janasco/AnyDesk-Reset.cmd

info-ticoworks · 2025-07-04T00:14:19Z

Que excelente!!! Muchas gracias!!

AR-69 · 2025-07-09T14:44:00Z

All methods doesn't seem to work any more for me.
I used to just delete the following two files:
"C:\ProgramData\AnyDesk\system.conf"
"C:\ProgramData\AnyDesk\service.conf"

and it would work. Now that is not the case anymore. Even with all the scripts provided here, none of them worked.
Each time Anydesk tries to connect to the network it fails and I get "Disconnected from the network".
Anyone else having this issue as well?

itikumyap · 2025-07-22T03:07:10Z

i have the same issue like AR 69 above anything doesnt seems to work anymore

melodiazz · 2025-07-22T05:46:46Z

can we do this on macos?

digitalonellc · 2025-07-22T15:27:37Z

i have the same issue like AR 69 above anything doesnt seems to work anymore

Uninstall, change Mac address, run script, reinstall.

TechMorgan · 2025-07-24T14:48:52Z

Can someone tell me whether the above code or the scripts below work?

https://github.com/henriquelucas/Reset-Licen-a-Anydesk
https://github.com/MKultra6969/AnyDesk-reset

ugurkan-syntonym · 2025-08-13T10:37:25Z

anyone for macos?

digitalonellc · 2025-08-13T14:35:05Z

Quit Anydesk Remove Anydesk from Applications folder Open terminal type: rm -rf ~/.anydesk sudo sh -c "curl https://raw.githubusercontent.com/shilch/macchanger/master/macchanger.sh > /usr/local/bin/macchanger && chmod +x /usr/local/bin/macchanger" route -n get default | grep interface sudo macchanger -r - p wlan0 (Or what interface showed in previous command --usually en0 wlan0 or similar) Close terminal. Install anydesk again Start Anydesk (if it shows no id or the id is 0) then do a Logout from your MacOS user Login again and start Anydesk

…

On Wed, Aug 13, 2025 at 6:37 AM ugurkan-syntonym ***@***.***> wrote: ***@***.**** commented on this gist. ------------------------------ anyone for macos? — Reply to this email directly, view it on GitHub <https://gist.github.com/janasco/c6168d17ed6eb4b6eaf7fd46fb775f60#gistcomment-5718108> or unsubscribe <https://github.com/notifications/unsubscribe-auth/AO6VJAS3VVETJECVCGMQCST3NMIPVBFKMF2HI4TJMJ2XIZLTSKBKK5TBNR2WLJDUOJ2WLJDOMFWWLO3UNBZGKYLEL5YGC4TUNFRWS4DBNZ2F6YLDORUXM2LUPGBKK5TBNR2WLJDHNFZXJJDOMFWWLK3UNBZGKYLEL52HS4DFVRZXKYTKMVRXIX3UPFYGLK2HNFZXIQ3PNVWWK3TUUZ2G64DJMNZZDAVEOR4XAZNEM5UXG5FFOZQWY5LFVEYTEMZYGQ3DCNZRU52HE2LHM5SXFJTDOJSWC5DF> . You are receiving this email because you commented on the thread. Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub> .

digitalonellc · 2025-08-13T14:45:10Z

Can someone tell me whether the above code or the scripts below work?

https://github.com/henriquelucas/Reset-Licen-a-Anydesk https://github.com/MKultra6969/AnyDesk-reset

They work, use the ones in the comments. I added a post below with all the OS instructions.

digitalonellc · 2025-08-13T14:50:45Z

Windows Instructions:

open terminal or cmd type notepad anydeskreset.bat

Paste the following, and after Run the batch file by double clicking or right click run as administrator.


