Skip to content

Instantly share code, notes, and snippets.

@jboone

jboone/LPC43xx.svd.patch

Created August 14, 2017 01:01
Show Gist options
  • Save jboone/2b9bbca59a7eeff0b1a2bc41ef670930 to your computer and use it in GitHub Desktop.
Save jboone/2b9bbca59a7eeff0b1a2bc41ef670930 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
LPC43xx.svd.patch
--- LPC43xx.svd.orig 2017-08-03 20:37:12.501824574 -0700
+++ LPC43xx.svd 2017-08-03 22:25:24.933731557 -0700
@@ -142,82 +142,82 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>RISING_EDGES_ON_INPU</name>
+ <name>INPUT_0_RISING_EDGE</name>
<description>Rising edges on input 0.</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
- <name>FALLING_EDGES_ON_INP</name>
+ <name>INPUT_0_FALLING_EDGE</name>
<description>Falling edges on input 0.</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
- <name>RISING_EDGES_ON_INPU</name>
+ <name>INPUT_1_RISING_EDGE</name>
<description>Rising edges on input 1.</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
- <name>FALLING_EDGES_ON_INP</name>
+ <name>INPUT_1_FALLING_EDGE</name>
<description>Falling edges on input 1.</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
- <name>RISING_EDGES_ON_INPU</name>
+ <name>INPUT_2_RISING_EDGE</name>
<description>Rising edges on input 2.</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
- <name>FALLING_EDGES_ON_INP</name>
+ <name>INPUT_2_FALLING_EDGE</name>
<description>Falling edges on input 2.</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
- <name>RISING_EDGES_ON_INPU</name>
+ <name>INPUT_3_RISING_EDGE</name>
<description>Rising edges on input 3.</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
- <name>FALLING_EDGES_ON_INP</name>
+ <name>INPUT_3_FALLING_EDGE</name>
<description>Falling edges on input 3.</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
- <name>RISING_EDGES_ON_INPU</name>
+ <name>INPUT_4_RISING_EDGE</name>
<description>Rising edges on input 4.</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
- <name>FALLING_EDGES_ON_INP</name>
+ <name>INPUT_4_FALLING_EDGE</name>
<description>Falling edges on input 4.</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
- <name>RISING_EDGES_ON_INPU</name>
+ <name>INPUT_5_RISING_EDGE</name>
<description>Rising edges on input 5.</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
- <name>FALLING_EDGES_ON_INP</name>
+ <name>INPUT_5_FALLING_EDGE</name>
<description>Falling edges on input 5.</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
- <name>RISING_EDGES_ON_INPU</name>
+ <name>INPUT_6_RISING_EDGE</name>
<description>Rising edges on input 6.</description>
<value>0xC</value>
</enumeratedValue>
<enumeratedValue>
- <name>FALLING_EDGES_ON_INP</name>
+ <name>INPUT_6_FALLING_EDGE</name>
<description>Falling edges on input 6.</description>
<value>0xD</value>
</enumeratedValue>
<enumeratedValue>
- <name>RISING_EDGES_ON_INPU</name>
+ <name>INPUT_7_RISING_EDGE</name>
<description>Rising edges on input 7.</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
- <name>FALLING_EDGES_ON_INP</name>
+ <name>INPUT_7_FALLING_EDGE</name>
<description>Falling edges on input 7.</description>
<value>0xF</value>
</enumeratedValue>
@@ -3678,7 +3678,7 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLED__DEFAULT_</name>
+ <name>DISABLED</name>
<description>Disabled (default). Disabling the DMA Controller reduces power consumption.</description>
<value>0</value>
</enumeratedValue>
@@ -4157,12 +4157,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>THE_DESTINATION_ADDR</name>
+ <name>AFTER_XFER_NO_INC</name>
<description>The destination address is not incremented after each transfer.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>THE_DESTINATION_ADDR</name>
+ <name>AFTER_XFER_INC</name>
<description>The destination address is incremented after each transfer.</description>
<value>1</value>
</enumeratedValue>
@@ -4229,12 +4229,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>THE_TERMINAL_COUNT_I</name>
+ <name>TC_INT_DISABLED</name>
<description>The terminal count interrupt is disabled.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>THE_TERMINAL_COUNT_I</name>
+ <name>TC_INT_ENABLED</name>
<description>The terminal count interrupt is enabled.</description>
<value>1</value>
</enumeratedValue>
@@ -4278,82 +4278,82 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>SOURCE_EQ_SPIFI</name>
+ <name>SPIFI_SCTMATCH2_SGPIO14_TIMER3MATCH1</name>
<description>Source = SPIFI</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_TIMER_0_MAT</name>
+ <name>TIMER0MATCH0_USART0TX_AESIN</name>
<description>Source = Timer 0 match 0/UART0 transmit</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_TIMER_0_MAT</name>
+ <name>TIMER0MATCH1_USART0RX_AESOUT</name>
<description>Source = Timer 0 match 1/UART0 receive</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_TIMER_1_MAT</name>
+ <name>TIMER1MATCH0_UART1TX_I2S1DMAREQ1_SSP1TX</name>
<description>Source = Timer 1 match 0/UART1 transmit</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_TIMER_1_MAT</name>
+ <name>TIMER1MATCH1_UART1RX_I2S1DMAREQ2_SSP1RX</name>
<description>Source = Timer 1 match 1/UART 1 receive</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_TIMER_2_MAT</name>
+ <name>TIMER2MATCH0_USART2TX_SSP1TX_SGPIO15</name>
<description>Source = Timer 2 match 0/UART 2 transmit</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_TIMER_2_MAT</name>
+ <name>TIMER2MATCH1_USART2RX_SSP1RX_SGPIO14</name>
<description>Source = Timer 2 match 1/UART 2 receive</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_TIMER_3_MAT</name>
+ <name>TIMER3MATCH0_UART3TX_SCTDMAREQ0_ADCHSWR</name>
<description>Source = Timer 3 match 0/UART3 transmit/SCT DMA request 0</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_TIMER_3_MAT</name>
+ <name>TIMER3MATCH1_UART3RX_SCTDMAREQ1_ADCHSRD</name>
<description>Source = Timer 3 match 1/UART3 receive/SCT DMA request 1</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_SSP0_RECEIV</name>
+ <name>SSP0RX_I2S0DMAREQ1_SCTDMAREQ1</name>
<description>Source = SSP0 receive/I2S channel 0</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_SSP0_TRANSM</name>
+ <name>SSP0TX_I2S0DMAREQ2_SCTDMAREQ0</name>
<description>Source = SSP0 transmit/I2S channel 1</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_SSP1_RECEIV</name>
+ <name>SSP1RX_SGPIO14_USART0TX</name>
<description>Source = SSP1 receive</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_SSP1_TRANSM</name>
+ <name>SSP1TX_SGPIO15_USART0RX</name>
<description>Source = SSP1 transmit</description>
<value>0xC</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_ADC0</name>
+ <name>ADC0_AESIN_SSP1RX_USART3RX</name>
<description>Source = ADC0</description>
<value>0xD</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_ADC1</name>
+ <name>ADC1_AESOUT_SSP1TX_USART3TX</name>
<description>Source = ADC1</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_EQ_DAC</name>
