Run VNC without connected monitor to ubuntu Desktop

ubuntu-vnc-without-monitor.md

Install Video Dummy Package

sudo apt-get install xserver-xorg-video-dummy

Create Default X Windows Configuration File

Create / Edit xorg.conf file Rename file if already exists for backup

sudo vi /usr/share/X11/xorg.conf.d/xorg.conf

Add the following content to the file Set the resolution to what you like (whatever resolution the screen is that is used to connect remotely is probably is a good idea)

Section "Device"
    Identifier  "Configured Video Device"
    Driver      "dummy"
EndSection

Section "Monitor"
    Identifier  "Configured Monitor"
    HorizSync 31.5-48.5
    VertRefresh 50-70
EndSection

Section "Screen"
    Identifier  "Default Screen"
    Monitor     "Configured Monitor"
    Device      "Configured Video Device"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
EndSection

Save the file Reboot and Test

This works for me on Ubuntu 22.04:

​When HDMI is plugged in, the monitor works.
​When HDMI is unplugged, the dummy display driver takes over.

• Step 1

apt install xserver-xorg-video-dummy
vim /etc/X11/xorg.conf.d/10-headless.conf

10-headless.conf's content:

Section "Monitor"
    Identifier  "VirtualMonitor"
    HorizSync   30.0-62.0
    VertRefresh 50.0-70.0
    Modeline "1920x1080" 172.80 1920 2040 2248 2576 1080 1081 1084 1118
EndSection

Section "Device"
    Identifier  "VirtualCard"
    Driver      "dummy"
    VideoRam    256000
EndSection

Section "Screen"
    Identifier  "VirtualScreen"
    Device      "VirtualCard"
    Monitor     "VirtualMonitor"
    DefaultDepth 24
    SubSection "Display"
        Depth   24
        Modes   "1920x1080"
    EndSubSection
EndSection

• Step 2:

vim /etc/systemd/system/vnc-display.service

vnc-display.service's content:

[Unit]
Description=Configure VNC dummy screen
After=systemd-user-sessions.service

[Service]
ExecStart=/usr/local/bin/vnc-display.sh

[Install]
WantedBy=multi-user.target

vim /usr/local/bin/vnc-display.sh

vnc-display.sh's content:

#!/bin/bash
# Check connected displays
HDMI_STATUS=`cat /sys/class/drm/card1-HDMI-A-1/status`
if [ $HDMI_STATUS = "connected" ]
then
  # If yes, disable the dummy driver configuration by renaming the file
  sudo mv /etc/X11/xorg.conf.d/10-headless.conf /etc/X11/xorg.conf.d/10-headless.conf.bak
else
  # If no, enable the dummy driver configuration by restoring the file
  sudo mv /etc/X11/xorg.conf.d/10-headless.conf.bak /etc/X11/xorg.conf.d/10-headless.conf
  sudo X :0 -config /etc/X11/xorg.conf.d/10-headless.conf &
fi

sudo chmod +x /usr/local/bin/vnc-display.sh
systemctl daemon-reload
systemctl enable vnc-display.service

Thanks @Human0722! I was having headaches for days and almost bought a dummy HDMI plug on Aliexpress until I came across this thread!
So, it still works like a charm on the latest version of Ubuntu 25.04.