PowerShell script to make BambuStudio discover a specific printer by IP address, even if it is not on the same subnet (see BambuStudio Issue #702)

bambulab-discover.ps1

# Send the IP address of your BambuLab printer to port 2021/udp, which BambuStudio is listens on.
#
# Ensure your PC has firewall pot 2021/udp open. This is required as the proper response would usually go to the ephemeral source port that the M-SEARCH ssdp:discover message.
# But we are are blindly sending a response directly to the BambuStudio listening service port (2021/udp).
#
# Temporary solution to BambuStudio not allowing you to manually specify the Printer IP.
#
# Author(s): gashton <https://github.com/gashton>, Fritz webering <https://github.com/fritzw>
#
param (
   [string]$PRINTER_IP = "10.80.2.50"  # IP address of your BambuLab Printer
)
$TARGET_IP="127.0.0.1" # IP address of your PC running BambuStudio.
$PRINTER_USN="000000000000000" # Enter your own Printer Serial Number here
$PRINTER_DEV_MODEL="3DPrinter-X1-Carbon" # Set this to your model
# PRINTER_DEV_MODEL: https://github.com/bambulab/BambuStudio/tree/master/resources/printers
# X1C    : "3DPrinter-X1-Carbon"
# X1     : "3DPrinter-X1"
# X1E    : "C13"
# P1P    : "C11"
# P1S    : "C12"
# A1 mini: "N1"
# A1     : "N2S"
$PRINTER_DEV_NAME="MY-X1C" # Here you can choose any name you want for your printer, which is shown in the slicer.
$PRINTER_DEV_SIGNAL="-44" # Good Signal (Artificial), WiFi icon in BambuStudio will appear green with full-bars.
$PRINTER_DEV_CONNECT="lan" # LAN Mode
$PRINTER_DEV_BIND="free" # Not bound to a Cloud user-account.


$remoteudpport=2021           # port to send to
$sourceudpport = 0             # SourcePort, maybe empty uses and available port
$message = "HTTP/1.1 200 OK`r`nServer: Buildroot/2018.02-rc3 UPnP/1.0 ssdpd/1.8`r`nDate: $(date)`r`nLocation: ${PRINTER_IP}`r`nST: urn:bambulab-com:device:3dprinter:1`r`nEXT:`r`nUSN: ${PRINTER_USN}`r`nCache-Control: max-age=1800`r`nDevModel.bambu.com: ${PRINTER_DEV_MODEL}`r`nDevName.bambu.com: ${PRINTER_DEV_NAME}`r`nDevSignal.bambu.com: ${PRINTER_DEV_SIGNAL}`r`nDevConnect.bambu.com: ${PRINTER_DEV_CONNECT}`r`nDevBind.bambu.com: ${PRINTER_DEV_BIND}`r`n`r`n"

$udpClient = new-Object system.Net.Sockets.Udpclient($sourceudpport) 
$byteBuffer  = [System.Text.Encoding]::ASCII.GetBytes($message)
$sendbytes = $udpClient.Send($byteBuffer, $byteBuffer.length, $remoteip, $remoteudpport)
if ($sendbytes -ne $byteBuffer.length) {
   write-host "Mismatch bytes"
}

In Windows, you can have this script automatically run when BambuStudio or OrcaSlicer is launched instead of manually running the script or having it trigger on a schedule.

Note that I added a Start-Sleep -Seconds 10 parameter as the first line of the script to give OrcaSlicer 10 seconds to launch before executing the script. This has helped make the auto detection of the printer in OrcaSlicer fairly seamless.

Example below:
Line 1 | Start-Sleep -Seconds 10
Line 2 | # Send the IP address of your BambuLab printer to port 2021/udp, which BambuStudio is listens on.

Follow the steps provided by Paul's answer on this super user forum post "How to start a program when another one is started" (https://superuser.com/questions/745318/how-to-start-a-program-when-another-one-is-started) to enable security audit logging on successful program starts and creating the scheduled task.

Here is the custom XML I'm using on the New Event Filter box for the scheduled task trigger:
<QueryList>
<Query Id="0" Path="Security">
<Select Path="Security">
*[System[band(Keywords,9007199254740992) and (EventID=4688)]]
and
*[EventData[Data[@Name='NewProcessName'] and (Data='C:\Program Files\OrcaSlicer\orca-slicer.exe')]]
</Select>
</Query>
</QueryList>

Unfortunately, it seems like this got broken with the new v2.00.00.95 release of Bambu Studio.

Unfortunately, it seems like this got broken with the new v2.00.00.95 release of Bambu Studio.

I can confirm that. Is it possible to resolve this issue without reverting to version 1.x?

Not sure. Someone would have to get out Wireshark and see what the new version does differently from this script. Unfortunately I currently don't have a Windows PC in the same network as out printer.

If someone finds out something, I would be glad to adapt the script, so that it stays helpful for future users.

I'm using the same strategy for my Java-based GUI program. Since version 2.0.0, it's been impossible to send valid data to Bambu Studio. I spent the whole day researching and couldn't find a way to get Bambu Studio to accept the data and connect to the printer.
Maybe it's a limitation of my knowledge, but I tried everything, from dumping packets with Wireshark and trying to recreate them, to making it work for other printers in LAN mode across different networks, subnets, and VLANs.
Hopefully, someone else will find a solution.
It still works with the latest 1.x version, but not on any other 2.x version....

