0.555966] NetLabel: domain hash size = 128
	[ 0.555971] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
	[ 0.556067] NetLabel: unlabeled traffic allowed by default
	[ 0.559486] clocksource: Switched to clocksource timer1
	[ 0.725582] VFS: Disk quotas dquot_6.6.0
	[ 0.725697] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
	[ 0.737763] NET: Registered protocol family 2
	[ 0.738677] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
	[ 0.738724] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
	[ 0.738782] TCP: Hash tables configured (established 4096 bind 4096)
	[ 0.738896] UDP hash table entries: 256 (order: 1, 8192 bytes)
	[ 0.738918] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
	[ 0.739141] NET: Registered protocol family 1
	[ 0.748139] RPC: Registered named UNIX socket transport module.
	[ 0.748150] RPC: Registered udp transport module.
	[ 0.748155] RPC: Registered tcp transport module.
	[ 0.748160] RPC: Registered tcp NFSv4.1 backchannel transport module.
	[ 0.748792] Unpacking initramfs...
	[ 1.019538] random: fast init done
	[ 1.022861] Freeing initrd memory: 4348K
	[ 1.023683] hw perfevents: no interrupt-affinity property for /pmu, guessing.
	[ 1.023935] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
	[ 1.025575] audit: initializing netlink subsys (disabled)
	[ 1.026796] audit: type=2000 audit(1.024:1): state=initialized audit_enabled=0 res=1
	[ 1.026926] workingset: timestamp_bits=14 max_order=17 bucket_order=3
	[ 1.032973] zbud: loaded
	[ 1.040361] NFS: Registering the id_resolver key type
	[ 1.040411] Key type id_resolver registered
	[ 1.040418] Key type id_legacy registered
	[ 1.040437] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
	[ 1.040789] fuse init (API version 7.26)
	[ 1.041688] orangefs_debugfs_init: called with debug mask: :none: :0:
	[ 1.041894] orangefs_init: module version upstream loaded
	[ 1.041902] SGI XFS with ACLs, security attributes, realtime, no debug enabled
	[ 1.052787] Key type asymmetric registered
	[ 1.052803] Asymmetric key parser 'x509' registered
	[ 1.052932] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
	[ 1.057269] io scheduler noop registered
	[ 1.057282] io scheduler deadline registered
	[ 1.057670] io scheduler cfq registered (default)
	[ 1.057681] io scheduler mq-deadline registered
	[ 1.059263] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
	[ 1.060743] gpio-of-helper ocp:cape-universal: ready
	[ 1.063011] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
	[ 1.064571] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
	[ 1.068250] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250
	[ 1.084597] console [ttyS0] enabled
	[ 1.085782] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 31, base_baud = 3000000) is a 8250
	[ 1.086844] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 32, base_baud = 3000000) is a 8250
	[ 1.087064] serial serial0: tty port ttyS3 registered
	[ 1.089232] omap_rng 48310000.rng: Random Number Generator ver. 20
	[ 1.090291] [drm] Initialized vgem 1.0.0 20120112 for virtual device on minor 0
	[ 1.090399] usbcore: registered new interface driver udl
	[ 1.094556] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
	[ 1.094874] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
	[ 1.095098] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
	[ 1.095318] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
	[ 1.098755] libphy: Fixed MDIO Bus: probed
	[ 1.099808] CAN device driver interface
	[ 1.101385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
	[ 1.101429] ehci-platform: EHCI generic platform driver
	[ 1.101609] ehci-omap: OMAP-EHCI Host Controller driver
	[ 1.102084] usbcore: registered new interface driver usb-storage
	[ 1.104598] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator
	[ 1.107246] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator
	[ 1.122362] omap_rtc 44e3e000.rtc: registered as rtc0
	[ 1.123415] i2c /dev entries driver
	[ 1.126185] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
	[ 1.126603] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
	[ 1.127834] cpuidle: enable-method property 'ti,am3352' found operations
	[ 1.128328] sdhci: Secure Digital Host Controller Interface driver
	[ 1.128335] sdhci: Copyright(c) Pierre Ossman
	[ 1.128766] omap_hsmmc 48060000.mmc: Got CD GPIO
	[ 1.203253] mmc0: host does not support reading read-only switch, assuming write-enable
	[ 1.205616] mmc0: new high speed SDHC card at address 0002
	[ 1.206467] mmcblk0: mmc0:0002 14.9 GiB
	[ 1.209145] mmcblk0: p1
	[ 1.257324] mmc1: new high speed MMC card at address 0001
	[ 1.258223] mmcblk1: mmc1:0001 Q2J54A 3.64 GiB
	[ 1.258627] mmcblk1boot0: mmc1:0001 Q2J54A partition 1 2.00 MiB
	[ 1.259002] mmcblk1boot1: mmc1:0001 Q2J54A partition 2 2.00 MiB
	[ 1.259357] mmcblk1rpmb: mmc1:0001 Q2J54A partition 3 512 KiB
	[ 1.261151] mmcblk1: p1
	[ 1.327879] sdhci-pltfm: SDHCI platform and OF driver helper
	[ 1.329303] ledtrig-cpu: registered to indicate activity on CPUs
	[ 1.329711] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
	[ 1.330095] omap-aes 53500000.aes: will run requests pump with realtime priority
	[ 1.335718] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
	[ 1.335933] omap_hsmmc 47810000.mmc: card claims to support voltages below defined range
	[ 1.338942] hidraw: raw HID events driver (C) Jiri Kosina
	[ 1.339984] usbcore: registered new interface driver usbhid
	[ 1.339993] usbhid: USB HID core driver
	[ 1.340536] remoteproc remoteproc0: wkup_m3 is available
	[ 1.344733] wireguard: WireGuard 0.0.20180531 loaded. See www.wireguard.com for information.
