Synology BTRFS repair

Repair synology BTRFS volume

btrfs fi show -d
(/dev/mapper/vg1000-lv)

syno_poweroff_task -d

(or: umount /volume1)
(or2: umount /volume1 -f -k)

Check to see if all us unmounted:
df -h

mdadm --stop /dev/vg1000/lv

btrfsck /dev/vg1000/lv

btrfs check --repair /dev/vg1000/lv

btrfs rescue super-recover -v /dev/vg1000/lv

vgchange -ay

e2fsck -nvf -C 0 /dev/vg1000/lv

fsck.ext4 -pvf -C 0 /dev/vg1000/lv

(or: e2fsck -pvf -C 0 /dev/vg1000/lv -C O)
(do not do this: -C fd)

Hy Delete the 2 files of Metadata in the plex directory and try again . It should work 👍.  When its finished update the Plex Library. Am 31.05.2025 um 18:08 schrieb eduarcor ***@***.***>:Re: bruvv/Repair synology BTRFS ***@***.*** commented on this gist.Hello guys,Hope you could help with a problem I am having in my NAS.First a little bit of context. I am running an xpenology with DSM 7.2.2 (last version) in SA6400 platform (i5 12400, Asrock H610M-ITX/ac board, 32Gb DDR4) with Arc Loader 2.4.2, I have RAID 6 with 8 x 8Tb at 62% of capacity. Being running xpenology for many years with no problem, starting from a RAID 5 with 5 x 8Tb, which I had to change several times faulty drives with new ones, and reconstructing the RAID, etc... Always successfully.Now. When I try to do a manual data scrubbing, after several hours it aborts.The message in Notifications is:The system was unable to run data scrubbing on Storage Pool 1. Please go to Storage Manager and check if the volumes belonging to this storage pool are in a healthy status.But the Volume health status is healthy!! No errors whatsoever... runned smart tests (quick), healthy status. Even having 3 Ironwolfs disks, I did Ironwolf tests with no errors either, showing all of them being in healthy condition.In Notifications, a system even indicated:Files with checksum mismatch have been detected on a volume. Please go to Log Center and check the file paths of the files with errors and try to restore the files with backed up files.This happened while performing the data scrubbing, 2 files had errors: one belonging a metadata file of database inside a plex docker container. And other was an old video file.As there were no other reason why the data scrubbing aborted, I typed these commands in ssh:btrfs scrub status -d /volume1scrub status for 98dcebd8-a24e-4d16-b7d1-90917471e437scrub device /dev/mapper/cachedev_0 (id 1) historyscrub started at Wed May 28 21:02:50 2025 and was aborted after 03:50:45total bytes scrubbed: 13.32TiB with 2 errorserror details: csum=2corrected errors: 0, uncorrectable errors: 2, unverified errors: 0> btrfs scrub status -d -R /volume1 scrub status for 98dcebd8-a24e-4d16-b7d1-90917471e437 scrub device /dev/mapper/cachedev_0 (id 1) history scrub started at Wed May 28 21:02:50 2025 and was aborted after 03:50:45 data_extents_scrubbed: 223376488 tree_extents_scrubbed: 3407534 data_bytes_scrubbed: 14586949533696 tree_bytes_scrubbed: 55829037056 read_errors: 0 csum_errors: 2 verify_errors: 0 no_csum: 2449 csum_discards: 0 super_errors: 0 malloc_errors: 0 uncorrectable_errors: 2 unverified_errors: 0 corrected_errors: 0 last_physical: 15662894481408 It looks like it aborted after almost 4 hours and 13.32TiB of scrubbing (of a total of 25.8TiB used in the Volume).As per the result of the checksum errors, I ran a memtest. I have 2x16Gb DDR4 memory. It found errors. I removed one of the sticks, and kept the other, and ran memtest again. It didn't error out so I am now having just 16Gb of RAM, but allegedly with no errors.Then I removed the 2 files that were corrupted (I don't care about them), just in case it was aborting the scrubbing because of them, as a kind reddit user told me it could be the case (thanks u/wallacebrf).And I ran data scrubbing again, having exactly the same message Notifications (DSM is so bad, not showing the cause of it). Now there are no messages at all of any checksum mismatch.The result of the commands are pretty similar:btrfs scrub status -d /volume1scrub status for 98dcebd8-a24e-4d16-b7d1-90917471e437scrub device /dev/mapper/cachedev_0 (id 1) historyscrub started at Thu May 29 02:41:33 2025 and was aborted after 03:50:40total bytes scrubbed: 13.32TiB with 1 errorserror details: csum=1corrected errors: 0, uncorrectable errors: 1, unverified errors: 0> btrfs scrub status -d -R /volume1 scrub status for 98dcebd8-a24e-4d16-b7d1-90917471e437 scrub device /dev/mapper/cachedev_0 (id 1) history scrub started at Thu May 29 02:41:33 2025 and was aborted after 03:50:40 data_extents_scrubbed: 223374923 tree_extents_scrubbed: 3407378 data_bytes_scrubbed: 14586854449152 tree_bytes_scrubbed: 55826481152 read_errors: 0 csum_errors: 1 verify_errors: 0 no_csum: 2449 csum_discards: 0 super_errors: 0 malloc_errors: 0 uncorrectable_errors: 1 unverified_errors: 0 corrected_errors: 0 last_physical: 15662894481408 Before it ran during 3:50:45, and now 3:50:40, which is quite similar, almost 4 hours.Now it says 1 error, despite I deleted the 2 files and is not informing about any file checksum error now in the Notifications nor the Log Center.I have no clue why is aborting. I guess the data scrubbing process should finish the whole volume and inform of any file with any problem if it is the case.I am very concern as in the case of a hard drive failure, the process of reconstructing of the RAID 6 (I have 2 drives tolerance), does a data scrubbing and if I am not able to run the scrubbing, then I will loose the data.Is curious, but the system is working flawlessly otherwise. I was not having any problem, except this data scrubbing not working right now.I will have to leave my home until next week, and will not be able to perform more test in a week. But just wanted to share this asap and try to make this thing work again, as I am a freaking out to be honest.Thanks guys in advance.—Reply to this email directly, view it on GitHub or unsubscribe.You are receiving this email because you commented on the thread.Triage notifications on the go with GitHub Mobile for iOS or Android.                                                           

