OpenSCAD source code: Adapter for PC4-M10 to Polymaker PolyDryer box lid

PC4 Fitting Plates.scad

// PC4 Fitting Plates for PolyDryer
// Ed Nisley - KE4ZNU
// 2025-05-02

include <BOSL2/std.scad>
include <BOSL2/threading.scad>

Layout = "Plate";         // [Plate,Gasket,DrillGuide]

/* [Hidden] */

HoleWindage = 0.2;
Protrusion = 0.1;
NumSides = 3*3*4;

Gap = 5.0;

TubeStop = 0.5;               // prevent PTFE tube from sliding through
ThreadLength = 6.0;

PlateOA = [28.0,22.0,ThreadLength + TubeStop];

ScrewOC = 20.0;

$fn=4*3*4;

//----------
// Define it

module Plate() {

  difference() {
    cuboid(PlateOA,anchor=BOTTOM,rounding=4.0,edges="Z");               // plate to fit PolyDryer
    up(TubeStop)                                                        // thread for fitting
      threaded_rod(d=9.7,l=ThreadLength + Protrusion,pitch=INCH/28,internal=true,bevel2=true,anchor=BOTTOM);
    down(Protrusion)
      for (i = [-1,1])
        right(i*ScrewOC/2)
          cylinder(4.5 + TubeStop + Protrusion,d=3.7,anchor=BOTTOM);    // M3 4×4 inserts
    down(Protrusion)
      cylinder(2*TubeStop,d=2.5,anchor=BOTTOM);                         // filament clearance
  }

}

//----------
// Build things

if (Layout == "Plate")
  Plate();

if (Layout == "Gasket")
  projection(cut=true)
    Plate();

if (Layout == "DrillGuide")
  difference() {
    projection(cut=true)
      Plate();
    circle(d=10);
  }