:: BatchGotAdmin
:-------------------------------------
REM  --> Check for permissions
    IF "%PROCESSOR_ARCHITECTURE%" EQU "amd64" (
>nul 2>&1 "%SYSTEMROOT%\SysWOW64\cacls.exe" "%SYSTEMROOT%\SysWOW64\config\system"
) ELSE (
>nul 2>&1 "%SYSTEMROOT%\system32\cacls.exe" "%SYSTEMROOT%\system32\config\system"
)

REM --> If error flag set, we do not have admin.
if '%errorlevel%' NEQ '0' (
    echo Requesting administrative privileges...
    goto UACPrompt
) else ( goto gotAdmin )

:UACPrompt
    echo Set UAC = CreateObject^("Shell.Application"^) > "%temp%\getadmin.vbs"
    set params= %*
    echo UAC.ShellExecute "cmd.exe", "/c ""%~s0"" %params:"=""%", "", "runas", 1 >> "%temp%\getadmin.vbs"

    "%temp%\getadmin.vbs"
    del "%temp%\getadmin.vbs"
    exit /B

:gotAdmin
    pushd "%CD%"
    CD /D "%~dp0"

@echo off & setlocal enableextensions
title Reset AnyDesk
reg query HKEY_USERS\S-1-5-19 >NUL || (echo Please Run as administrator.& pause >NUL&exit)
chcp 437
call :stop_any
del /f "%ALLUSERSPROFILE%\AnyDesk\service.conf"
del /f "%APPDATA%\AnyDesk\service.conf"
copy /y "%APPDATA%\AnyDesk\user.conf" "%temp%\"
rd /s /q "%temp%\thumbnails" 2>NUL
xcopy /c /e /h /r /y /i /k "%APPDATA%\AnyDesk\thumbnails" "%temp%\thumbnails"
del /f /a /q "%ALLUSERSPROFILE%\AnyDesk\*"
del /f /a /q "%APPDATA%\AnyDesk\*"
call :start_any
:lic
type "%ALLUSERSPROFILE%\AnyDesk\system.conf" | find "ad.anynet.id=" || goto lic
call :stop_any
move /y "%temp%\user.conf" "%APPDATA%\AnyDesk\user.conf"
xcopy /c /e /h /r /y /i /k "%temp%\thumbnails" "%APPDATA%\AnyDesk\thumbnails" 
rd /s /q "%temp%\thumbnails"
call :start_any
echo *********
echo Completed.
echo(
goto :eof
 
:start_any
sc start AnyDesk
sc start AnyDesk
if %errorlevel% neq 1056 goto start_any
set AnyDesk1=%SystemDrive%\Program Files (x86)\AnyDesk\AnyDesk.exe
set AnyDesk2=%SystemDrive%\Program Files\AnyDesk\AnyDesk.exe
if exist "%AnyDesk1%" start "" "%AnyDesk1%"
if exist "%AnyDesk2%" start "" "%AnyDesk2%"
exit /b
 
:stop_any
sc stop AnyDesk
sc stop AnyDesk
if %errorlevel% neq 1062 goto stop_any
taskkill /f /im "AnyDesk.exe"
exit /b

Linux instructions:

Open terminal



#use ifconfig to determine your wlan interface and use below to set random and permanent 
Replace your-interface-from-ifconfig with your interface name usually wlp3s0 wlan0, wlp0s0, etc.

ifconfig 
sudo ifconfig your-interface-from-ifconfig down
sudo apt -y install macchanger
sudo macchanger -r -b your-interface-from-ifconfig
sudo ifconfig your-interface-from-ifconfig up
rm -rf ~/.anydesk
sudo apt autopurge anydesk -y
sudo apt -y install anydesk

To make a shortcut to the script, sudo pico /sbin/resetanydesk and paste code above.
change the wlan interface and save to /sbin/resetanydesk by pressing ctrl +o in pico then ctrl +x to exit, then run
chmod +x /sbin/resetanydesk and run resetanydesk

MacOS:

Quit Anydesk
Remove Anydesk from Applications folder

Open terminal
type:

mv ~/.anydesk ~/.anydesk.old
rm -rf ~/.anydesk

sudo sh -c "curl https://raw.githubusercontent.com/shilch/macchanger/master/macchanger.sh > /usr/local/bin/macchanger && chmod +x /usr/local/bin/macchanger"

route -n get default | grep interface

sudo macchanger -r - p your-interface-name-from-previous-step

Download, install and Start Any desk (if it shows no id or the id is 0) then do a Logout from your MacOS user

Login again and start Anydesk

to revert changes
rm -rf ~/.anydesk
mv ~/.anydesk.old ~/.anydesk

GERENCIALG7 · 2025-08-14T20:17:22Z

boa tarde galera, não consigo tirar o 999 segundos do Anydesk de jeito nenhum fiz de tudo, apaguei na pasta progam data, nos registro e nada

edersilvago · 2025-08-19T17:13:15Z

Is there an improvement to this cmd so that it can preserve the AnyDesk Alias? This feature would be perfect.