+ <name>DAC_SCTMATCH3_SGPIO15_TIMER3MATCH0</name>
<description>Source = DAC</description>
<value>0xF</value>
</enumeratedValue>
@@ -4366,82 +4366,82 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DESTINATION_EQ_SPIFI</name>
+ <name>SPIFI_SCTMATCH2_SGPIO14_TIMER3MATCH1</name>
<description>Destination = SPIFI</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_TIMER_</name>
+ <name>TIMER0MATCH0_UART0TX_AESIN</name>
<description>Destination = Timer 0 match 0/UART0 transmit</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_TIMER_</name>
+ <name>TIMER0MATCH1_UART0RX_AESOUT</name>
<description>Destination = Timer 0 match 1/UART0 receive</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_TIMER_</name>
+ <name>TIMER1MATCH0_UART1TX_I2S1DMAREQ1_SSP1TX</name>
<description>Destination = Timer 1 match 0/UART1 transmit</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_TIMER_</name>
+ <name>TIMER1MATCH1_UART1RX_I2S1DMAREQ2_SSP1RX</name>
<description>Destination = Timer 1 match 1/UART 1 receive</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_TIMER_</name>
+ <name>TIMER2MATCH0_USART2TX_SSP1TX_SGPIO15</name>
<description>Destination = Timer 2 match 0/UART 2 transmit</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_TIMER_</name>
+ <name>TIMER2MATCH1_USART2RX_SSP1RX_SGPIO14</name>
<description>Destination = Timer 2 match 1/UART 2 receive</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_TIMER_</name>
+ <name>TIMER3MATCH0_UART3TX_SCTDMAREQ0_ADCHSWR</name>
<description>Destination = Timer 3 match 0/UART3 transmit/SCT DMA request 0</description>
<value>0x7</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_TIMER_</name>
+ <name>TIMER3MATCH1_UART3RX_SCTDMAREQ1_ADCHSRD</name>
<description>Destination = Timer 3 match 1/UART3 receive/SCT DMA request 1</description>
<value>0x8</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_SSP0_R</name>
+ <name>SSP0RX_I2S0DMAREQ1_SCTDMAREQ1</name>
<description>Destination = SSP0 receive/I2S channel 0</description>
<value>0x9</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_SSP0_T</name>
+ <name>SSP0TX_I2S0DMAREQ2_SCTDMAREQ0</name>
<description>Destination = SSP0 transmit/I2S channel 1</description>
<value>0xA</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_SSP1_R</name>
+ <name>SSP1RX_SGPIO14_USART0TX</name>
<description>Destination = SSP1 receive</description>
<value>0xB</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_SSP1_T</name>
+ <name>SSP1TX_SGPIO15_USART0RX</name>
<description>Destination = SSP1 transmit</description>
<value>0xC</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_ADC0</name>
+ <name>ADC0_AESIN_SSP1RX_USART3RX</name>
<description>Destination = ADC0</description>
<value>0xD</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_ADC1</name>
+ <name>ADC1_AESOUT_SSP1TX_USART3TX</name>
<description>Destination = ADC1</description>
<value>0xE</value>
</enumeratedValue>
<enumeratedValue>
- <name>DESTINATION_EQ_DAC</name>
+ <name>DAC_SCTMATCH3_SGPIO15_TIMER3MATCH0</name>
<description>Destination = DAC</description>
<value>0xF</value>
</enumeratedValue>
@@ -4454,42 +4454,42 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>MEMORY_TO_MEMORY</name>
+ <name>MEMORY_TO_MEMORY_DMA_CTRL</name>
<description>Memory to memory (DMA control)</description>
<value>0x0</value>
</enumeratedValue>
<enumeratedValue>
- <name>MEMORY_TO_PERIPHERAL</name>
+ <name>MEMORY_TO_PERIPHERAL_DMA_CTRL</name>
<description>Memory to peripheral (DMA control)</description>
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
- <name>PERIPHERAL_TO_MEMORY</name>
+ <name>PERIPHERAL_TO_MEMORY_DMA_CTRL</name>
<description>Peripheral to memory (DMA control)</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_PERIPHERAL_TO</name>
+ <name>PERIPHERAL_TO_PERIPHERAL_DMA_CTRL</name>
<description>Source peripheral to destination peripheral (DMA control)</description>
<value>0x3</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_PERIPHERAL_TO</name>
+ <name>PERIPHERAL_TO_PERIPHERAL_CTRL</name>
<description>Source peripheral to destination peripheral (destination control)</description>
<value>0x4</value>
</enumeratedValue>
<enumeratedValue>
- <name>MEMORY_TO_PERIPHERAL</name>
+ <name>MEMORY_TO_PERIPHERAL_CTRL</name>
<description>Memory to peripheral (peripheral control)</description>
<value>0x5</value>
</enumeratedValue>
<enumeratedValue>
- <name>PERIPHERAL_TO_MEMORY</name>
+ <name>PERIPHERAL_CTRL_TO_MEMORY</name>
<description>Peripheral to memory (peripheral control)</description>
<value>0x6</value>
</enumeratedValue>
<enumeratedValue>
- <name>SOURCE_PERIPHERAL_TO</name>
+ <name>PERIPHERAL_CTRL_TO_PERIPHERAL</name>
<description>Source peripheral to destination peripheral (source control)</description>
<value>0x7</value>
</enumeratedValue>
@@ -8777,7 +8777,7 @@
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>DISABLED</name>
+ <name>ENABLED</name>
<description>The periodic schedule status is enabled.</description>
<value>1</value>
</enumeratedValue>
@@ -8795,7 +8795,7 @@
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>DISABLED</name>
+ <name>ENABLED</name>
<description>Asynchronous schedule status is enabled.</description>
<value>1</value>
</enumeratedValue>
@@ -9461,12 +9461,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DEVICE_NOT_ATTACHED_</name>
+ <name>DEVICE_NOT_ATTACHED</name>
<description>Device not attached A zero indicates that the device did not attach successfully or was forcibly disconnected by the software writing a zero to the Run bit in the USBCMD register. It does not state the device being disconnected or suspended.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>DEVICE_ATTACHED__A_</name>
+ <name>DEVICE_ATTACHED</name>
<description>Device attached. A one indicates that the device successfully attached and is operating in either high-speed mode or full-speed mode as indicated by the High Speed Port bit in this register.</description>
<value>1</value>
</enumeratedValue>
@@ -12960,12 +12960,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DEVICE_NOT_ATTACHED_</name>
+ <name>DEVICE_NOT_ATTACHED</name>
<description>Device not attached A zero indicates that the device did not attach successfully or was forcibly disconnected by the software writing a zero to the Run bit in the USBCMD register. It does not state the device being disconnected or suspended.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>DEVICE_ATTACHED__A_</name>
+ <name>DEVICE_ATTACHED</name>
<description>Device attached. A one indicates that the device successfully attached and is operating in either high-speed mode or full-speed mode as indicated by the High Speed Port bit in this register.</description>
<value>1</value>
</enumeratedValue>
@@ -17687,7 +17687,7 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>INPUT_TO_THE_EVENT_R</name>
+ <name>INPUT_TO_THE_EVENT_ROUTER</name>
<description>Input to the event router.</description>
<value>0x0</value>
</enumeratedValue>
@@ -17702,7 +17702,7 @@