I tried different scripts and this one worked with Bambu Studio v2.xxx
https://github.com/jonans/bsnotify/tree/main
Maybe someone can port it to PowerShell. Here is what I ran in CMD:
py bsnotify.py <PRINTER_IP> <PRINTER_SERIAL> <LOCAL_PC_IP> "<PRINTER_NAME>"

@R3DPanda1
Thank you for your research. I’m also looking for a solution. I tried this method, but I didn’t use it because BambuStudio disconnects my printer after 5-10 seconds. Does it work for you without any issues?

Edit:
This only happens when the printer is connected to the cloud.
I can confirm that this Works very well

@R3DPanda1 Thank you for your research. I’m also looking for a solution. I tried this method, but I didn’t use it because BambuStudio disconnects my printer after 5-10 seconds. Does it work for you without any issues?

Edit: This only happens when the printer is connected to the cloud. I can confirm that this Works very well

I tested it remotely at work and it works fine for me. Made a click-to-run version in PowerShell (with ChatGPT). Here’s an anonymized version. (The local PC IP is detected automatically.)
BambuConnectorV2.ps1

For Mac users, I had Mr. Claude write something up to do the same thing and send SSDP over to my printer VLAN. It's working great, you can either run this Python script before opening Bambu Slicer, or you can set it up in LaunchAgent to have it run in the background. My printer shows up after a couple seconds in the slicer now instead of a couple minutes. It's digital duct tape but it'll do.

#!/usr/bin/env python3
"""
bambu_announce_loop.py

Repeatedly sends a fake SSDP announcement for your printer to Bambu
Studio's local listener (UDP port 2021 on localhost), so it shows up
in the device list within seconds instead of waiting on the printer's
own broadcast timer. Useful if your printer is on a different
VLAN/subnet than the machine running Bambu Studio.

Note: this only solves discovery — Bambu Studio still needs a normal
unicast network path to the printer's IP for everything after that.

Fill in the four values below, then run: python3 bambu_announce_loop.py

Model strings (see BambuStudio's resources/printers directory):
    X1C: "3DPrinter-X1-Carbon"   X1: "3DPrinter-X1"   X1E: "C13"
    P1P: "C11"   P1S: "C12"   A1 mini: "N1"   A1: "N2S"
"""

import socket
import time
from datetime import datetime, timezone

# ---- EDIT THESE THREE VALUES ----
PRINTER_IP = "192.168.1.100"        # your printer's actual IP address
PRINTER_SERIAL = "YOUR_SERIAL_HERE"  # printer's serial number
PRINTER_MODEL = "3DPrinter-X1-Carbon"  # see model strings above
PRINTER_NAME = "MyPrinter"          # any label — shown in Bambu Studio's device list
# ----------------------------------

TARGET_IP = "127.0.0.1"   # Bambu Studio always listens on localhost
TARGET_PORT = 2021
ANNOUNCE_INTERVAL_SECONDS = 5

DEV_SIGNAL = "-44"      # artificial signal strength; keeps the wifi icon full-bars
DEV_CONNECT = "lan"     # LAN mode
DEV_BIND = "free"       # not bound to a cloud account


def build_message() -> bytes:
    date_str = datetime.now(timezone.utc).strftime("%a, %d %b %Y %H:%M:%S GMT")
    msg = (
        "HTTP/1.1 200 OK\r\n"
        "Server: Buildroot/2018.02-rc3 UPnP/1.0 ssdpd/1.8\r\n"
        f"Date: {date_str}\r\n"
        f"Location: {PRINTER_IP}\r\n"
        "ST: urn:bambulab-com:device:3dprinter:1\r\n"
        "EXT:\r\n"
        f"USN: {PRINTER_SERIAL}\r\n"
        "Cache-Control: max-age=1800\r\n"
        f"DevModel.bambu.com: {PRINTER_MODEL}\r\n"
        f"DevName.bambu.com: {PRINTER_NAME}\r\n"
        f"DevSignal.bambu.com: {DEV_SIGNAL}\r\n"
        f"DevConnect.bambu.com: {DEV_CONNECT}\r\n"
        f"DevBind.bambu.com: {DEV_BIND}\r\n"
        "\r\n"
    )
    return msg.encode("ascii")


def main():
    print(f"Announcing '{PRINTER_NAME}' ({PRINTER_IP}) to Bambu Studio every "
          f"{ANNOUNCE_INTERVAL_SECONDS}s. Press Ctrl+C to stop.")
    message = build_message()
    with socket.socket(socket.AF_INET, socket.SOCK_DGRAM) as sock:
        try:
            while True:
                sock.sendto(message, (TARGET_IP, TARGET_PORT))
                print(f"  sent announce for {PRINTER_NAME} ({PRINTER_IP})")
                time.sleep(ANNOUNCE_INTERVAL_SECONDS)
        except KeyboardInterrupt:
            print("\nStopped.")


if __name__ == "__main__":
    main()