GERENCIALG7 · 2025-08-19T17:52:13Z

boa tarde galera, não consigo tirar o 999 segundos do Anydesk de jeito nenhum fiz de tudo, apaguei na pasta progam data, nos registro e nada

edersilvago · 2025-08-21T12:13:15Z

boa tarde galera, não consigo tirar o 999 segundos do Anydesk de jeito nenhum fiz de tudo, apaguei na pasta progam data, nos registro e nada

Aqui eu faço da seguinte maneira, uso a versão 5.5.3, ela não dá banimento.

ghost · 2025-08-25T04:03:16Z

Windows Instructions:

open terminal or cmd type notepad anydeskreset.bat

Paste the following, and after Run the batch file by double clicking or right click run as administrator.


:: BatchGotAdmin
:-------------------------------------
REM  --> Check for permissions
    IF "%PROCESSOR_ARCHITECTURE%" EQU "amd64" (
>nul 2>&1 "%SYSTEMROOT%\SysWOW64\cacls.exe" "%SYSTEMROOT%\SysWOW64\config\system"
) ELSE (
>nul 2>&1 "%SYSTEMROOT%\system32\cacls.exe" "%SYSTEMROOT%\system32\config\system"
)

REM --> If error flag set, we do not have admin.
if '%errorlevel%' NEQ '0' (
    echo Requesting administrative privileges...
    goto UACPrompt
) else ( goto gotAdmin )

:UACPrompt
    echo Set UAC = CreateObject^("Shell.Application"^) > "%temp%\getadmin.vbs"
    set params= %*
    echo UAC.ShellExecute "cmd.exe", "/c ""%~s0"" %params:"=""%", "", "runas", 1 >> "%temp%\getadmin.vbs"

    "%temp%\getadmin.vbs"
    del "%temp%\getadmin.vbs"
    exit /B

:gotAdmin
    pushd "%CD%"
    CD /D "%~dp0"

@echo off & setlocal enableextensions
title Reset AnyDesk
reg query HKEY_USERS\S-1-5-19 >NUL || (echo Please Run as administrator.& pause >NUL&exit)
chcp 437
call :stop_any
del /f "%ALLUSERSPROFILE%\AnyDesk\service.conf"
del /f "%APPDATA%\AnyDesk\service.conf"
copy /y "%APPDATA%\AnyDesk\user.conf" "%temp%\"
rd /s /q "%temp%\thumbnails" 2>NUL
xcopy /c /e /h /r /y /i /k "%APPDATA%\AnyDesk\thumbnails" "%temp%\thumbnails"
del /f /a /q "%ALLUSERSPROFILE%\AnyDesk\*"
del /f /a /q "%APPDATA%\AnyDesk\*"
call :start_any
:lic
type "%ALLUSERSPROFILE%\AnyDesk\system.conf" | find "ad.anynet.id=" || goto lic
call :stop_any
move /y "%temp%\user.conf" "%APPDATA%\AnyDesk\user.conf"
xcopy /c /e /h /r /y /i /k "%temp%\thumbnails" "%APPDATA%\AnyDesk\thumbnails" 
rd /s /q "%temp%\thumbnails"
call :start_any
echo *********
echo Completed.
echo(
goto :eof
 
:start_any
sc start AnyDesk
sc start AnyDesk
if %errorlevel% neq 1056 goto start_any
set AnyDesk1=%SystemDrive%\Program Files (x86)\AnyDesk\AnyDesk.exe
set AnyDesk2=%SystemDrive%\Program Files\AnyDesk\AnyDesk.exe
if exist "%AnyDesk1%" start "" "%AnyDesk1%"
if exist "%AnyDesk2%" start "" "%AnyDesk2%"
exit /b
 
:stop_any
sc stop AnyDesk
sc stop AnyDesk
if %errorlevel% neq 1062 goto stop_any
taskkill /f /im "AnyDesk.exe"
exit /b

Linux instructions:

