probe-rs.log

DEBUG probe_rs::probe::cmsisdap::tools > Searching for CMSIS-DAP probes using libusb
 DEBUG probe_rs::probe::cmsisdap::tools > Found 0 CMSIS-DAP probes using libusb, searching HID
 DEBUG probe_rs::probe::cmsisdap::tools > Found 0 CMSIS-DAP probes total
 DEBUG jaylink                          > libusb 1.0.26.11724
 DEBUG jaylink                          > libusb has capability API: true
 DEBUG jaylink                          > libusb has HID access: false
 DEBUG jaylink                          > libusb has hotplug support: true
 DEBUG jaylink                          > libusb can detach kernel driver: true
 DEBUG jaylink                          > open_usb: device descriptor: DeviceDescriptor {
    bLength: 0x12,
    bDescriptorType: 0x1,
    bcdUSB: 0x200,
    bDeviceClass: 0x0,
    bDeviceSubClass: 0x0,
    bDeviceProtocol: 0x0,
    bMaxPacketSize: 0x40,
    idVendor: 0x1366,
    idProduct: 0x101,
    bcdDevice: 0x100,
    iManufacturer: 0x1,
    iProduct: 0x2,
    iSerialNumber: 0x3,
    bNumConfigurations: 0x1,
}
 DEBUG jaylink                          > scanning 1 interfaces
 DEBUG jaylink                          > J-Link interface is #0
 DEBUG jaylink                          > legacy caps: GetHwVersion | ReadConfig | WriteConfig | SpeedInfo | GetMaxBlockSize | GetHwInfo | ResetStopTimed | SelectIf | GetCounters | GetCpuCaps | ExecCpuCmd | Swo | Register | Indicators | TestNetSpeed | GetCapsEx
 DEBUG jaylink::capabilities            > unknown ext. capability bits: 0xA146B07C1CB8EA5A33 truncated to 0xB8EA5A33 (Reserved0 | GetHwVersion | ReadConfig | WriteConfig | SpeedInfo | GetMaxBlockSize | GetHwInfo | ResetStopTimed | SelectIf | GetCounters | GetCpuCaps | ExecCpuCmd | Swo | Register | Indicators | TestNetSpeed | GetCapsEx)
 DEBUG jaylink                          > extended caps: GetHwVersion | ReadConfig | WriteConfig | SpeedInfo | GetMaxBlockSize | GetHwInfo | ResetStopTimed | SelectIf | GetCounters | GetCpuCaps | ExecCpuCmd | Swo | Register | Indicators | TestNetSpeed | GetCapsEx
 DEBUG probe_rs::probe::cmsisdap::tools > Attempting to open 1366:0101 in CMSIS-DAP v1 mode
 DEBUG probe_rs::probe::stlink::usb_interface > Acquired libusb context.
 DEBUG jaylink                                > open_usb: device descriptor: DeviceDescriptor {
    bLength: 0x12,
    bDescriptorType: 0x1,
    bcdUSB: 0x200,
    bDeviceClass: 0x0,
    bDeviceSubClass: 0x0,
    bDeviceProtocol: 0x0,
    bMaxPacketSize: 0x40,
    idVendor: 0x1366,
    idProduct: 0x101,
    bcdDevice: 0x100,
    iManufacturer: 0x1,
    iProduct: 0x2,
    iSerialNumber: 0x3,
    bNumConfigurations: 0x1,
}
 DEBUG jaylink                                > scanning 1 interfaces
 DEBUG jaylink                                > J-Link interface is #0
 DEBUG jaylink                                > legacy caps: GetHwVersion | ReadConfig | WriteConfig | SpeedInfo | GetMaxBlockSize | GetHwInfo | ResetStopTimed | SelectIf | GetCounters | GetCpuCaps | ExecCpuCmd | Swo | Register | Indicators | TestNetSpeed | GetCapsEx
 DEBUG jaylink::capabilities                  > unknown ext. capability bits: 0xA146B07C1CB8EA5A33 truncated to 0xB8EA5A33 (Reserved0 | GetHwVersion | ReadConfig | WriteConfig | SpeedInfo | GetMaxBlockSize | GetHwInfo | ResetStopTimed | SelectIf | GetCounters | GetCpuCaps | ExecCpuCmd | Swo | Register | Indicators | TestNetSpeed | GetCapsEx)
 DEBUG jaylink                                > extended caps: GetHwVersion | ReadConfig | WriteConfig | SpeedInfo | GetMaxBlockSize | GetHwInfo | ResetStopTimed | SelectIf | GetCounters | GetCpuCaps | ExecCpuCmd | Swo | Register | Indicators | TestNetSpeed | GetCapsEx
 DEBUG probe_rs::probe::jlink                 > J-Link returned interface CJtag, which is not supported by probe-rs.
