Arduino Uno Wifi sketch for sending HTTP request based on humidity and temperature

Vlasy.ino

#include <Wire.h>
#include <Ciao.h>

#define CONNECTOR     "rest" 
#define SERVER_ADDR   "" // gateway from https://gist.github.com/jnv/27666983e88fb271e1528b5e538b2f2a

#define SMS_LOGIN  ""
#define SMS_PASSWORD ""
#define TEL_NUM ""

#include <dht.h>

dht DHT;

#define DHT22_PIN 9

struct
{
    uint32_t total;
    uint32_t ok;
    uint32_t crc_error;
    uint32_t time_out;
    uint32_t connect;
    uint32_t ack_l;
    uint32_t ack_h;
    uint32_t unknown;
} stat = { 0,0,0,0,0,0,0,0};

void setup() {
  Serial.begin(9600);
  Ciao.begin(); // CIAO INIT
  sendmessage();
}

void sendmessage() {
  int chk = DHT.read22(DHT22_PIN);
  Serial.print(DHT.humidity, 1);
  Serial.print(",\t");
  Serial.print(DHT.temperature, 1);
  Serial.println();
  
  String humidily_cat;
  
  if (DHT.humidity > 60) {
    humidily_cat = "1";
  }
  else {
    humidily_cat = "2";
  }

  /*String uri = "/apilite30/sms?text=";
  uri += message;
  uri += "&number=";
  uri += TEL_NUM;
  uri += "&login=";
  uri += SMS_LOGIN;
  uri += "&password=";
  uri += SMS_PASSWORD;*/
    
  //Serial.println(uri);
  CiaoData data = Ciao.write(CONNECTOR, SERVER_ADDR, "/?h=" + humidily_cat + "&t=" + String(round(DHT.temperature)));
  
  //if (!data.isEmpty()) {
      Serial.println( "State: " + String (data.get(1)) );
      Serial.println( "Response: " + String (data.get(2)) );
  //}
  //else { 
  //    Serial.println("Write Error");
  //}
  

}

void loop() {
  
}