Open terminal



#use ifconfig to determine your wlan interface and use below to set random and permanent 
Replace your-interface-from-ifconfig with your interface name usually wlp3s0 wlan0, wlp0s0, etc.

ifconfig 
sudo ifconfig your-interface-from-ifconfig down
sudo apt -y install macchanger
sudo macchanger -r -b your-interface-from-ifconfig
sudo ifconfig your-interface-from-ifconfig up
rm -rf ~/.anydesk
sudo apt autopurge anydesk -y
sudo apt -y install anydesk

To make a shortcut to the script, sudo pico /sbin/resetanydesk and paste code above. change the wlan interface and save to /sbin/resetanydesk by pressing ctrl +o in pico then ctrl +x to exit, then run chmod +x /sbin/resetanydesk and run resetanydesk

MacOS:

Quit Anydesk Remove Anydesk from Applications folder

Open terminal type:

mv ~/.anydesk ~/.anydesk.old
rm -rf ~/.anydesk

sudo sh -c "curl https://raw.githubusercontent.com/shilch/macchanger/master/macchanger.sh > /usr/local/bin/macchanger && chmod +x /usr/local/bin/macchanger"

route -n get default | grep interface

sudo macchanger -r - p your-interface-name-from-previous-step

Download, install and Start Any desk (if it shows no id or the id is 0) then do a Logout from your MacOS user

Login again and start Anydesk

to revert changes rm -rf ~/.anydesk mv ~/.anydesk.old ~/.anydesk

it does not work on MacOS. The ID was changed but still get the license notification.

bruak · 2025-08-27T10:33:09Z

#use ifconfig to determine your wlan interface and use below to set random and permanent
Replace your-interface-from-ifconfig with your interface name usually wlp3s0 wlan0, wlp0s0, etc.

ifconfig
sudo ifconfig your-interface-from-ifconfig down
sudo apt -y install macchanger
sudo macchanger -r -b your-interface-from-ifconfig
sudo ifconfig your-interface-from-ifconfig up
rm -rf ~/.anydesk
sudo apt autopurge anydesk -y
sudo apt -y install anydesk

still works, but i did with my wired connection ensp2n0

Windows Instructions:
open terminal or cmd type notepad anydeskreset.bat
Paste the following, and after Run the batch file by double clicking or right click run as administrator.


:: BatchGotAdmin
:-------------------------------------
REM  --> Check for permissions
    IF "%PROCESSOR_ARCHITECTURE%" EQU "amd64" (
>nul 2>&1 "%SYSTEMROOT%\SysWOW64\cacls.exe" "%SYSTEMROOT%\SysWOW64\config\system"
) ELSE (
>nul 2>&1 "%SYSTEMROOT%\system32\cacls.exe" "%SYSTEMROOT%\system32\config\system"
)

REM --> If error flag set, we do not have admin.
if '%errorlevel%' NEQ '0' (
    echo Requesting administrative privileges...
    goto UACPrompt
) else ( goto gotAdmin )

:UACPrompt
    echo Set UAC = CreateObject^("Shell.Application"^) > "%temp%\getadmin.vbs"
    set params= %*
    echo UAC.ShellExecute "cmd.exe", "/c ""%~s0"" %params:"=""%", "", "runas", 1 >> "%temp%\getadmin.vbs"

    "%temp%\getadmin.vbs"
    del "%temp%\getadmin.vbs"
    exit /B

:gotAdmin
    pushd "%CD%"
    CD /D "%~dp0"

@echo off & setlocal enableextensions
title Reset AnyDesk
reg query HKEY_USERS\S-1-5-19 >NUL || (echo Please Run as administrator.& pause >NUL&exit)
chcp 437
call :stop_any
del /f "%ALLUSERSPROFILE%\AnyDesk\service.conf"
del /f "%APPDATA%\AnyDesk\service.conf"
copy /y "%APPDATA%\AnyDesk\user.conf" "%temp%\"
rd /s /q "%temp%\thumbnails" 2>NUL
xcopy /c /e /h /r /y /i /k "%APPDATA%\AnyDesk\thumbnails" "%temp%\thumbnails"
del /f /a /q "%ALLUSERSPROFILE%\AnyDesk\*"
del /f /a /q "%APPDATA%\AnyDesk\*"
call :start_any
:lic
type "%ALLUSERSPROFILE%\AnyDesk\system.conf" | find "ad.anynet.id=" || goto lic
call :stop_any
move /y "%temp%\user.conf" "%APPDATA%\AnyDesk\user.conf"
xcopy /c /e /h /r /y /i /k "%temp%\thumbnails" "%APPDATA%\AnyDesk\thumbnails" 
rd /s /q "%temp%\thumbnails"
call :start_any
echo *********
echo Completed.
echo(
goto :eof
 