 DEBUG probe_rs::probe::jlink                 > Supported speeds: SpeedInfo { base_freq: 96000000, min_div: 24 }
 DEBUG probe_rs::probe::jlink                 > Attaching to J-Link
 DEBUG probe_rs::probe::jlink                 > Attaching with protocol 'JTAG'
 INFO  probe_rs::probe::jlink                 > J-Link: S/N: 801009879
 DEBUG probe_rs::probe::jlink                 > J-Link: Capabilities: GetHwVersion | ReadConfig | WriteConfig | SpeedInfo | GetMaxBlockSize | GetHwInfo | ResetStopTimed | SelectIf | GetCounters | GetCpuCaps | ExecCpuCmd | Swo | Register | Indicators | TestNetSpeed | GetCapsEx
 INFO  probe_rs::probe::jlink                 > J-Link: Firmware version: J-Link EDU Mini V1 compiled Oct  2 2020 17:00:40
 INFO  probe_rs::probe::jlink                 > J-Link: Hardware version: J-Link 1.0.0
 INFO  probe_rs::probe::jlink                 > J-Link: Target voltage: 3.30 V
 DEBUG probe_rs::probe::jlink                 > Resetting JTAG chain using trst
 DEBUG probe_rs::probe::jlink                 > Resetting JTAG chain by setting tms high for 32 bits
 DEBUG probe_rs::probe::jlink                 > Response to reset: [true, true, true, true, true, true]
 DEBUG probe_rs::probe::jlink                 > Read 32 bits from DR
 DEBUG probe_rs::probe::jlink                 > Read from DR: [229, 52, 0, 18]
 INFO  probe_rs::probe::jlink                 > JTAG IDCODE: 0x120034e5
 DEBUG probe_rs::probe::jlink                 > Attached succesfully
 DEBUG probe_rs::probe::jlink                 > Write IR: [8], len=5
 DEBUG probe_rs::probe::jlink                 > Write DR: [7], len=8
 DEBUG probe_rs::probe::jlink                 > Write DR: [135], len=8
 DEBUG probe_rs::probe::jlink                 > Write IR: [28], len=5
 DEBUG probe_rs::probe::jlink                 > Write DR: [135], len=8
 DEBUG probe_rs::probe::jlink                 > Write DR: [1, 0, 0, 0], len=32
 DEBUG probe_rs::probe::jlink                 > Write DR: [128], len=8
 DEBUG probe_rs::probe::jlink                 > Read 32 bits from DR
 DEBUG probe_rs::probe::jlink                 > Read from DR: [0, 0, 0, 0]
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: (Probe { inner: JLink { handle: JayLink { manufacturer: "SEGGER", product: "J-Link", serial: "000801009879" }, swo_config: None, jtag_idle_cycles: 100, ir_len: 5, protocol: Some(Jtag), supported_protocols: [Jtag, Swd], current_ir_reg: 28, speed_khz: 100, probe_statistics: ProbeStatistics { num_transfers: 0, num_extra_transfers: 0, num_io_calls: 0, num_wait_resp: 0, num_faults: 0, num_line_resets: 0 }, swd_settings: SwdSettings { num_idle_cycles_between_writes: 2, num_retries_after_wait: 1000, max_retry_idle_cycles_after_wait: 128, idle_cycles_before_write_verify: 8, idle_cycles_after_transfer: 8 } }, attached: true }, TargetNotFound)', probe-rs/examples/xtensa.rs:18:10
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace