ghoneycutt · October 15, 2015 20:09 · Oct 15, 2015
diff --git a/el6-sysconfig-varnish b/el6-sysconfig-varnish
@@ -0,0 +1,112 @@
+# Configuration file for varnish
+#
+# /etc/init.d/varnish expects the variable $DAEMON_OPTS to be set from this
+# shell script fragment.
+#
+
+# Maximum number of open files (for ulimit -n)
+NFILES=131072
+
+# Locked shared memory (for ulimit -l)
+# Default log size is 82MB + header
+MEMLOCK=82000
+
+# Maximum number of threads (for ulimit -u)
+NPROCS="unlimited"
+
+# Maximum size of corefile (for ulimit -c). Default in Fedora is 0
+# DAEMON_COREFILE_LIMIT="unlimited"
+
+# Set this to 1 to make init script reload try to switch vcl without restart.
+# To make this work, you need to set the following variables
+# explicit: VARNISH_VCL_CONF, VARNISH_ADMIN_LISTEN_ADDRESS,
+# VARNISH_ADMIN_LISTEN_PORT, VARNISH_SECRET_FILE, or in short,
+# use Alternative 3, Advanced configuration, below
+RELOAD_VCL=1
+
+# This file contains 4 alternatives, please use only one.
+
+## Alternative 1, Minimal configuration, no VCL
+#
+# Listen on port 6081, administration on localhost:6082, and forward to
+# content server on localhost:8080.  Use a fixed-size cache file.
+#
+#DAEMON_OPTS="-a :6081 \
+#             -T localhost:6082 \
+#             -b localhost:8080 \
+#             -u varnish -g varnish \
+#             -s file,/var/lib/varnish/varnish_storage.bin,1G"
+
+
+## Alternative 2, Configuration with VCL
+#
+# Listen on port 6081, administration on localhost:6082, and forward to
+# one content server selected by the vcl file, based on the request.  Use a
+# fixed-size cache file.
+#
+#DAEMON_OPTS="-a :6081 \
+#             -T localhost:6082 \
+#             -f /etc/varnish/default.vcl \
+#             -u varnish -g varnish \
+#             -S /etc/varnish/secret \
+#             -s file,/var/lib/varnish/varnish_storage.bin,1G"
+
+
+## Alternative 3, Advanced configuration
+#
+# See varnishd(1) for more information.
+#
+# # Main configuration file. You probably want to change it :)
+VARNISH_VCL_CONF=/etc/varnish/default.vcl
+#
+# # Default address and port to bind to
+# # Blank address means all IPv4 and IPv6 interfaces, otherwise specify
+# # a host name, an IPv4 dotted quad, or an IPv6 address in brackets.
+# VARNISH_LISTEN_ADDRESS=
+VARNISH_LISTEN_PORT=6081
+#
+# # Telnet admin interface listen address and port
+VARNISH_ADMIN_LISTEN_ADDRESS=127.0.0.1
+VARNISH_ADMIN_LISTEN_PORT=6082
+#
+# # Shared secret file for admin interface
+VARNISH_SECRET_FILE=/etc/varnish/secret
+#
+# # The minimum number of worker threads to start
+VARNISH_MIN_THREADS=50
+#
+# # The Maximum number of worker threads to start
+VARNISH_MAX_THREADS=1000
+#
+# # Idle timeout for worker threads
+VARNISH_THREAD_TIMEOUT=120
+#
+# # Cache file location
+VARNISH_STORAGE_FILE=/var/lib/varnish/varnish_storage.bin
+#
+# # Cache file size: in bytes, optionally using k / M / G / T suffix,
+# # or in percentage of available disk space using the % suffix.
+VARNISH_STORAGE_SIZE=1G
+#
+# # Backend storage specification
+VARNISH_STORAGE="file,${VARNISH_STORAGE_FILE},${VARNISH_STORAGE_SIZE}"
+#
+# # Default TTL used when the backend does not specify one
+VARNISH_TTL=120
+#
+# # DAEMON_OPTS is used by the init script.  If you add or remove options, make
+# # sure you update this section, too.
+DAEMON_OPTS="-a ${VARNISH_LISTEN_ADDRESS}:${VARNISH_LISTEN_PORT} \
+             -f ${VARNISH_VCL_CONF} \
+             -T ${VARNISH_ADMIN_LISTEN_ADDRESS}:${VARNISH_ADMIN_LISTEN_PORT} \
+             -t ${VARNISH_TTL} \
+             -w ${VARNISH_MIN_THREADS},${VARNISH_MAX_THREADS},${VARNISH_THREAD_TIMEOUT} \
+             -u varnish -g varnish \
+             -S ${VARNISH_SECRET_FILE} \
+             -s ${VARNISH_STORAGE}"
+#
+
+
+## Alternative 4, Do It Yourself. See varnishd(1) for more information.
+#
+# DAEMON_OPTS=""