Kernel log from BBE Industrial

gistfile1.txt

$ dmesg -w
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.19.25-ti-r16 (voodoo@w2-imx6q-wandboard-2gb) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1stretch SMP PREEMPT Wed Mar 20 04:26:42 UTC 2019
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black
[    0.000000] Memory policy: Data cache writeback
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 48 MiB at 0xbc800000
[    0.000000] On node 0 totalpages: 261632
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:63
[    0.000000]   HighMem zone: 65024 pages, LIFO batch:15
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon)
[    0.000000] random: get_random_bytes called from start_kernel+0xa0/0x510 with crng_init=0
[    0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s43084 r8192 d22452 u73728
[    0.000000] pcpu-alloc: s43084 r8192 d22452 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 259904
[    0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 961596K/1046528K available (13312K kernel code, 1152K rwdata, 4420K rodata, 1024K init, 355K bss, 35780K reserved, 49152K cma-reserved, 210944K highmem)
[    0.000000] Virtual kernel memory layout:
                   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                   vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
                   lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
                   pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
                   modules : 0xbf000000 - 0xbfe00000   (  14 MB)
                     .text : 0x(ptrval) - 0x(ptrval)   (14304 kB)
                     .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
                     .data : 0x(ptrval) - 0x(ptrval)   (1153 kB)
                      .bss : 0x(ptrval) - 0x(ptrval)   ( 356 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 42322 entries in 125 pages
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000035] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000044] OMAP clocksource: timer1 at 24000000 Hz
[    0.000779] timer_probe: no matching timers found
[    0.001014] Console: colour dummy device 80x30
[    0.001040] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.001045] This ensures that you still see kernel messages. Please
[    0.001049] update your kernel commandline.
[    0.001111] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
[    0.046802] pid_max: default: 32768 minimum: 301
[    0.047110] Security Framework initialized
[    0.047123] Yama: becoming mindful.
[    0.047283] AppArmor: AppArmor initialized
[    0.047403] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.047420] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.048552] CPU: Testing write buffer coherency: ok
[    0.048622] CPU0: Spectre v2: using BPIALL workaround
[    0.049122] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.070917] Setting up static identity map for 0x80100000 - 0x80100060
[    0.078826] rcu: Hierarchical SRCU implementation.
[    0.090065] EFI services will not be available.
[    0.094833] smp: Bringing up secondary CPUs ...
[    0.094848] smp: Brought up 1 node, 1 CPU
[    0.094859] SMP: Total of 1 processors activated (995.32 BogoMIPS).
[    0.094866] CPU: All CPU(s) started in SVC mode.
[    0.096674] devtmpfs: initialized
[    0.111174] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.111844] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.111871] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.115897] xor: measuring software checksum speed
[    0.154810]    arm4regs  :  1217.000 MB/sec
[    0.194800]    8regs     :  1091.000 MB/sec
[    0.234798]    32regs    :  1088.000 MB/sec
[    0.274798]    neon      :  1668.000 MB/sec
[    0.274806] xor: using function: neon (1668.000 MB/sec)
[    0.274821] pinctrl core: initialized pinctrl subsystem
[    0.276255] NET: Registered protocol family 16
[    0.282402] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.318161] l4_wkup_cm:clk:0010:0: failed to disable
[    0.358322] audit: initializing netlink subsys (disabled)
[    0.359718] cpuidle: using governor menu
[    0.362935] audit: type=2000 audit(0.352:1): state=initialized audit_enabled=0 res=1
[    0.367952] OMAP GPIO hardware version 0.1
[    0.381868] No ATAGs?
[    0.381888] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.382465] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[    0.382477] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[    0.410989] raid6: using algorithm neonx8 gen() 0 MB/s
[    0.411002] raid6: .... xor() 0 MB/s, rmw enabled
[    0.411009] raid6: using neon recovery algorithm
[    0.418742] edma 49000000.edma: TI EDMA DMA engine driver
[    0.422374] SCSI subsystem initialized
[    0.426945] libata version 3.00 loaded.