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
- <name>INPUT_TO_THE_EVENT_R</name>
+ <name>INPUT_TO_THE_EVENT_ROUTER_3</name>
<description>Input to the event router.</description>
<value>0x3</value>
</enumeratedValue>
@@ -17715,7 +17715,7 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>INPUT_TO_EVENT_ROUTE</name>
+ <name>INPUT_TO_EVENT_ROUTER</name>
<description>Input to event router.</description>
<value>0x0</value>
</enumeratedValue>
@@ -17730,7 +17730,7 @@
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
- <name>INPUT_TO_EVENT_ROUTE</name>
+ <name>INPUT_TO_EVENT_ROUTE_3</name>
<description>Input to event router.</description>
<value>0x3</value>
</enumeratedValue>
@@ -37582,12 +37582,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>BREAK_INTERRUPT_STAT</name>
+ <name>INACTIVE</name>
<description>Break interrupt status is inactive.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>BREAK_INTERRUPT_STAT</name>
+ <name>ACTIVE</name>
<description>Break interrupt status is active.</description>
<value>1</value>
</enumeratedValue>
@@ -40017,10 +40017,7 @@
</register>
<register>
- <dim>3</dim>
- <dimIncrement>0x4</dimIncrement>
- <dimIndex>18-20</dimIndex>
- <name>SFSP1_%s</name>
+ <name>SFSP1_18</name>
<description>Pin configuration register for pins P1</description>
<addressOffset>0x0C8</addressOffset>
<access>read-write</access>
@@ -40174,10 +40171,315 @@
</fields>
</register>
<register>
- <dim>3</dim>
- <dimIncrement>0x4</dimIncrement>
- <dimIndex>0-2</dimIndex>
- <name>SFSP2_%s</name>
+ <name>SFSP1_19</name>
+ <description>Pin configuration register for pins P1</description>
+ <addressOffset>0x0CC</addressOffset>
+ <access>read-write</access>
+ <resetValue>0</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ <fields>
+ <field>
+ <name>MODE</name>
+ <description>Select pin function.</description>
+ <bitRange>[2:0]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>FUNCTION_0_DEFAULT</name>
+ <description>Function 0 (default)</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_1</name>
+ <description>Function 1</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_2</name>
+ <description>Function 2</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_3</name>
+ <description>Function 3</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_4</name>
+ <description>Function 4</description>
+ <value>0x4</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_5</name>
+ <description>Function 5</description>
+ <value>0x5</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_6</name>
+ <description>Function 6</description>
+ <value>0x6</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_7</name>
+ <description>Function 7</description>
+ <value>0x7</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPD</name>
+ <description>Enable pull-down resistor at pad.</description>
+ <bitRange>[3:3]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_PULL_DOWN</name>
+ <description>Disable pull-down.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_PULL_DOWN</name>
+ <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPUN</name>
+ <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description>
+ <bitRange>[4:4]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_PULL_UP</name>
+ <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_PULL_UP</name>
+ <description>Disable pull-up.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EHS</name>
+ <description>Select Slew rate.</description>
+ <bitRange>[5:5]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>SLOW_LOW_NOISE_WITH</name>
+ <description>Slow (low noise with medium speed)</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FAST_MEDIUM_NOISE_W</name>
+ <description>Fast (medium noise with fast speed)</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EZI</name>
+ <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description>
+ <bitRange>[6:6]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_BUFFER</name>
+ <description>Disable input buffer</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_BUFFER</name>
+ <description>Enable input buffer</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>ZIF</name>
+ <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description>
+ <bitRange>[7:7]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_GLITCH</name>
+ <description>Enable input glitch filter</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_GLITCH</name>
+ <description>Disable input glitch filter</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[31:8]</bitRange>
+
+ </field>
+ </fields>
+ </register>
+ <register>
+ <name>SFSP1_20</name>
+ <description>Pin configuration register for pins P1</description>
+ <addressOffset>0x0D0</addressOffset>
+ <access>read-write</access>
+ <resetValue>0</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ <fields>
+ <field>
+ <name>MODE</name>
+ <description>Select pin function.</description>
+ <bitRange>[2:0]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>FUNCTION_0_DEFAULT</name>
+ <description>Function 0 (default)</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_1</name>
+ <description>Function 1</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_2</name>
+ <description>Function 2</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_3</name>
+ <description>Function 3</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_4</name>
+ <description>Function 4</description>
+ <value>0x4</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_5</name>
+ <description>Function 5</description>
+ <value>0x5</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_6</name>
+ <description>Function 6</description>
+ <value>0x6</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_7</name>
+ <description>Function 7</description>
+ <value>0x7</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPD</name>
+ <description>Enable pull-down resistor at pad.</description>
+ <bitRange>[3:3]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_PULL_DOWN</name>
+ <description>Disable pull-down.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_PULL_DOWN</name>
+ <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPUN</name>
+ <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description>
+ <bitRange>[4:4]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_PULL_UP</name>
+ <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_PULL_UP</name>
+ <description>Disable pull-up.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EHS</name>
+ <description>Select Slew rate.</description>
+ <bitRange>[5:5]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>SLOW_LOW_NOISE_WITH</name>
+ <description>Slow (low noise with medium speed)</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FAST_MEDIUM_NOISE_W</name>
+ <description>Fast (medium noise with fast speed)</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EZI</name>
+ <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description>