:start_any
sc start AnyDesk
sc start AnyDesk
if %errorlevel% neq 1056 goto start_any
set AnyDesk1=%SystemDrive%\Program Files (x86)\AnyDesk\AnyDesk.exe
set AnyDesk2=%SystemDrive%\Program Files\AnyDesk\AnyDesk.exe
if exist "%AnyDesk1%" start "" "%AnyDesk1%"
if exist "%AnyDesk2%" start "" "%AnyDesk2%"
exit /b
 
:stop_any
sc stop AnyDesk
sc stop AnyDesk
if %errorlevel% neq 1062 goto stop_any
taskkill /f /im "AnyDesk.exe"
exit /b

Linux instructions:
Open terminal



#use ifconfig to determine your wlan interface and use below to set random and permanent 
Replace your-interface-from-ifconfig with your interface name usually wlp3s0 wlan0, wlp0s0, etc.

ifconfig 
sudo ifconfig your-interface-from-ifconfig down
sudo apt -y install macchanger
sudo macchanger -r -b your-interface-from-ifconfig
sudo ifconfig your-interface-from-ifconfig up
rm -rf ~/.anydesk
sudo apt autopurge anydesk -y
sudo apt -y install anydesk

To make a shortcut to the script, sudo pico /sbin/resetanydesk and paste code above. change the wlan interface and save to /sbin/resetanydesk by pressing ctrl +o in pico then ctrl +x to exit, then run chmod +x /sbin/resetanydesk and run resetanydesk
MacOS:
Quit Anydesk Remove Anydesk from Applications folder
Open terminal type:

mv ~/.anydesk ~/.anydesk.old
rm -rf ~/.anydesk

sudo sh -c "curl https://raw.githubusercontent.com/shilch/macchanger/master/macchanger.sh > /usr/local/bin/macchanger && chmod +x /usr/local/bin/macchanger"

route -n get default | grep interface

sudo macchanger -r - p your-interface-name-from-previous-step

Download, install and Start Any desk (if it shows no id or the id is 0) then do a Logout from your MacOS user
Login again and start Anydesk
to revert changes rm -rf ~/.anydesk mv ~/.anydesk.old ~/.anydesk

it does not work on MacOS. The ID was changed but still get the license notification.

JonnyMonk3y · 2025-10-07T18:59:43Z

anyone for macos?

If you are on a Mac... Use the Screen Sharing App located in the Utilities folder... Don't have to use AnyDesk or any other...

dashpops · 2025-10-27T10:42:13Z

Linux instructions:

#use ifconfig to determine your wlan interface and use below to set random and burned in

sudo ifconfig wlp2s0 down sudo apt -y install macchanger sudo macchanger -r -b wlp2s0 sudo ifconfig wlp2s0 up rm -rf ~/.anydesk sudo apt autopurge anydesk -y sudo apt -y install anydesk

#save to /sbin/resetanydesk then chmod +x /sbin/resetanydesk and run resetanydesk

This will wipe your settings and hosts, if you want to save them: mv ~/.anydesk ~/.anydesk.old

I believe this no longer works, Im not on a wlan but on ethernet, not sure if that makes a difference though, Anydevk v7.1.0-1

dashpops · 2025-10-27T10:42:55Z

#use ifconfig to determine your wlan interface and use below to set random and permanent Replace your-interface-from-ifconfig with your interface name usually wlp3s0 wlan0, wlp0s0, etc.

