Skip to content

Instantly share code, notes, and snippets.

@gavinmcfall
gavinmcfall / pm9a3_fw_update.md
Created June 15, 2025 23:24
How to update the firmware on your Samsunug PM9A3 (MS-01)

How to update the firmware on your Samsunug PM9A3 (MS-01)

@gavinmcfall
gavinmcfall / Fresh-Steamdeck-Setup.md
Last active November 16, 2024 03:46
Starting Fresh on a Steamdeck

Steam Deck - Clean Install and Config

Context

  • I have a 1TB Steamdeck OLED. The steps here should world for any steamdeck. That said, YMMV (Your mialge may vary)
  • This is primarily for my own benefit, but feel free to comment if you see any errors, have some suggestions, or great ideas.

Step One - Fresh Install of Steam OS

  1. Start with the Steamdeck Recovery page located here
@gavinmcfall
gavinmcfall / Mixed-Protocol-Permissions.md
Last active November 12, 2024 18:10
How to get Mixed-Protocol Permissions working with Truenas Scale, Kubernetes and Windows

Mixed-Protocol Permissings

Context

  • NAS: I run TrueNAS SCALE on a Dell R730 which is running Proxmox has the Host OS with TrueNAS SCALE as a VM with Disks passed through
  • K8S: I run a 3 node cluster of Minisforum MS-01s running Talos Linux has the OS
  • PC: The PCs on network are primarily Windows 11, With one MacOS Laptop
  • Other: Phones and Tables are running iOS

What is NFS?

@gavinmcfall
gavinmcfall / tb-talos.md
Last active May 4, 2025 00:59
Thunderbolt Networking on Talos

How To: Thunderbolt Networking on Talos

I have a cluster of 3 Minisforum MS-01 Mini PCs running Talos Linux for my k8s cluster. Previously, I had set these machines up using Debian & K3s for the cluster and configured Thunderbolt Networking by follow this video by Jim's Garage Which is baed on this gist series from scyto

Cabling

This is how I have mine connected, this means that each one of the my 3 nodes has a cable going to the other two nodes MS-01_TB_Cabling