+ <bitRange>[6:6]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_BUFFER</name>
+ <description>Disable input buffer</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_BUFFER</name>
+ <description>Enable input buffer</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>ZIF</name>
+ <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description>
+ <bitRange>[7:7]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_GLITCH</name>
+ <description>Enable input glitch filter</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_GLITCH</name>
+ <description>Disable input glitch filter</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[31:8]</bitRange>
+
+ </field>
+ </fields>
+ </register>
+ <register>
+ <name>SFSP2_0</name>
<description>Pin configuration register for pins P2</description>
<addressOffset>0x100</addressOffset>
<access>read-write</access>
@@ -40331,10 +40633,315 @@
</fields>
</register>
<register>
- <dim>3</dim>
- <dimIncrement>0x4</dimIncrement>
- <dimIndex>3-5</dimIndex>
- <name>SFSP2_%s</name>
+ <name>SFSP2_1</name>
+ <description>Pin configuration register for pins P2</description>
+ <addressOffset>0x104</addressOffset>
+ <access>read-write</access>
+ <resetValue>0</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ <fields>
+ <field>
+ <name>MODE</name>
+ <description>Select pin function.</description>
+ <bitRange>[2:0]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>FUNCTION_0_DEFAULT</name>
+ <description>Function 0 (default)</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_1</name>
+ <description>Function 1</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_2</name>
+ <description>Function 2</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_3</name>
+ <description>Function 3</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_4</name>
+ <description>Function 4</description>
+ <value>0x4</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_5</name>
+ <description>Function 5</description>
+ <value>0x5</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_6</name>
+ <description>Function 6</description>
+ <value>0x6</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_7</name>
+ <description>Function 7</description>
+ <value>0x7</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPD</name>
+ <description>Enable pull-down resistor at pad.</description>
+ <bitRange>[3:3]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_PULL_DOWN</name>
+ <description>Disable pull-down.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_PULL_DOWN</name>
+ <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPUN</name>
+ <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description>
+ <bitRange>[4:4]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_PULL_UP</name>
+ <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_PULL_UP</name>
+ <description>Disable pull-up.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EHS</name>
+ <description>Select Slew rate.</description>
+ <bitRange>[5:5]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>SLOW_LOW_NOISE_WITH</name>
+ <description>Slow (low noise with medium speed)</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FAST_MEDIUM_NOISE_W</name>
+ <description>Fast (medium noise with fast speed)</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EZI</name>
+ <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description>
+ <bitRange>[6:6]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_BUFFER</name>
+ <description>Disable input buffer</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_BUFFER</name>
+ <description>Enable input buffer</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>ZIF</name>
+ <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description>
+ <bitRange>[7:7]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_GLITCH</name>
+ <description>Enable input glitch filter</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_GLITCH</name>
+ <description>Disable input glitch filter</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[31:8]</bitRange>
+
+ </field>
+ </fields>
+ </register>
+ <register>
+ <name>SFSP2_2</name>
+ <description>Pin configuration register for pins P2</description>
+ <addressOffset>0x108</addressOffset>
+ <access>read-write</access>
+ <resetValue>0</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ <fields>
+ <field>
+ <name>MODE</name>
+ <description>Select pin function.</description>
+ <bitRange>[2:0]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>FUNCTION_0_DEFAULT</name>
+ <description>Function 0 (default)</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_1</name>
+ <description>Function 1</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_2</name>
+ <description>Function 2</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_3</name>
+ <description>Function 3</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_4</name>
+ <description>Function 4</description>
+ <value>0x4</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_5</name>
+ <description>Function 5</description>
+ <value>0x5</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_6</name>
+ <description>Function 6</description>
+ <value>0x6</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_7</name>
+ <description>Function 7</description>
+ <value>0x7</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPD</name>
+ <description>Enable pull-down resistor at pad.</description>
+ <bitRange>[3:3]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_PULL_DOWN</name>
+ <description>Disable pull-down.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_PULL_DOWN</name>
+ <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPUN</name>
+ <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description>
+ <bitRange>[4:4]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_PULL_UP</name>
+ <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_PULL_UP</name>
+ <description>Disable pull-up.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EHS</name>
+ <description>Select Slew rate.</description>
+ <bitRange>[5:5]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>SLOW_LOW_NOISE_WITH</name>
+ <description>Slow (low noise with medium speed)</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FAST_MEDIUM_NOISE_W</name>
+ <description>Fast (medium noise with fast speed)</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EZI</name>
+ <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description>
+ <bitRange>[6:6]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_BUFFER</name>
+ <description>Disable input buffer</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_BUFFER</name>
+ <description>Enable input buffer</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>ZIF</name>
+ <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description>
+ <bitRange>[7:7]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_GLITCH</name>
+ <description>Enable input glitch filter</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_GLITCH</name>
