Intel e1000e fix - Proxmox

fix.md

Fix Intel e1000e error

Please note - you may want to validate whether the options used affect your setup.

Create a new service file.

nano /etc/systemd/system/disable-offloading.service

Paste the required information/command in the newly created service file - please change eth0 to your desired adapter.

[Unit]
Description=Disable NIC offloading
After=network.target

[Service]
Type=oneshot
ExecStart=/sbin/ethtool -K eth0 gso off gro off tso off tx off rx off rxvlan off txvlan off sg off
RemainAfterExit=true

[Install]
WantedBy=multi-user.target

Load the new service file and enable on reboot.

systemctl daemon-reexec && systemctl daemon-reload && systemctl enable disable-offloading.service

As the author of the Proxmox Helper Script ... I am still up and running on my Intel NUC

root@pve:~# pveversion
pve-manager/8.4.5/57892e8e686cb35b (running kernel: 6.8.12-12-pve)
root@pve:~# uptime
 22:26:50 up 3 days,  7:56,  1 user,  load average: 0.23, 0.24, 0.11

If anyone find any nuances that need to be added ... then please reply here and I can update the Helper Script ... but so far not one issue on my setup.

I did find I had to the run the post install Helper Script again as I was getting the nag screen.

As the author of the Proxmox Helper Script ... I am still up and running on my Intel NUC

root@pve:~# pveversion
pve-manager/8.4.5/57892e8e686cb35b (running kernel: 6.8.12-12-pve)
root@pve:~# uptime
 22:26:50 up 3 days,  7:56,  1 user,  load average: 0.23, 0.24, 0.11

If anyone find any nuances that need to be added ... then please reply here and I can update the Helper Script ... but so far not one issue on my setup.

I did find I had to the run the post install Helper Script again as I was getting the nag screen.

Same on the NAG screen. The issue has not (yet) popped up after upgrading to 8.4.5 as shown in my previous post.

Thanks a lot for this post. It made a huge difference. Solved an issue with Proxmox 8.5.x on an old-ish server.