djdembeck

#!/bin/bash

# Polls AT&T's DHCP server for updates, to keep static IPs alive.
# This allows UDM Pro users to set their DHCP IP as 'static' in the 'Internet' section
# allowing the use of static IP configuration in Unifi Network.
# 1. Find your DHCP IP.
# 2. Set Internet IPv4 to Static IP, and enter your DHCP address. Gateway is going to be .1
# 3. Add your static IP block to Additional IP Addresses
# 4. Place this script in the on_boot.d/ directory: https://github.com/unifi-utilities/unifios-utilities/tree/main/on-boot-script
# 5. After reboot, check the script is working: cat /var/log/udhcpc.log

gangefors

Install TrueNAS SCALE on a partition instead of the full disk

The TrueNAS installer doesn't have a way to use anything less than the full device. This is usually a waste of resources when installing to a modern NVMe which is usually several hundred of GB. TrueNAS SCALE will use only a few GB for its system files so installing to a 16GB partition would be helpful.

The easiest way to solve this is to modify the installer script before starting the installation process.

rise-worlds

for 4.2.4 or higher, 4.2.5,4.2.6,4.3.7, it's works, this is the way which makes Always in evaluation mode.

1. open Terminal, go to the dir : cd /Applications/Beyond Compare.app/Contents/MacOS
2. change the name BCompare to BCompare.bak: mv BCompare BCompare.bak
3. touch a file name BCompare , and chmod a+ux BCompare : touch BCompare && chmod a+ux BCompare
4. open BCompare with text editor, insert the script :

#!/bin/bash
rm "/Users/$(whoami)/Library/Application Support/Beyond Compare/registry.dat"
"`dirname "$0"`"/BCompare.bak $@