	[ 1.344745] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
	[ 1.345760] NET: Registered protocol family 10
	[ 1.350844] mmc2: new high speed SDIO card at address 0001
	[ 1.352237] Segment Routing with IPv6
	[ 1.352318] mip6: Mobile IPv6
	[ 1.352335] NET: Registered protocol family 17
	[ 1.352353] can: controller area network core (rev 20170425 abi 9)
	[ 1.352460] NET: Registered protocol family 29
	[ 1.352559] Key type dns_resolver registered
	[ 1.352566] mpls_gso: MPLS GSO support
	[ 1.352577] NET: Registered protocol family 44
	[ 1.352942] omap_voltage_late_init: Voltage driver support not added
	[ 1.360960] ThumbEE CPU extension supported.
	[ 1.360986] Registering SWP/SWPB emulation handler
	[ 1.361968] registered taskstats version 1
	[ 1.362111] zswap: loaded using pool lzo/zbud
	[ 1.364629] Btrfs loaded, crc32c=crc32c-generic
	[ 1.364727] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
	[ 1.364770] ima: Allocated hash algorithm: sha256
	[ 1.409008] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
	[ 1.409621] tps65217 0-0024: TPS65217 ID 0xe version 1.2
	[ 1.410099] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
	[ 1.410210] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
	[ 1.411776] remoteproc remoteproc0: powering up wkup_m3
	[ 1.411800] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168
	[ 1.412052] remoteproc remoteproc0: remote processor wkup_m3 is now up
	[ 1.412073] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193
	[ 1.417780] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,GW1A,BBGW16054907'
	[ 1.417808] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4
	[ 1.444602] bone_capemgr bone_capemgr: slot #0: No cape found
	[ 1.471742] bone_capemgr bone_capemgr: slot #1: No cape found
	[ 1.500560] bone_capemgr bone_capemgr: slot #2: No cape found
	[ 1.527698] bone_capemgr bone_capemgr: slot #3: No cape found
	[ 1.527769] bone_capemgr bone_capemgr: initialized OK.
	[ 1.538803] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
	[ 1.538846] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
	[ 1.539188] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
	[ 1.539199] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
	[ 1.539207] usb usb1: Product: MUSB HDRC host driver
	[ 1.539215] usb usb1: Manufacturer: Linux 4.14.49-ti-r54 musb-hcd
	[ 1.539222] usb usb1: SerialNumber: musb-hdrc.1
	[ 1.540120] hub 1-0:1.0: USB hub found
	[ 1.540186] hub 1-0:1.0: 1 port detected
	[ 1.543914] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
	[ 1.543933] of_cfs_init
	[ 1.544078] of_cfs_init: OK
	[ 1.544721] wlan-en-regulator: disabling
	[ 1.544739] ALSA device list:
	[ 1.544745] No soundcards found.
	[ 1.549462] Freeing unused kernel memory: 1024K
	[ 1.699330] random: systemd-udevd: uninitialized urandom read (16 bytes read)
	[ 1.700520] random: systemd-udevd: uninitialized urandom read (16 bytes read)
	[ 1.700630] random: systemd-udevd: uninitialized urandom read (16 bytes read)
	[ 1.947592] usb 1-1: new high-speed USB device number 2 using musb-hdrc
	[ 2.097309] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
	[ 2.097328] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
	[ 2.097336] usb 1-1: Product: USB2.0 Hub
	[ 2.098487] hub 1-1:1.0: USB hub found
	[ 2.098886] hub 1-1:1.0: 4 ports detected
	[ 4.961277] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
	[ 5.498316] systemd[1]: System time before build time, advancing clock.
