Skip to content

Instantly share code, notes, and snippets.

View czer0's full-sized avatar

Clinton MacKinnon czer0

0 followers · 5 following
View GitHub Profile
@ChipCE
ChipCE / readme.md
Last active March 28, 2025 18:09
Klipper bed mesh on print area only macro install guide

READ THIS FIRST

Adaptive bed mesh is merged into klipper master branch. You can use this feature without this custom macro. Official klipper adaptive bed mesh

Klipper mesh on print area only install guide

What this macro do

  • This macro will dynamically changing the bed mesh area based on the size of the parts will be printed. The fw will only probe on the area that the part will be printed (plus mesh_area_offset value)
@azhang
azhang / pxe_on_opnsense.md
Last active April 15, 2025 08:47
PXE on OPNsense

This is a walkthrough of setting up a PXE server to boot Ubuntu server live install .iso over network, all on an OPNsense device. No need for Dnsmasq or http/nfs server! Should be compatible with vanilla FreeBSD and HardenedBSD devices as well.

Guide made with OPNsense 20.7 and Ubuntu 20.04.2, with the assumption that your OPNsense device is at 192.168.1.1.

Thanks to all the other guides out there. 1 2

Notes:

A couple issues I ran into with other guides is that Ubuntu's servers return 404 for older releases. Make sure to check each link used in this guide to make sure they exist! This guide works with BIOS as we use pxelinux.0 but it can be adapted fairly easily for UEFI boot.

Overview:

@lenne0815
lenne0815 / klipper.cfg
Last active March 1, 2024 20:37
Ender 5 SKR mini E3 1.2 Config
# This file contains common pin mappings for the BIGTREETECH SKR mini
# E3 v1.2. To use this config, the firmware should be compiled for the
# STM32F103 with a "28KiB bootloader". Also, select "Enable extra
# low-level configuration options" and configure "GPIO pins to set at
# micro-controller startup" to "!PC13".
# The "make flash" command does not work on the SKR mini E3. Instead,
# after running "make", copy the generated "out/klipper.bin" file to a
# file named "firmware.bin" on an SD card and then restart the SKR
# mini E3 with that SD card.
@judero01col
judero01col / Service KMS
Last active April 28, 2025 05:41
Volume License Activation Key Service - KMS
## Find Available Target Editions
DISM.exe /Online /Get-TargetEditions
## Convert Server Standard 2019 Evaluation to Server Standard 2019
DISM /online /Set-Edition:ServerStandard /ProductKey:N69G4-B89J2-4G8F4-WWYCC-J464C /AcceptEula
## How To Activate
slmgr /ipk XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
slmgr /skms [server]:[port]
slmgr /ato
@codeniko
codeniko / UNMS-Unifi-Pi-Buster.md
Last active June 22, 2023 02:23
Setup UNMS and Unifi network controller on Raspberry pi 4 Raspbian buster

Setup Raspbian Buster

I'm using debian 10 as my daily so these are *nix commands. Mac should work with these too but you're on your own if you're using Windows. Goal for me is to make a headless raspberry pi I can SSH into and connect to my network using Ethernet. You should be comfortable in command line if you choose to follow this guide.