[    0.427260] usbcore: registered new interface driver usbfs
[    0.427322] usbcore: registered new interface driver hub
[    0.427441] usbcore: registered new device driver usb
[    0.429728] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[    0.430004] media: Linux media interface: v0.10
[    0.430056] videodev: Linux video capture interface: v2.00
[    0.430220] pps_core: LinuxPPS API ver. 1 registered
[    0.430227] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.430250] PTP clock support registered
[    0.431001] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    0.435198] Advanced Linux Sound Architecture Driver Initialized.
[    0.436042] NetLabel: Initializing
[    0.436053] NetLabel:  domain hash size = 128
[    0.436058] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.436158] NetLabel:  unlabeled traffic allowed by default
[    0.437234] clocksource: Switched to clocksource timer1
[    0.597950] VFS: Disk quotas dquot_6.6.0
[    0.598070] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.598963] AppArmor: AppArmor Filesystem Enabled
[    0.611642] NET: Registered protocol family 2
[    0.612674] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    0.612710] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.612783] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.612890] TCP: Hash tables configured (established 8192 bind 8192)
[    0.613049] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.613084] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.613641] NET: Registered protocol family 1
[    0.626872] RPC: Registered named UNIX socket transport module.
[    0.626882] RPC: Registered udp transport module.
[    0.626888] RPC: Registered tcp transport module.
[    0.626892] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.627573] Unpacking initramfs...
[    0.805898] Freeing initrd memory: 3044K
[    0.806688] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[    0.809622] Initialise system trusted keyrings
[    0.810043] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.817835] zbud: loaded
[    0.825440] NFS: Registering the id_resolver key type
[    0.825483] Key type id_resolver registered
[    0.825489] Key type id_legacy registered
[    0.825507] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.825868] fuse init (API version 7.27)
[    0.836826] Key type asymmetric registered
[    0.836841] Asymmetric key parser 'x509' registered
[    0.836934] bounce: pool size: 64 pages
[    0.837031] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.841717] io scheduler noop registered
[    0.841729] io scheduler deadline registered
[    0.842047] io scheduler cfq registered (default)
[    0.842058] io scheduler mq-deadline registered
[    0.844551] pinctrl-single 44e10800.pinmux: 142 pins, size 568
[    0.846188] gpio-of-helper ocp:cape-universal: ready
[    0.849671] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[    0.851509] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    0.855168] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250
[    0.872125] console [ttyS0] enabled
[    0.874908] omap_rng 48310000.rng: Random Number Generator ver. 20
[    0.918340] random: fast init done
[    0.994112] libphy: Fixed MDIO Bus: probed
[    1.049349] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000
[    1.049365] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    1.049787] MDIO: davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[    1.064789] libphy: 4a101000.mdio: probed
[    1.064817] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver Atheros 8035 ethernet
[    1.066073] cpsw 4a100000.ethernet: Detected MACID = 44:ea:d8:aa:05:b4
[    1.066227] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[    1.066236] cpsw 4a100000.ethernet: ALE Table size 1024
[    1.066276] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies)
[    1.069067] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.069134] ehci-platform: EHCI generic platform driver
[    1.069653] ehci-omap: OMAP-EHCI Host Controller driver
[    1.070274] usbcore: registered new interface driver usb-storage
[    1.072913] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator
[    1.073098] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0
[    1.076141] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator
[    1.076296] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0
[    1.079942] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[    1.079985] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[    1.080340] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    1.080352] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.080360] usb usb1: Product: MUSB HDRC host driver
[    1.080368] usb usb1: Manufacturer: Linux 4.19.25-ti-r16 musb-hcd
[    1.080375] usb usb1: SerialNumber: musb-hdrc.1
[    1.081412] hub 1-0:1.0: USB hub found
[    1.081480] hub 1-0:1.0: 1 port detected
[    1.093139] omap_rtc 44e3e000.rtc: already running
[    1.093966] omap_rtc 44e3e000.rtc: registered as rtc0
[    1.095269] i2c /dev entries driver
[    1.095955] Driver for 1-wire Dallas network protocol.
