This shows both the Live and PTR. Even though ROC and TFT are listed separately, they both link the same installer.
https://us.battle.net/account/management/download/?show=classic
With lutris:
| m68k-none-elf-as -g main.s -o main.o | |
| m68k-none-elf-ld -T main.lds main.o -o main.elf | |
| m68k-none-elf-objcopy -O binary main.elf main.bin |
| arm-none-eabi-as game.s -o game.o | |
| arm-none-eabi-ld -T game.lds game.o -o game.elf | |
| arm-none-eabi-objcopy -O binary game.elf game.gba |
This shows both the Live and PTR. Even though ROC and TFT are listed separately, they both link the same installer.
https://us.battle.net/account/management/download/?show=classic
With lutris:
| [626279.540555] XFS: Internal error XFS_WANT_CORRUPTED_GOTO at line 988 of file /build/buildd/linux-3.2.0/fs/xfs/xfs_ialloc.c. Caller 0xffffffffa01a8cc1 | |
| [626279.540558] | |
| [626279.540675] Pid: 43087, comm: rsync Not tainted 3.2.0-75-generic #110-Ubuntu | |
| [626279.540678] Call Trace: | |
| [626279.540709] [<ffffffffa01666bf>] xfs_error_report+0x3f/0x50 [xfs] | |
| [626279.540732] [<ffffffffa01a8cc1>] ? xfs_ialloc+0x61/0x650 [xfs] | |
| [626279.540752] [<ffffffffa01a7777>] xfs_dialloc+0x867/0x910 [xfs] | |
| [626279.540772] [<ffffffffa01a8cc1>] xfs_ialloc+0x61/0x650 [xfs] | |
| [626279.540790] [<ffffffffa017a837>] ? kmem_zone_alloc+0x67/0xe0 [xfs] | |
| [626279.540812] [<ffffffffa01b9328>] ? xlog_grant_log_space+0x168/0x1c0 [xfs] |
| #empty |
| localhost ~ # cat <<EOF> /etc/wpa_supplicant.conf | |
| ctrl_interface=DIR=/run/wpa_supplicant GROUP=wheel | |
| update_config=1 | |
| EOF | |
| localhost ~ # wpa_supplicant -iwlp1s0 -Dnl80211 -c/etc/wpa_supplicant.conf -B | |
| Successfully initialized wpa_supplicant | |
| localhost ~ # wpa_cli | |
| wpa_cli v2.0 | |
| Copyright (c) 2004-2012, Jouni Malinen <[email protected]> and contributors |
| [Unit] | |
| Description=Wireless Static IP Connectivity | |
| Wants=network.target | |
| Before=network.target | |
| BindsTo=sys-subsystem-net-devices-eth0.device | |
| After=sys-subsystem-net-devices-eth0.device | |
| [Service] | |
| Type=oneshot | |
| RemainAfterExit=yes |
| # Gist is stupid and doesn't seem to allow manual selection of syntax highlighting; .sh extension is used for increased readability. | |
| # This is only a guide to show the required steps for successful UEFI + GRUB2 installation | |
| # Many of the choices are examples or assumptions; don't blindly type shit into your machine | |
| # until/unless you at least read the comments around each command | |
| # | |
| # These steps assume you've booted in UEFI mode by preparing your USB stick per these instructions: | |
| # https://wiki.archlinux.org/index.php/UEFI#Archiso | |
| # | |
| # If you're using an actual CD burned from the official Arch ISO, just make sure you've booted it in UEFI mode |