+ <description>Disable input glitch filter</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[31:8]</bitRange>
+
+ </field>
+ </fields>
+ </register>
+ <register>
+ <name>SFSP2_3</name>
<description>Pin configuration register for pins P2</description>
<addressOffset>0x10C</addressOffset>
<access>read-write</access>
@@ -40504,6 +41111,346 @@
</fields>
</register>
<register>
+ <name>SFSP2_4</name>
+ <description>Pin configuration register for pins P2</description>
+ <addressOffset>0x110</addressOffset>
+ <access>read-write</access>
+ <resetValue>0</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ <fields>
+ <field>
+ <name>MODE</name>
+ <description>Select pin function.</description>
+ <bitRange>[2:0]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>FUNCTION_0_DEFAULT</name>
+ <description>Function 0 (default)</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_1</name>
+ <description>Function 1</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_2</name>
+ <description>Function 2</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_3</name>
+ <description>Function 3</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_4</name>
+ <description>Function 4</description>
+ <value>0x4</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_5</name>
+ <description>Function 5</description>
+ <value>0x5</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_6</name>
+ <description>Function 6</description>
+ <value>0x6</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_7</name>
+ <description>Function 7</description>
+ <value>0x7</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPD</name>
+ <description>Enable pull-down resistor at pad.</description>
+ <bitRange>[3:3]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_PULL_DOWN</name>
+ <description>Disable pull-down.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_PULL_DOWN</name>
+ <description>Enable pull-down. Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPUN</name>
+ <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description>
+ <bitRange>[4:4]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_PULL_UP</name>
+ <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_PULL_UP</name>
+ <description>Disable pull-up</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[5:5]</bitRange>
+
+ </field>
+ <field>
+ <name>EZI</name>
+ <description>Input buffer enable. The input buffer is disabled by default at reset but must be enabled to transfer data from the I/O buffer to the pad.</description>
+ <bitRange>[6:6]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_BUFFER</name>
+ <description>Disable input buffer</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_BUFFER</name>
+ <description>Enable input buffer</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>ZIF</name>
+ <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description>
+ <bitRange>[7:7]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_GLITCH</name>
+ <description>Enable input glitch filter</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_GLITCH</name>
+ <description>Disable input glitch filter</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EHD</name>
+ <description>Select drive strength.</description>
+ <bitRange>[9:8]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>NORMAL_DRIVE_4_MA_D</name>
+ <description>Normal-drive: 4 mA drive strength</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>MEDIUM_DRIVE_8_MA_D</name>
+ <description>Medium-drive: 8 mA drive strength</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>HIGH_DRIVE_14_MA_DR</name>
+ <description>High-drive: 14 mA drive strength</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ULTRA_HIGH_DRIVE_20</name>
+ <description>Ultra high-drive: 20 mA drive strength</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[31:10]</bitRange>
+
+ </field>
+ </fields>
+ </register>
+ <register>
+ <name>SFSP2_5</name>
+ <description>Pin configuration register for pins P2</description>
+ <addressOffset>0x114</addressOffset>
+ <access>read-write</access>
+ <resetValue>0</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ <fields>
+ <field>
+ <name>MODE</name>
+ <description>Select pin function.</description>
+ <bitRange>[2:0]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>FUNCTION_0_DEFAULT</name>
+ <description>Function 0 (default)</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_1</name>
+ <description>Function 1</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_2</name>
+ <description>Function 2</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_3</name>
+ <description>Function 3</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_4</name>
+ <description>Function 4</description>
+ <value>0x4</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_5</name>
+ <description>Function 5</description>
+ <value>0x5</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_6</name>
+ <description>Function 6</description>
+ <value>0x6</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_7</name>
+ <description>Function 7</description>
+ <value>0x7</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPD</name>
+ <description>Enable pull-down resistor at pad.</description>
+ <bitRange>[3:3]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_PULL_DOWN</name>
+ <description>Disable pull-down.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_PULL_DOWN</name>
+ <description>Enable pull-down. Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPUN</name>
+ <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description>
+ <bitRange>[4:4]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_PULL_UP</name>
+ <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_PULL_UP</name>
+ <description>Disable pull-up</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[5:5]</bitRange>
+
+ </field>
+ <field>
+ <name>EZI</name>
+ <description>Input buffer enable. The input buffer is disabled by default at reset but must be enabled to transfer data from the I/O buffer to the pad.</description>
+ <bitRange>[6:6]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_BUFFER</name>
+ <description>Disable input buffer</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_BUFFER</name>
+ <description>Enable input buffer</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>ZIF</name>
+ <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description>
+ <bitRange>[7:7]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_GLITCH</name>
+ <description>Enable input glitch filter</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_GLITCH</name>
+ <description>Disable input glitch filter</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EHD</name>
+ <description>Select drive strength.</description>
+ <bitRange>[9:8]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>NORMAL_DRIVE_4_MA_D</name>
+ <description>Normal-drive: 4 mA drive strength</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>MEDIUM_DRIVE_8_MA_D</name>