[    1.098339] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    1.098832] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[    1.100222] cpuidle: enable-method property 'ti,am3352' found operations
[    1.100808] sdhci: Secure Digital Host Controller Interface driver
[    1.100815] sdhci: Copyright(c) Pierre Ossman
[    1.101437] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)
[    1.101449] omap_hsmmc 48060000.mmc: Got CD GPIO
[    1.102079] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1
[    1.127857] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1
[    1.153895] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.155442] ledtrig-cpu: registered to indicate activity on CPUs
[    1.155879] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    1.156252] omap-aes 53500000.aes: will run requests pump with realtime priority
[    1.158725] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    1.163068] hidraw: raw HID events driver (C) Jiri Kosina
[    1.163735] usbcore: registered new interface driver usbhid
[    1.163742] usbhid: USB HID core driver
[    1.164632] remoteproc remoteproc0: wkup_m3 is available
[    1.168730] gnss: GNSS driver registered with major 239
[    1.174748] wireguard: WireGuard 0.0.20190227 loaded. See www.wireguard.com for information.
[    1.174761] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
[    1.176172] NET: Registered protocol family 10
[    1.185696] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.188882] mmc0: new high speed SDHC card at address aaaa
[    1.198455] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[    1.204010] mmc1: new high speed MMC card at address 0001
[    1.212329]  mmcblk0: p1 p2 p3 p4 < p5 >
[    1.213588] mmcblk1: mmc1:0001 Q2J54A 3.59 GiB
[    1.214238] mmcblk1boot0: mmc1:0001 Q2J54A partition 1 16.0 MiB
[    1.214850] mmcblk1boot1: mmc1:0001 Q2J54A partition 2 16.0 MiB
[    1.217584] mmcblk1rpmb: mmc1:0001 Q2J54A partition 3 512 KiB, chardev (242:0)
[    1.222924]  mmcblk1: p1
[    1.238159] Segment Routing with IPv6
[    1.238318] mip6: Mobile IPv6
[    1.238340] NET: Registered protocol family 17
[    1.238469] Key type dns_resolver registered
[    1.238476] mpls_gso: MPLS GSO support
[    1.238749] ThumbEE CPU extension supported.
[    1.238779] Registering SWP/SWPB emulation handler
[    1.238790] omap_voltage_late_init: Voltage driver support not added
[    1.246036] PM: Cannot get wkup_m3_ipc handle
[    1.251803] registered taskstats version 1
[    1.251812] Loading compiled-in X.509 certificates
[    1.251956] zswap: loaded using pool lzo/zbud
[    1.255882] Btrfs loaded, crc32c=crc32c-generic
[    1.256002] AppArmor: AppArmor sha1 policy hashing enabled
[    1.420097] tda998x 0-0070: found TDA19988
[    1.423752] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)
[    1.423778] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.423783] [drm] No driver support for vblank timestamp query.
[    1.424328] [drm] Cannot find any crtc or sizes
[    1.425202] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0
[    1.439717] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set
[    1.440559] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
[    1.441153] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[    1.442161] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[    1.442273] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    1.444073] remoteproc remoteproc0: powering up wkup_m3
[    1.444196] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168
[    1.447608] remoteproc remoteproc0: remote processor wkup_m3 is now up
[    1.447626] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193
[    1.447974] cpu cpu0: Linked as a consumer to regulator.3
[    1.448079] cpu cpu0: Dropping the link to regulator.3
[    1.448600] cpu cpu0: Linked as a consumer to regulator.3
[    1.451709] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok
[    1.453589] PM: bootloader does not support rtc-only!
[    1.454657] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:22:04 UTC (946686124)
[    1.455448] ALSA device list:
[    1.455458]   #0: TI BeagleBone Black
[    1.462666] Freeing unused kernel memory: 1024K
[    1.463395] Run /init as init process
[    1.489474] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[    1.547937] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.548844] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.548960] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.637807] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[    1.637825] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.641933] hub 1-1:1.0: USB hub found
[    1.642130] hub 1-1:1.0: 4 ports detected
[    2.438004] [drm] Cannot find any crtc or sizes
[    3.797349] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.418986] systemd[1]: System time before build time, advancing clock.
[    4.568737] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.569809] systemd[1]: Detected architecture arm.
[    4.574438] systemd[1]: Set hostname to <spug0719BBEAA05B>.