  1. Go to https://www.raspberrypi.org/downloads/raspbian and download Raspbian lite archive
  2. unzip the image
  3. Plug in sdcard. Run lsblk to see drives and mount points. Likely, the sdcard will show up in /dev/sda or /dev/sdb and may have some partitions like /dev/sda1 and /dev/sda2.
  4. If partitions are mounted, unmount all of them. Ex: umount /dev/sda1 and umount /dev/sda2
  5. Copy the raspbian image to the sdcard with sudo dd if=RASPBIAN_IMAGE_FILE.img of=/dev/sda bs=4M
  6. Run sync to ensure the written contents are flushed
  7. OPTIONAL: To start ssh server on boot, Unplug sdcard and reinsert to remount new partitions. You'll have two with raspbian.
@denizssch
denizssch / XpSerials.txt
Created July 21, 2019 00:13
Windows XP ALL Serial Keys :) (For testing purpose [Ex: VM or PenTest])
FCKGW-RHQQ2-YXRKT-8TG6W-2B7Q8
Windows XP PRO Corporate serial number S/N: Key: MQPWW-PGVKX-YPMKG-8DH3G-KC8PW
windows xp home edition serial number S/N: 034634-262024-171505-828316-729010-413531-800424-400442
Windows XP 64 serial number S/N: B2RBK-7KPT9-4JP6X-QQFWM-PJD6G
Windows XP serial number S/N: K6C2K-KY62K-DQR84-RD4QV-QB74Q
Windows XP Professional 64-bit Corporate Edition 5.2.3790.1830 serial number S/N: VCFQD-V9FX9-46WVH-K3CD4-4J3JM
Microsoft Windows XP Professional SP2 serial number S/N: YY8F2-3CKVQ-RKTRG-6JMDR-9DTG6
Windows XP Professional Service Pack 1 sp1 serial number S/N: F46YY - 2R8VQ - R8GMY - 926VK - 6BQ73
Windows XP Pro serial number S/N: KBWR7-76BD8-J7MDQ-KKG&C-V9Q2J
@shortthirdman
shortthirdman / oneclick-office-activation.cmd
Created January 25, 2019 13:25
One-Click Microsoft Office 2010, 2013 and 2016 Activation
@echo off
title Activate Microsoft Office 2016 ALL versions for FREE!&cls&echo ============================================================================&echo #Project: Activating Microsoft software products for FREE without software&echo ============================================================================&echo.&echo #Supported products:&echo - Microsoft Office Standard 2016&echo - Microsoft Office Professional Plus 2016&echo.&echo.&(if exist "%ProgramFiles%\Microsoft Office\Office16\ospp.vbs" cd /d "%ProgramFiles%\Microsoft Office\Office16")&(if exist "%ProgramFiles(x86)%\Microsoft Office\Office16\ospp.vbs" cd /d "%ProgramFiles(x86)%\Microsoft Office\Office16")&(for /f %%x in ('dir /b ..\root\Licenses16\proplusvl_kms*.xrm-ms') do cscript ospp.vbs /inslic:"..\root\Licenses16\%%x" >nul)&(for /f %%x in ('dir /b ..\root\Licenses16\proplusvl_mak*.xrm-ms') do cscript ospp.vbs /inslic:"..\root\Licenses16\%%x" >nul)&echo.&echo ============================================================================&ech
@bistory
bistory / Klipper Anycubic i3 Mega
Last active April 24, 2025 07:55
Anycubic i3 Mega configuration for Klipper (with TMC2209 + SPI, BMG extruder with stock motor, pressure advance and BLTouch clone)
# This file contains pin mappings for the Anycubic i3 Mega with
# Ultrabase from 2017. (This config may work on an Anycubic i3 Mega v1
# prior to the Ultrabase if you comment out the definition of the
# endstop_pin in the stepper_z1 section.) To use this config, the
# firmware should be compiled for the AVR atmega2560.
# See the example.cfg file for a description of available parameters.
[stepper_x]
step_pin: PF0
@tavinus
tavinus / acme-proxmox-dynu.md
Last active March 18, 2025 20:49
Using acme.sh on the proxmox host (with Dynu DNS)

Proxmox + acme.sh

Using acme.sh on the proxmox host to generate Letsencrypt certificates

With this we show how to use acme.sh instead of the original Letsencrypt interface.

Acme.sh is just a Bash script that can run on pretty much any *nix environment.
It is quite simple but also quite powerfull.

In this guide I will use the cheap and good Dynu service to configure a domain.

@KrustyHack
KrustyHack / wgk.txt
Last active April 26, 2025 04:31
Windows Generic Keys
Windows Edition Product Key
Windows 7 Starter 7Q28W-FT9PC-CMMYT-WHMY2-89M6G
Windows 7 Home Basic YGFVB-QTFXQ-3H233-PTWTJ-YRYRV
Windows 7 Home Premium RHPQ2-RMFJH-74XYM-BH4JX-XM76F
Windows 7 Professional HYF8J-CVRMY-CM74G-RPHKF-PW487
Windows 7 Ultimate D4F6K-QK3RD-TMVMJ-BBMRX-3MBMV
Windows 7 Enterprise H7X92-3VPBB-Q799D-Y6JJ3-86WC6
Windows 7 Starter N D4C3G-38HGY-HGQCV-QCWR8-97FFR
Windows 7 Home Basic N MD83G-H98CG-DXPYQ-Q8GCR-HM8X2