+ <description>Medium-drive: 8 mA drive strength</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>HIGH_DRIVE_14_MA_DR</name>
+ <description>High-drive: 14 mA drive strength</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ULTRA_HIGH_DRIVE_20</name>
+ <description>Ultra high-drive: 20 mA drive strength</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[31:10]</bitRange>
+
+ </field>
+ </fields>
+ </register>
+ <register>
<dim>7</dim>
<dimIncrement>0x4</dimIncrement>
<dimIndex>6-12</dimIndex>
@@ -40661,10 +41608,7 @@
</fields>
</register>
<register>
- <dim>3</dim>
- <dimIncrement>0x4</dimIncrement>
- <dimIndex>0-2</dimIndex>
- <name>SFSP3_%s</name>
+ <name>SFSP3_0</name>
<description>Pin configuration register for pins P3</description>
<addressOffset>0x180</addressOffset>
<access>read-write</access>
@@ -40818,6 +41762,314 @@
</fields>
</register>
<register>
+ <name>SFSP3_1</name>
+ <description>Pin configuration register for pins P3</description>
+ <addressOffset>0x184</addressOffset>
+ <access>read-write</access>
+ <resetValue>0</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ <fields>
+ <field>
+ <name>MODE</name>
+ <description>Select pin function.</description>
+ <bitRange>[2:0]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>FUNCTION_0_DEFAULT</name>
+ <description>Function 0 (default)</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_1</name>
+ <description>Function 1</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_2</name>
+ <description>Function 2</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_3</name>
+ <description>Function 3</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_4</name>
+ <description>Function 4</description>
+ <value>0x4</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_5</name>
+ <description>Function 5</description>
+ <value>0x5</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_6</name>
+ <description>Function 6</description>
+ <value>0x6</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_7</name>
+ <description>Function 7</description>
+ <value>0x7</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPD</name>
+ <description>Enable pull-down resistor at pad.</description>
+ <bitRange>[3:3]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_PULL_DOWN</name>
+ <description>Disable pull-down.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_PULL_DOWN</name>
+ <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPUN</name>
+ <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description>
+ <bitRange>[4:4]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_PULL_UP</name>
+ <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_PULL_UP</name>
+ <description>Disable pull-up.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EHS</name>
+ <description>Select Slew rate.</description>
+ <bitRange>[5:5]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>SLOW_LOW_NOISE_WITH</name>
+ <description>Slow (low noise with medium speed)</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FAST_MEDIUM_NOISE_W</name>
+ <description>Fast (medium noise with fast speed)</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EZI</name>
+ <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description>
+ <bitRange>[6:6]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_BUFFER</name>
+ <description>Disable input buffer</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_BUFFER</name>
+ <description>Enable input buffer</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>ZIF</name>
+ <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description>
+ <bitRange>[7:7]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_GLITCH</name>
+ <description>Enable input glitch filter</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_GLITCH</name>
+ <description>Disable input glitch filter</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[31:8]</bitRange>
+
+ </field>
+ </fields>
+ </register>
+ <register>
+ <name>SFSP3_2</name>
+ <description>Pin configuration register for pins P3</description>
+ <addressOffset>0x188</addressOffset>
+ <access>read-write</access>
+ <resetValue>0</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ <fields>
+ <field>
+ <name>MODE</name>
+ <description>Select pin function.</description>
+ <bitRange>[2:0]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>FUNCTION_0_DEFAULT</name>
+ <description>Function 0 (default)</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_1</name>
+ <description>Function 1</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_2</name>
+ <description>Function 2</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_3</name>
+ <description>Function 3</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_4</name>
+ <description>Function 4</description>
+ <value>0x4</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_5</name>
+ <description>Function 5</description>
+ <value>0x5</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_6</name>
+ <description>Function 6</description>
+ <value>0x6</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_7</name>
+ <description>Function 7</description>
+ <value>0x7</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPD</name>
+ <description>Enable pull-down resistor at pad.</description>
+ <bitRange>[3:3]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_PULL_DOWN</name>
+ <description>Disable pull-down.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_PULL_DOWN</name>
+ <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPUN</name>
+ <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description>
+ <bitRange>[4:4]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_PULL_UP</name>
+ <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_PULL_UP</name>
+ <description>Disable pull-up.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EHS</name>
+ <description>Select Slew rate.</description>
+ <bitRange>[5:5]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>SLOW_LOW_NOISE_WITH</name>
+ <description>Slow (low noise with medium speed)</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FAST_MEDIUM_NOISE_W</name>
+ <description>Fast (medium noise with fast speed)</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EZI</name>
+ <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description>
+ <bitRange>[6:6]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_BUFFER</name>
+ <description>Disable input buffer</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_BUFFER</name>
+ <description>Enable input buffer</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>ZIF</name>
+ <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description>
+ <bitRange>[7:7]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_GLITCH</name>
+ <description>Enable input glitch filter</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_GLITCH</name>
+ <description>Disable input glitch filter</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[31:8]</bitRange>