[    5.353951] systemd[1]: Configuration file /etc/systemd/system/prometheus.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[    5.394128] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.395389] systemd[1]: Listening on Journal Socket.
[    5.396059] systemd[1]: Listening on udev Control Socket.
[    5.400257] systemd[1]: cgroup compatibility translation between legacy and unified hierarchy settings activated. See cgroup-compat debug messages for details.
[    5.401161] systemd[1]: Created slice System Slice.
[    5.410386] systemd[1]: Mounting POSIX Message Queue File System...
[    5.982011] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[    6.926948] systemd-journald[220]: Received request to flush runtime journal from PID 1
[    9.945689] usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
[   10.037454] usb 1-1.1: new high-speed USB device number 4 using musb-hdrc
[   10.949449] usb 1-1.1: device descriptor read/64, error -71
[   11.145529] usb 1-1-port1: attempt power cycle
[   11.550909] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   11.590531] systemd-journald[220]: File /var/log/journal/b05181e67872e0d743437eb459ac0ce6/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   16.633404] random: crng init done
[   16.633427] random: 7 urandom warning(s) missed due to ratelimiting
[   17.658529] systemd-journald[220]: File /var/log/journal/b05181e67872e0d743437eb459ac0ce6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   19.653645] usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
[   19.973442] usb 1-1.1: new high-speed USB device number 7 using musb-hdrc
[   20.053574] usb 1-1-port1: attempt power cycle
[   25.960428] using random self ethernet address
[   25.960447] using random host ethernet address
[   26.142813] using random self ethernet address
[   26.142832] using random host ethernet address
[   26.291647] aufs 4.19.17+-20190311
[   27.230809] usb0: HOST MAC 44:ea:d8:aa:05:b5
[   27.243951] usb0: MAC 44:ea:d8:aa:05:b6
[   27.245116] usb1: HOST MAC 44:ea:d8:aa:05:b8
[   27.255811] usb1: MAC 44:ea:d8:aa:05:b9
[   27.482003] configfs-gadget gadget: high-speed config #1: c
[   29.177409] usb 1-1.1: new high-speed USB device number 9 using musb-hdrc
[   29.337414] usb 1-1.1: new high-speed USB device number 10 using musb-hdrc
[   29.417605] usb 1-1-port1: attempt power cycle
[   34.334014] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   34.464682] Bridge firewalling registered
[   36.830004] net eth0: initializing cpsw version 1.12 (0)
[   36.918548] Atheros 8035 ethernet 4a101000.mdio:00: attached PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL)
[   38.329430] usb 1-1.1: new high-speed USB device number 12 using musb-hdrc
[   38.489491] usb 1-1.1: new high-speed USB device number 13 using musb-hdrc
[   38.569454] usb 1-1-port1: attempt power cycle
[   44.954033] Initializing XFRM netlink socket
[   47.489478] usb 1-1.1: new high-speed USB device number 15 using musb-hdrc
[   47.649454] usb 1-1.1: new high-speed USB device number 16 using musb-hdrc
[   47.729579] usb 1-1-port1: attempt power cycle
[   56.021462] usb 1-1.1: new high-speed USB device number 18 using musb-hdrc
[   56.517408] usb 1-1.1: device descriptor read/64, error -71
[   56.797473] usb 1-1.1: new high-speed USB device number 19 using musb-hdrc
[   56.877585] usb 1-1-port1: attempt power cycle
[   65.165454] usb 1-1.1: new high-speed USB device number 21 using musb-hdrc
[   65.533424] usb 1-1.1: new high-speed USB device number 22 using musb-hdrc
[   65.613555] usb 1-1-port1: attempt power cycle
[   73.893483] usb 1-1.1: new high-speed USB device number 24 using musb-hdrc
[   74.261499] usb 1-1.1: new high-speed USB device number 25 using musb-hdrc