Hy Delete the 2 files of Metadata in the plex directory and try again . It should work 👍.  When its finished update the Plex Library.

Jeez, replying to my message via email, made your response pretty bad to read in the thread. Please read and reply in gist instead. Doing from the mail, does not work properly.
Coming back to your response, I think you haven’t read my post properly. See what I wrote:

Then I removed the 2 files that were corrupted (I don't care about them), just in case it was aborting the scrubbing because of them, as a kind reddit user told me it could be the case.

As you can see, I already did and didn’t work as when I repeated the scrubbing it failed the same way…

@eduarcor do you have snapshots enabled on those two files? Might be that the snapshots are interfering?

I don’t have any snapshot. I am not using snapshots

Tried again:

> btrfs scrub status -d /volume1
scrub status for 98dcebd8-a24e-4d16-b7d1-90917471e437
scrub device /dev/mapper/cachedev_0 (id 1) history
scrub started at Tue Jun 10 23:36:50 2025 and was aborted after 03:57:18
total bytes scrubbed: 13.32TiB with 1 errors
error details: csum=1
corrected errors: 0, uncorrectable errors: 1, unverified errors: 0

> btrfs scrub status -d -R /volume1
scrub status for 98dcebd8-a24e-4d16-b7d1-90917471e437
scrub device /dev/mapper/cachedev_0 (id 1) history
scrub started at Tue Jun 10 23:36:50 2025 and was aborted after 03:57:18
data_extents_scrubbed: 223444115
tree_extents_scrubbed: 3395356
data_bytes_scrubbed: 14590691647488
tree_bytes_scrubbed: 55629512704
read_errors: 0
csum_errors: 1
verify_errors: 0
no_csum: 2450
csum_discards: 0
super_errors: 0
malloc_errors: 0
uncorrectable_errors: 1
unverified_errors: 0
corrected_errors: 0
last_physical: 15662894481408

And again,

> btrfs scrub status -d /volume1
scrub status for 98dcebd8-a24e-4d16-b7d1-90917471e437
scrub device /dev/mapper/cachedev_0 (id 1) history
scrub started at Wed Jun 11 03:56:46 2025 and was aborted after 03:40:22
total bytes scrubbed: 13.32TiB with 1 errors
error details: csum=1
corrected errors: 0, uncorrectable errors: 1, unverified errors: 0

> btrfs scrub status -d -R /volume1
scrub status for 98dcebd8-a24e-4d16-b7d1-90917471e437
scrub device /dev/mapper/cachedev_0 (id 1) history
scrub started at Wed Jun 11 03:56:46 2025 and was aborted after 03:40:22
data_extents_scrubbed: 223443880
tree_extents_scrubbed: 3395228
data_bytes_scrubbed: 14590688092160
tree_bytes_scrubbed: 55627415552
read_errors: 0
csum_errors: 1
verify_errors: 0
no_csum: 2450
csum_discards: 0
super_errors: 0
malloc_errors: 0
uncorrectable_errors: 1
unverified_errors: 0
corrected_errors: 0
last_physical: 15662894481408

Sadly, same thing. No logs in the log center. No info. No help. Nothing.