ifconfig sudo ifconfig your-interface-from-ifconfig down sudo apt -y install macchanger sudo macchanger -r -b your-interface-from-ifconfig sudo ifconfig your-interface-from-ifconfig up rm -rf ~/.anydesk sudo apt autopurge anydesk -y sudo apt -y install anydesk

still works, but i did with my wired connection ensp2n0
Windows Instructions:
open terminal or cmd type notepad anydeskreset.bat
Paste the following, and after Run the batch file by double clicking or right click run as administrator.
:: BatchGotAdmin
:-------------------------------------
REM  --> Check for permissions
    IF "%PROCESSOR_ARCHITECTURE%" EQU "amd64" (
>nul 2>&1 "%SYSTEMROOT%\SysWOW64\cacls.exe" "%SYSTEMROOT%\SysWOW64\config\system"
) ELSE (
>nul 2>&1 "%SYSTEMROOT%\system32\cacls.exe" "%SYSTEMROOT%\system32\config\system"
)

REM --> If error flag set, we do not have admin.
if '%errorlevel%' NEQ '0' (
    echo Requesting administrative privileges...
    goto UACPrompt
) else ( goto gotAdmin )

:UACPrompt
    echo Set UAC = CreateObject^("Shell.Application"^) > "%temp%\getadmin.vbs"
    set params= %*
    echo UAC.ShellExecute "cmd.exe", "/c ""%~s0"" %params:"=""%", "", "runas", 1 >> "%temp%\getadmin.vbs"

    "%temp%\getadmin.vbs"
    del "%temp%\getadmin.vbs"
    exit /B

:gotAdmin
    pushd "%CD%"
    CD /D "%~dp0"

@echo off & setlocal enableextensions
title Reset AnyDesk
reg query HKEY_USERS\S-1-5-19 >NUL || (echo Please Run as administrator.& pause >NUL&exit)
chcp 437
call :stop_any
del /f "%ALLUSERSPROFILE%\AnyDesk\service.conf"
del /f "%APPDATA%\AnyDesk\service.conf"
copy /y "%APPDATA%\AnyDesk\user.conf" "%temp%\"
rd /s /q "%temp%\thumbnails" 2>NUL
xcopy /c /e /h /r /y /i /k "%APPDATA%\AnyDesk\thumbnails" "%temp%\thumbnails"
del /f /a /q "%ALLUSERSPROFILE%\AnyDesk\*"
del /f /a /q "%APPDATA%\AnyDesk\*"
call :start_any
:lic
type "%ALLUSERSPROFILE%\AnyDesk\system.conf" | find "ad.anynet.id=" || goto lic
call :stop_any
move /y "%temp%\user.conf" "%APPDATA%\AnyDesk\user.conf"
xcopy /c /e /h /r /y /i /k "%temp%\thumbnails" "%APPDATA%\AnyDesk\thumbnails" 
rd /s /q "%temp%\thumbnails"
call :start_any
echo *********
echo Completed.
echo(
goto :eof
 
:start_any
sc start AnyDesk
sc start AnyDesk
if %errorlevel% neq 1056 goto start_any
set AnyDesk1=%SystemDrive%\Program Files (x86)\AnyDesk\AnyDesk.exe
set AnyDesk2=%SystemDrive%\Program Files\AnyDesk\AnyDesk.exe
if exist "%AnyDesk1%" start "" "%AnyDesk1%"
if exist "%AnyDesk2%" start "" "%AnyDesk2%"
exit /b
 
:stop_any
sc stop AnyDesk
sc stop AnyDesk
if %errorlevel% neq 1062 goto stop_any
taskkill /f /im "AnyDesk.exe"
exit /b
Linux instructions:
Open terminal
#use ifconfig to determine your wlan interface and use below to set random and permanent 
Replace your-interface-from-ifconfig with your interface name usually wlp3s0 wlan0, wlp0s0, etc.