	[ 5.584044] ip_tables: (C) 2000-2006 Netfilter Core Team
	[ 5.628488] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
	[ 5.629253] systemd[1]: Detected architecture arm.
	[ 5.630791] systemd[1]: Set hostname to <beaglebone>.
	[ 6.275329] systemd[1]: Listening on Journal Socket (/dev/log).
	[ 6.276560] systemd[1]: Listening on Syslog Socket.
	[ 6.276950] systemd[1]: Listening on udev Kernel Socket.
	[ 6.277546] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
	[ 6.279202] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
	[ 6.280080] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
	[ 6.280297] systemd[1]: Reached target Paths.
	[ 6.719071] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
	[ 7.602393] systemd-journald[266]: Received request to flush runtime journal from PID 1
	[ 13.770900] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
	[ 14.541023] random: crng init done
	[ 14.541048] random: 7 urandom warning(s) missed due to ratelimiting
	[ 15.175361] using random self ethernet address
	[ 15.175382] using random host ethernet address
	[ 15.377783] using random self ethernet address
	[ 15.377804] using random host ethernet address
	[ 15.908501] Mass Storage Function, version: 2009/09/11
	[ 15.908526] LUN: removable file: (no medium)
	[ 16.170090] usb0: HOST MAC 88:c2:55:81:47:6e
	[ 16.175947] usb0: MAC 88:c2:55:81:47:6f
	[ 16.190488] usb1: HOST MAC 88:c2:55:81:47:71
	[ 16.192302] usb1: MAC 88:c2:55:81:47:72
	[ 16.426003] configfs-gadget gadget: high-speed config #1: c
	[ 16.891847] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
	[ 17.085790] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready
	[ 17.205119] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
	[ 27.345058] Bluetooth: Core ver 2.22
	[ 27.345182] NET: Registered protocol family 31
	[ 27.345191] Bluetooth: HCI device and connection manager initialized
	[ 27.345222] Bluetooth: HCI socket layer initialized
	[ 27.345238] Bluetooth: L2CAP socket layer initialized
	[ 27.345292] Bluetooth: SCO socket layer initialized
	[ 27.703266] Bluetooth: HCI UART driver ver 2.3
	[ 27.703288] Bluetooth: HCI UART protocol H4 registered
	[ 27.703294] Bluetooth: HCI UART protocol BCSP registered
	[ 27.786601] Bluetooth: HCI UART protocol LL registered
	[ 27.786620] Bluetooth: HCI UART protocol ATH3K registered
	[ 27.786627] Bluetooth: HCI UART protocol Three-wire (H5) registered
	[ 27.786633] Bluetooth: HCI UART protocol QCA registered
	[ 27.882892] Bluetooth: hci0: change remote baud rate command in firmware
	[ 28.982872] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
	[ 28.982889] Bluetooth: BNEP filters: protocol multicast
	[ 28.982922] Bluetooth: BNEP socket layer initialized
	[ 30.904741] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
	[ 30.938922] wlcore: loaded
	[ 31.440169] wlcore: PHY firmware version: Rev 8.2.0.0.236
	[ 31.480932] wlcore: firmware booted (Rev 8.9.0.0.69)
	[ 31.501187] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
	[ 32.127688] Bluetooth: hci0 command 0xff05 tx timeout
	[ 32.534759] wlan0: authenticate with b0:48:7a:d4:54:c2
	[ 32.545015] wlan0: send auth to b0:48:7a:d4:54:c2 (try 1/3)
	[ 32.574469] wlan0: authenticated
	[ 32.583720] wlan0: associate with b0:48:7a:d4:54:c2 (try 1/3)
	[ 32.589080] wlan0: RX AssocResp from b0:48:7a:d4:54:c2 (capab=0x431 status=0 aid=3)
	[ 32.599804] wlan0: associated
	[ 34.012797] IPv6: ADDRCONF(NETDEV_UP): SoftAp0: link is not ready
	[ 34.949870] wlcore: down
	[ 35.036597] IPv6: ADDRCONF(NETDEV_CHANGE): SoftAp0: link becomes ready
	[ 35.592199] wlan0: deauthenticated from b0:48:7a:d4:54:c2 (Reason: 2=PREV_AUTH_NOT_VALID)
	[ 40.159543] Bluetooth: hci0: send command failed

	[ 40.165798] Bluetooth: hci0: download firmware failed, retrying...
	[ 40.331622] Bluetooth: hci0: change remote baud rate command in firmware