- install lm-sensors with your package manager
sensors
If it won't show any fan/speed, continue
sensor-detect
Say YES to at least "Super I/O sensors"
Expected output:
Trying family `ITE'... Yes
Found unknown chip with ID 0x8688
If similar, continue
git clone https://github.com/frankcrawford/it87
cd it87
sudo make clean
sudo make install
sudo modprobe it87 ignore_resource_conflict=1 force_id=0x8622
sensors
The fans should show up now, if yes, continue to make them available at boot:
echo options it87 ignore_resource_conflict=1 force_id=0x8622 > /etc/modprobe.d/it87.conf
echo it87 >> /etc/modules
Thanks for much for this! :)
Running Debian 12, Gigabyte x570 Aorus Pro Wifi
git clone https://github.com/frankcrawford/it87
cd it87
sudo make clean
sudo make
sudo make install
---- This one didn't seem to do anything
sudo modprobe it87 ignore_resource_conflict=1 force_id=0x8622
But after I rebooted, I now have all sesnsors.
it8688-isa-0a40
Adapter: ISA adapter
in0: 1.42 V (min = +0.00 V, max = +3.06 V)
in1: 2.02 V (min = +0.00 V, max = +3.06 V)
in2: 2.02 V (min = +0.00 V, max = +3.06 V)
in3: 1.99 V (min = +0.00 V, max = +3.06 V)
in4: 1.07 V (min = +0.00 V, max = +3.06 V)
in5: 900.00 mV (min = +0.00 V, max = +3.06 V)
in6: 1.36 V (min = +0.00 V, max = +3.06 V)
3VSB: 3.26 V (min = +0.00 V, max = +6.12 V)
Vbat: 3.22 V
fan1: 620 RPM (min = 0 RPM)
fan2: 427 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
fan5: 553 RPM (min = 0 RPM)
temp1: +32.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: -55.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp3: +55.0°C (low = +127.0°C, high = +127.0°C) sensor = AMD AMDSI
temp4: +45.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp5: +41.0°C (low = +0.0°C, high = -125.0°C) sensor = thermistor
temp6: +49.0°C (low = -16.0°C, high = +90.0°C) sensor = thermistor