ifconfig 
sudo ifconfig your-interface-from-ifconfig down
sudo apt -y install macchanger
sudo macchanger -r -b your-interface-from-ifconfig
sudo ifconfig your-interface-from-ifconfig up
rm -rf ~/.anydesk
sudo apt autopurge anydesk -y
sudo apt -y install anydesk
To make a shortcut to the script, sudo pico /sbin/resetanydesk and paste code above. change the wlan interface and save to /sbin/resetanydesk by pressing ctrl +o in pico then ctrl +x to exit, then run chmod +x /sbin/resetanydesk and run resetanydesk
MacOS:
Quit Anydesk Remove Anydesk from Applications folder
Open terminal type:
mv ~/.anydesk ~/.anydesk.old
rm -rf ~/.anydesk

sudo sh -c "curl https://raw.githubusercontent.com/shilch/macchanger/master/macchanger.sh > /usr/local/bin/macchanger && chmod +x /usr/local/bin/macchanger"

route -n get default | grep interface

sudo macchanger -r - p your-interface-name-from-previous-step
Download, install and Start Any desk (if it shows no id or the id is 0) then do a Logout from your MacOS user
Login again and start Anydesk
to revert changes rm -rf ~/.anydesk mv ~/.anydesk.old ~/.anydesk
it does not work on MacOS. The ID was changed but still get the license notification.

Pinging you also as you mentioned some linux support in your comment :), this seems to no longer work as per my above comment

otofoto · 2025-11-19T18:23:00Z

Goes into endless loop:

`[SC] OpenService FAILED 1060:

The specified service does not exist as an installed service.`

ROMANOFFCUR · 2025-11-19T21:17:02Z

@echo off
setlocal enableextensions
title Reset AnyDesk ID

:: 1. Verificar permisos de Administrador
reg query HKEY_USERS\S-1-5-19 >NUL || (
echo Por favor, ejecuta este archivo como Administrador.
pause
exit
)

chcp 437 >NUL

echo Deteniendo AnyDesk...
call :stop_any

echo Realizando copia de seguridad de configuracion de usuario...
:: Borra ID antigua
del /f "%ALLUSERSPROFILE%\AnyDesk\service.conf" 2>NUL
del /f "%APPDATA%\AnyDesk\service.conf" 2>NUL
del /f "%ALLUSERSPROFILE%\AnyDesk\system.conf" 2>NUL
del /f "%APPDATA%\AnyDesk\system.conf" 2>NUL

:: Backup de preferencias y miniaturas
copy /y "%APPDATA%\AnyDesk\user.conf" "%temp%" >NUL 2>NUL
rd /s /q "%temp%\thumbnails" 2>NUL
xcopy /c /e /h /r /y /i /k "%APPDATA%\AnyDesk\thumbnails" "%temp%\thumbnails" >NUL 2>NUL

:: Limpieza de archivos
del /f /a /q "%ALLUSERSPROFILE%\AnyDesk\ad_" 2>NUL
del /f /a /q "%APPDATA%\AnyDesk\ad_" 2>NUL

echo Reiniciando AnyDesk para generar nueva ID...
call :start_any

:: Espera a que se genere el archivo de sistema con la nueva ID
:lic
timeout /t 2 /nobreak >NUL
if exist "%ALLUSERSPROFILE%\AnyDesk\system.conf" (
type "%ALLUSERSPROFILE%\AnyDesk\system.conf" | find "ad.anynet.id=" >NUL
if !errorlevel! equ 0 goto restore
)
if exist "%APPDATA%\AnyDesk\system.conf" (
type "%APPDATA%\AnyDesk\system.conf" | find "ad.anynet.id=" >NUL
if !errorlevel! equ 0 goto restore
)
:: Si tarda mucho, salimos del bucle para no congelar
goto restore

:restore
echo Restaurando configuracion de usuario...
call :stop_any
move /y "%temp%\user.conf" "%APPDATA%\AnyDesk\user.conf" >NUL 2>NUL
xcopy /c /e /h /r /y /i /k "%temp%\thumbnails" "%APPDATA%\AnyDesk\thumbnails" >NUL 2>NUL
rd /s /q "%temp%\thumbnails" >NUL 2>NUL

echo Iniciando AnyDesk final...
call :start_any
echo *********
echo Completado.
echo(
pause
goto :eof

:: FUNCIONES

:start_any
:: Intenta iniciar servicio (si existe)
sc start AnyDesk >NUL 2>NUL
:: Busca ejecutables comunes
set AnyDesk1=%SystemDrive%\Program Files (x86)\AnyDesk\AnyDesk.exe
set AnyDesk2=%SystemDrive%\Program Files\AnyDesk\AnyDesk.exe
if exist "%AnyDesk1%" start "" "%AnyDesk1%"
if exist "%AnyDesk2%" start "" "%AnyDesk2%"
exit /b