+
+ </field>
+ </fields>
+ </register>
+ <register>
<name>SFSP3_3</name>
<description>Pin configuration register for pins P3</description>
@@ -41761,10 +43013,7 @@
</fields>
</register>
<register>
- <dim>3</dim>
- <dimIncrement>0x4</dimIncrement>
- <dimIndex>0-2</dimIndex>
- <name>SFSP8_%s</name>
+ <name>SFSP8_0</name>
<description>Pin configuration register for pins P8</description>
<addressOffset>0x400</addressOffset>
<access>read-write</access>
@@ -41856,19 +43105,176 @@
</enumeratedValues>
</field>
<field>
- <name>EHS</name>
- <description>Select Slew rate.</description>
+ <name>RESERVED</name>
+ <description>Reserved</description>
<bitRange>[5:5]</bitRange>
+ </field>
+ <field>
+ <name>EZI</name>
+ <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description>
+ <bitRange>[6:6]</bitRange>
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>SLOW_LOW_NOISE_WITH</name>
- <description>Slow (low noise with medium speed)</description>
+ <name>DISABLE_INPUT_BUFFER</name>
+ <description>Disable input buffer</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>FAST_MEDIUM_NOISE_W</name>
- <description>Fast (medium noise with fast speed)</description>
+ <name>ENABLE_INPUT_BUFFER</name>
+ <description>Enable input buffer</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>ZIF</name>
+ <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description>
+ <bitRange>[7:7]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_GLITCH</name>
+ <description>Enable input glitch filter</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_GLITCH</name>
+ <description>Disable input glitch filter</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[7:7]</bitRange>
+
+ </field>
+ <field>
+ <name>EHD</name>
+ <description>Select drive strength</description>
+ <bitRange>[9:8]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>STANDARD_DRIVE_4_MA</name>
+ <description>Standard drive: 4 mA drive strength</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>MEDIUM_DRIVE_8_MA_D</name>
+ <description>Medium drive: 8 mA drive strength</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>HIGH_DRIVE_14_MA_DR</name>
+ <description>High drive: 14 mA drive strength</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ULTRA_HIGH_DRIVE_20</name>
+ <description>Ultra-high drive: 20 mA drive strength</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[31:10]</bitRange>
+
+ </field>
+ </fields>
+ </register>
+ <register>
+ <name>SFSP8_1</name>
+ <description>Pin configuration register for pins P8</description>
+ <addressOffset>0x404</addressOffset>
+ <access>read-write</access>
+ <resetValue>0</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ <fields>
+ <field>
+ <name>MODE</name>
+ <description>Select pin function.</description>
+ <bitRange>[2:0]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>FUNCTION_0_DEFAULT</name>
+ <description>Function 0 (default)</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_1</name>
+ <description>Function 1</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_2</name>
+ <description>Function 2</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_3</name>
+ <description>Function 3</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_4</name>
+ <description>Function 4</description>
+ <value>0x4</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_5</name>
+ <description>Function 5</description>
+ <value>0x5</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_6</name>
+ <description>Function 6</description>
+ <value>0x6</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_7</name>
+ <description>Function 7</description>
+ <value>0x7</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPD</name>
+ <description>Enable pull-down resistor at pad.</description>
+ <bitRange>[3:3]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_PULL_DOWN</name>
+ <description>Disable pull-down.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_PULL_DOWN</name>
+ <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPUN</name>
+ <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description>
+ <bitRange>[4:4]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_PULL_UP</name>
+ <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_PULL_UP</name>
+ <description>Disable pull-up.</description>
<value>1</value>
</enumeratedValue>
</enumeratedValues>
@@ -41909,12 +43315,216 @@
</enumeratedValue>
</enumeratedValues>
</field>
- <field>
- <name>RESERVED</name>
- <description>Reserved</description>
- <bitRange>[31:8]</bitRange>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[7:7]</bitRange>
+ </field>
+ <field>
+ <name>EHD</name>
+ <description>Select drive strength</description>
+ <bitRange>[9:8]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>STANDARD_DRIVE_4_MA</name>
+ <description>Standard drive: 4 mA drive strength</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>MEDIUM_DRIVE_8_MA_D</name>
+ <description>Medium drive: 8 mA drive strength</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>HIGH_DRIVE_14_MA_DR</name>
+ <description>High drive: 14 mA drive strength</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ULTRA_HIGH_DRIVE_20</name>
+ <description>Ultra-high drive: 20 mA drive strength</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[31:10]</bitRange>
+
+ </field>
+ </fields>
+ </register>
+ <register>
+ <name>SFSP8_2</name>
+ <description>Pin configuration register for pins P8</description>
+ <addressOffset>0x408</addressOffset>
+ <access>read-write</access>
+ <resetValue>0</resetValue>
+ <resetMask>0xFFFFFFFF</resetMask>
+ <fields>
+ <field>
+ <name>MODE</name>
+ <description>Select pin function.</description>
+ <bitRange>[2:0]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>FUNCTION_0_DEFAULT</name>
+ <description>Function 0 (default)</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_1</name>
+ <description>Function 1</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_2</name>
+ <description>Function 2</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_3</name>
+ <description>Function 3</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_4</name>
+ <description>Function 4</description>
+ <value>0x4</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_5</name>
+ <description>Function 5</description>
+ <value>0x5</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_6</name>
+ <description>Function 6</description>
+ <value>0x6</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>FUNCTION_7</name>
+ <description>Function 7</description>
+ <value>0x7</value>
+ </enumeratedValue>
+ </enumeratedValues>
</field>
+ <field>
+ <name>EPD</name>
+ <description>Enable pull-down resistor at pad.</description>
+ <bitRange>[3:3]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_PULL_DOWN</name>
+ <description>Disable pull-down.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_PULL_DOWN</name>
+ <description>Enable pull-down.Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EPUN</name>
