Jeffrey Hebert jmhebert
jmhebert
/ nano_flash_boot.txt
Created
March 18, 2020 14:40
Nano boot sequence after flash.sh executes
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.03.18 09:55:14 =~=~=~=~=~=~=~=~=~=~=~= | |
| 0023.092] Enabled early print | |
| [0023.094] [L4T TegraBoot] (version 00.00.2018.01-l4t-1463e5a5) | |
| [0023.100] Processing in recovery mode | |
| [0023.103] A02 Bootrom Patch rev = 1023 | |
| [0023.107] Power-up reason: pmc por | |
| [0023.110] Established communication link with host | |
| [0024.111] NvTbootI2cWrite(): error code 0x00045100 Error while starting write transaction | |
| [0024.119] NvTbootI2cDeviceRead(): error code 0x00045001 Error while sending the offset to slave | |
| [0024.127] NvTbootI2c: Read failed for slave 0xac, offset 0x00 with error code 0x00045001 |
jmhebert
/ nano_flash_log.txt
Created
March 18, 2020 14:37
Log from flash.sh script execution from terminal
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| (base) jeff@machine:~/nvidia/nvidia_sdk/JetPack_4.3_Linux_P3448/Linux_for_Tegra$ sudo ./flash.sh jetson-nano-qspi-sd mmcblk0p1 | |
| [sudo] password for jeff: | |
| ############################################################################### | |
| # L4T BSP Information: | |
| # R32 , REVISION: 3.1 | |
| ############################################################################### | |
| # Target Board Information: | |
| # Name: jetson-nano-qspi-sd, Board Family: t210ref, SoC: Tegra 210, | |
| # OpMode: production, Boot Authentication: , | |
| ############################################################################### |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [0000.125] [L4T TegraBoot] (version 00.00.2018.01-l4t-39a9dc3d) | |
| [0000.131] Processing in cold boot mode Bootloader 2 | |
| [0000.135] A02 Bootrom Patch rev = 1023 | |
| [0000.139] Power-up reason: pmc por | |
| [0000.142] No Battery Present | |
| [0000.145] pmic max77620 reset reason | |
| [0000.148] pmic max77620 NVERC : 0x40 | |
| [0000.151] RamCode = 0 | |
| [0000.154] Platform has DDR4 type RAM | |
| [0000.157] max77620 disabling SD1 Remote Sense |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [0000.157] [L4T TegraBoot] (version 00.00.2018.01-l4t-39a9dc3d) | |
| [0000.163] Processing in cold boot mode Bootloader 2 | |
| [0000.167] A02 Bootrom Patch rev = 1023 | |
| [0000.171] Power-up reason: software reset | |
| [0000.175] No Battery Present | |
| [0000.177] pmic max77620 reset reason | |
| [0000.181] pmic max77620 NVERC : 0x0 | |
| [0000.184] RamCode = 0 | |
| [0000.186] Platform has DDR4 type RAM | |
| [0000.190] max77620 disabling SD1 Remote Sense |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ############################################################################### | |
| # L4T BSP Information: | |
| # R32 , REVISION: 3.1 | |
| ############################################################################### | |
| # Target Board Information: | |
| # Name: jetson-nano-qspi-sd, Board Family: t210ref, SoC: Tegra 210, | |
| # OpMode: production, Boot Authentication: , | |
| ############################################################################### | |
| ./tegraflash.py --chip 0x21 --applet "/home/jeff/nvidia/nvidia_sdk/JetPack_4.3_Linux_P3448/Linux_for_Tegra/bootloader/nvtboot_recovery.bin" --skipuid --cmd "dump eeprom boardinfo cvm.bin" | |
| Welcome to Tegra Flash |
jmhebert
/ gist:be617a99d799b500279608c09114561a
Created
March 16, 2020 20:16
Nano SDK Manager Flash Failure
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [0012.891] Enabled early print | |
| [0012.894] [L4T TegraBoot] (version 00.00.2018.01-l4t-1463e5a5) | |
| [0012.900] Processing in recovery mode | |
| [0012.903] A02 Bootrom Patch rev = 1023 | |
| [0012.907] Power-up reason: pmc por | |
| [0012.910] Established communication link with host | |
| [0013.993] NvTbootI2cWrite(): error code 0x00045100 Error while starting write transaction | |
| [0014.001] NvTbootI2cDeviceRead(): error code 0x00045001 Error while sending the offset to slave | |
| [0014.009] NvTbootI2c: Read failed for slave 0xac, offset 0x00 with error code 0x00045001 | |
| [0264.126] Odmdata from BCT: 0x00094000 |