:stop_any
:: Intenta detener servicio (sin bucle infinito)
sc stop AnyDesk >NUL 2>NUL
:: Mata el proceso forzosamente por si es portable
taskkill /f /im "AnyDesk.exe" >NUL 2>NUL
exit /b

ROMANOFFCUR · 2025-11-19T21:18:15Z

This file worked for me

	@echo off & setlocal enableextensions
	title Reset AnyDesk
	reg query HKEY_USERS\S-1-5-19 >NUL \|\| (echo Please Run as administrator.& pause >NUL&exit)
	chcp 437
	call :stop_any
	del /f "%ALLUSERSPROFILE%\AnyDesk\service.conf"
	del /f "%APPDATA%\AnyDesk\service.conf"
	copy /y "%APPDATA%\AnyDesk\user.conf" "%temp%\"
	rd /s /q "%temp%\thumbnails" 2>NUL
	xcopy /c /e /h /r /y /i /k "%APPDATA%\AnyDesk\thumbnails" "%temp%\thumbnails"
	del /f /a /q "%ALLUSERSPROFILE%\AnyDesk\*"
	del /f /a /q "%APPDATA%\AnyDesk\*"
	call :start_any
	:lic
	type "%ALLUSERSPROFILE%\AnyDesk\system.conf" \| find "ad.anynet.id=" \|\| goto lic
	call :stop_any
	move /y "%temp%\user.conf" "%APPDATA%\AnyDesk\user.conf"
	xcopy /c /e /h /r /y /i /k "%temp%\thumbnails" "%APPDATA%\AnyDesk\thumbnails"
	rd /s /q "%temp%\thumbnails"
	call :start_any
	echo *********
	echo Completed.
	echo(
	goto :eof

	:start_any
	sc start AnyDesk
	sc start AnyDesk
	if %errorlevel% neq 1056 goto start_any
	set AnyDesk1=%SystemDrive%\Program Files (x86)\AnyDesk\AnyDesk.exe
	set AnyDesk2=%SystemDrive%\Program Files\AnyDesk\AnyDesk.exe
	if exist "%AnyDesk1%" start "" "%AnyDesk1%"
	if exist "%AnyDesk2%" start "" "%AnyDesk2%"
	exit /b

	:stop_any
	sc stop AnyDesk
	sc stop AnyDesk
	if %errorlevel% neq 1062 goto stop_any
	taskkill /f /im "AnyDesk.exe"
	exit /b

janasco/AnyDesk-Reset.cmd

info-ticoworks commented Jul 4, 2025

Uh oh!

AR-69 commented Jul 9, 2025

Uh oh!

itikumyap commented Jul 22, 2025

Uh oh!

melodiazz commented Jul 22, 2025

Uh oh!

digitalonellc commented Jul 22, 2025

Uh oh!

TechMorgan commented Jul 24, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

ugurkan-syntonym commented Aug 13, 2025

Uh oh!

digitalonellc commented Aug 13, 2025 via email • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

digitalonellc commented Aug 13, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

digitalonellc commented Aug 13, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

GERENCIALG7 commented Aug 14, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

edersilvago commented Aug 19, 2025

Uh oh!

GERENCIALG7 commented Aug 19, 2025

Uh oh!

edersilvago commented Aug 21, 2025

Uh oh!

ghost commented Aug 25, 2025

Uh oh!

bruak commented Aug 27, 2025

Uh oh!

JonnyMonk3y commented Oct 7, 2025

Uh oh!

dashpops commented Oct 27, 2025

Uh oh!

dashpops commented Oct 27, 2025

Uh oh!

otofoto commented Nov 19, 2025

Uh oh!

ROMANOFFCUR commented Nov 19, 2025

Uh oh!

ROMANOFFCUR commented Nov 19, 2025

Uh oh!

TechMorgan commented Jul 24, 2025 •

edited

Loading

digitalonellc commented Aug 13, 2025 via email •

edited

Loading

digitalonellc commented Aug 13, 2025 •

edited

Loading

digitalonellc commented Aug 13, 2025 •

edited

Loading

GERENCIALG7 commented Aug 14, 2025 •

edited

Loading