[   74.341620] usb 1-1-port1: attempt power cycle



[   82.625403] usb 1-1.1: new high-speed USB device number 27 using musb-hdrc
[   82.785387] usb 1-1.1: new high-speed USB device number 28 using musb-hdrc
[   82.865620] usb 1-1-port1: attempt power cycle
[   91.157477] usb 1-1.1: new high-speed USB device number 30 using musb-hdrc
[   91.317474] usb 1-1.1: new high-speed USB device number 31 using musb-hdrc
[   91.397578] usb 1-1-port1: attempt power cycle
[   99.689541] usb 1-1.1: new high-speed USB device number 33 using musb-hdrc
[   99.849472] usb 1-1.1: new high-speed USB device number 34 using musb-hdrc
[   99.929642] usb 1-1-port1: attempt power cycle
[  108.225528] usb 1-1.1: new high-speed USB device number 36 using musb-hdrc
[  108.385514] usb 1-1.1: new high-speed USB device number 37 using musb-hdrc
[  108.465639] usb 1-1-port1: attempt power cycle
[  116.749484] usb 1-1.1: new high-speed USB device number 39 using musb-hdrc
[  116.909537] usb 1-1.1: new high-speed USB device number 40 using musb-hdrc
[  116.989793] usb 1-1-port1: attempt power cycle
[  125.273517] usb 1-1.1: new high-speed USB device number 42 using musb-hdrc
[  125.433515] usb 1-1.1: new high-speed USB device number 43 using musb-hdrc
[  125.513613] usb 1-1-port1: attempt power cycle
[  133.793486] usb 1-1.1: new high-speed USB device number 45 using musb-hdrc
[  133.953443] usb 1-1.1: new high-speed USB device number 46 using musb-hdrc
[  134.033651] usb 1-1-port1: attempt power cycle
[  142.317479] usb 1-1.1: new high-speed USB device number 48 using musb-hdrc
[  142.477505] usb 1-1.1: new high-speed USB device number 49 using musb-hdrc
[  142.557559] usb 1-1-port1: attempt power cycle
[  150.853540] usb 1-1.1: new high-speed USB device number 51 using musb-hdrc
[  151.013437] usb 1-1.1: new high-speed USB device number 52 using musb-hdrc
[  151.094765] usb 1-1-port1: attempt power cycle
[  159.369524] usb 1-1.1: new high-speed USB device number 54 using musb-hdrc
[  159.529410] usb 1-1.1: new high-speed USB device number 55 using musb-hdrc
[  159.609649] usb 1-1-port1: attempt power cycle
[  168.097441] usb 1-1.1: new high-speed USB device number 57 using musb-hdrc
[  168.257488] usb 1-1.1: new high-speed USB device number 58 using musb-hdrc
[  168.337623] usb 1-1-port1: attempt power cycle
[  176.605550] usb 1-1.1: new high-speed USB device number 60 using musb-hdrc
[  176.765528] usb 1-1.1: new high-speed USB device number 61 using musb-hdrc
[  176.845640] usb 1-1-port1: attempt power cycle
[  185.101428] usb 1-1.1: new high-speed USB device number 63 using musb-hdrc
[  185.261452] usb 1-1.1: new high-speed USB device number 64 using musb-hdrc
[  185.341613] usb 1-1-port1: attempt power cycle
[  193.605445] usb 1-1.1: new high-speed USB device number 66 using musb-hdrc
[  193.765425] usb 1-1.1: new high-speed USB device number 67 using musb-hdrc
[  193.845599] usb 1-1-port1: attempt power cycle
[  202.105527] usb 1-1.1: new high-speed USB device number 69 using musb-hdrc
[  202.265461] usb 1-1.1: new high-speed USB device number 70 using musb-hdrc
[  202.345637] usb 1-1-port1: attempt power cycle
[  210.597493] usb 1-1.1: new high-speed USB device number 72 using musb-hdrc
[  210.757435] usb 1-1.1: new high-speed USB device number 73 using musb-hdrc
[  210.837576] usb 1-1-port1: attempt power cycle
[  219.093482] usb 1-1.1: new high-speed USB device number 75 using musb-hdrc
[  219.253449] usb 1-1.1: new high-speed USB device number 76 using musb-hdrc
[  219.333581] usb 1-1-port1: attempt power cycle
[  227.577530] usb 1-1.1: new high-speed USB device number 78 using musb-hdrc
[  227.737528] usb 1-1.1: new high-speed USB device number 79 using musb-hdrc
[  227.817631] usb 1-1-port1: attempt power cycle