+ <description>Disable pull-up resistor at pad. By default, the pull-up resistor is enabled at reset.</description>
+ <bitRange>[4:4]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_PULL_UP</name>
+ <description>Enable pull-up. Enable both pull-down resistor and pull-up resistor for repeater mode.</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_PULL_UP</name>
+ <description>Disable pull-up.</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>EZI</name>
+ <description>Input buffer enable. The input buffer is disabled by default at reset and must be enabled for receiving.</description>
+ <bitRange>[6:6]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_BUFFER</name>
+ <description>Disable input buffer</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_BUFFER</name>
+ <description>Enable input buffer</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>ZIF</name>
+ <description>Input glitch filter. Disable the input glitch filter for clocking signals higher than 30 MHz.</description>
+ <bitRange>[7:7]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>ENABLE_INPUT_GLITCH</name>
+ <description>Enable input glitch filter</description>
+ <value>0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>DISABLE_INPUT_GLITCH</name>
+ <description>Disable input glitch filter</description>
+ <value>1</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[7:7]</bitRange>
+
+ </field>
+ <field>
+ <name>EHD</name>
+ <description>Select drive strength</description>
+ <bitRange>[9:8]</bitRange>
+ <enumeratedValues>
+ <name>ENUM</name>
+ <enumeratedValue>
+ <name>STANDARD_DRIVE_4_MA</name>
+ <description>Standard drive: 4 mA drive strength</description>
+ <value>0x0</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>MEDIUM_DRIVE_8_MA_D</name>
+ <description>Medium drive: 8 mA drive strength</description>
+ <value>0x1</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>HIGH_DRIVE_14_MA_DR</name>
+ <description>High drive: 14 mA drive strength</description>
+ <value>0x2</value>
+ </enumeratedValue>
+ <enumeratedValue>
+ <name>ULTRA_HIGH_DRIVE_20</name>
+ <description>Ultra-high drive: 20 mA drive strength</description>
+ <value>0x3</value>
+ </enumeratedValue>
+ </enumeratedValues>
+ </field>
+ <field>
+ <name>RESERVED</name>
+ <description>Reserved</description>
+ <bitRange>[31:10]</bitRange>
+
+ </field>
</fields>
</register>
<register>
@@ -50403,12 +52013,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>THE_MESSAGE_DIRECTIO</name>
+ <name>ACCEPTANCE_FILTER</name>
<description>The message direction bit (DIR) is used for acceptance filtering.</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
- <name>THE_MESSAGE_DIRECTIO</name>
+ <name>NO_EFFECT</name>
<description>The message direction bit (DIR) has no effect on acceptance filtering.</description>
<value>0</value>
</enumeratedValue>
@@ -50421,12 +52031,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>THE_EXTENDED_IDENTIF</name>
+ <name>ACCEPTANCE_FILTER</name>
<description>The extended identifier bit (IDE) is used for acceptance filtering.</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
- <name>THE_EXTENDED_IDENTIF</name>
+ <name>NO_EFFECT</name>
<description>The extended identifier bit (IDE) has no effect on acceptance filtering.</description>
<value>0</value>
</enumeratedValue>
@@ -50523,12 +52133,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>THE_MESSAGE_OBJECT_I</name>
+ <name>THE_MESSAGE_OBJECT_IS_CONFIGURED</name>
<description>The message object is configured and should be considered by the message handler.</description>
<value>1</value>
</enumeratedValue>
<enumeratedValue>
- <name>THE_MESSAGE_OBJECT_I</name>
+ <name>THE_MESSAGE_OBJECT_IS_IGNORED</name>
<description>The message object is ignored by the message handler.</description>
<value>0</value>
</enumeratedValue>
@@ -52213,12 +53823,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -52324,12 +53934,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -52435,12 +54045,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -52546,12 +54156,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -52657,12 +54267,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -52768,12 +54378,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -52879,12 +54489,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -52990,12 +54600,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -53101,12 +54711,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -53212,12 +54822,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -53328,12 +54938,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -53444,12 +55054,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -53555,12 +55165,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -53666,12 +55276,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -53712,8 +55322,8 @@
<value>0x1</value>
</enumeratedValue>
<enumeratedValue>
- <name>TBD__I2S0_TX_MWS</name>
- <description>TBD - I2S0_TX_MWS</description>
+ <name>I2S0_TX_MWS</name>
+ <description>I2S0_TX_MWS</description>
<value>0x2</value>
</enumeratedValue>
<enumeratedValue>
@@ -53782,12 +55392,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -53898,12 +55508,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -54014,12 +55624,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -54125,12 +55735,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -54236,12 +55846,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -54347,12 +55957,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -54463,12 +56073,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -54579,12 +56189,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -54690,12 +56300,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -54806,12 +56416,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -54922,12 +56532,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -55068,12 +56678,12 @@
<enumeratedValues>
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -55186,12 +56796,12 @@
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -55308,12 +56918,12 @@
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -55425,12 +57035,12 @@
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -55542,12 +57152,12 @@
<name>ENUM</name>
<enumeratedValue>
- <name>DISABLE__SYNCHRONIZ</name>
+ <name>DISABLE_SYNCHRONIZATION</name>
<description>Disable synchronization.</description>
<value>0</value>
</enumeratedValue>
<enumeratedValue>
- <name>ENABLE__SYNCHRONIZA</name>
+ <name>ENABLE_SYNCHRONIZATION</name>
<description>Enable synchronization.</description>
<value>1</value>
</enumeratedValue>
@@ -56327,7 +57937,7 @@
<resetMask>0xFFFFFFFF</resetMask>
<fields>
<field>
- <name>TRIGGER__MASK</name>
+ <name>TRIGGER_MASK</name>
<description>00 = triggers off 01 = software trigger only 10 = external trigger only 11 = both triggers allowed</description>
<bitRange>[1:0]</bitRange>
</field>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment