johnaboxall

// https://tronixstuff.com/2025/04/15/project-arduino-controlled-traffic-lights/
//
// define the I/O pins that are used on the Arduino
// ... the buttons
#define westButton 5
#define eastButton 12

// the LEDs on the traffic light modules
#define westRed 4
#define westYellow 3

johnaboxall

#include <Arduino.h>
#include <U8g2lib.h>
#include <Adafruit_BMP085.h>
#include <Wire.h>

U8G2_SSD1306_64X32_1F_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);

Adafruit_BMP085 bmp;

int temperature;

johnaboxall

#include <Arduino.h>
#include <U8g2lib.h>
#include <Wire.h>

void TCA9548A(uint8_t bus)
{
  Wire.beginTransmission(0x70);  // TCA9548A address is 0x70
  Wire.write(1 << bus);          // send byte to select bus
  Wire.endTransmission();
}

johnaboxall

// BMP180 library - https://github.com/adafruit/Adafruit-BMP085-Library

#include <Arduino.h>
#include <U8g2lib.h>
#include <Adafruit_BMP085.h>
#include <Wire.h>

U8G2_SSD1306_64X32_1F_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);

Adafruit_BMP085 bmp;

johnaboxall

#include <Arduino.h>
#include <U8g2lib.h>
#include <Wire.h>

void TCA9548A(uint8_t bus)
{
  Wire.beginTransmission(0x70);  // TCA9548A address is 0x70
  Wire.write(1 << bus);          // send byte to select bus
  Wire.endTransmission();
}

johnaboxall

#include <Arduino.h>
#include <U8g2lib.h>
#include <Wire.h>

U8G2_SSD1306_64X32_1F_F_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);

void setup() {
  u8g2.begin();
}

johnaboxall

// data receiver sketch
//
//  https://pmdway.com/blogs/product-guides-for-arduino/tutorial-using-long-range-315mhz-rf-wireless-transceivers-with-arduino
//
//

#include <VirtualWire.h>

// use onboard LED for status
const int ledPin = 13;

johnaboxall

// data transmitter sketch
//
//  https://pmdway.com/blogs/product-guides-for-arduino/tutorial-using-long-range-315mhz-rf-wireless-transceivers-with-arduino
//
//
#include <VirtualWire.h>

// use onboard LED for status
const int ledPin = 13;

johnaboxall

// receiver sketch
//
// https://pmdway.com/blogs/product-guides-for-arduino/tutorial-using-long-range-315mhz-rf-wireless-transceivers-with-arduino
//
#include <VirtualWire.h>
uint8_t buf[VW_MAX_MESSAGE_LEN];
uint8_t buflen = VW_MAX_MESSAGE_LEN;
void setup()
{
  vw_set_ptt_inverted(true); // Required for RF link modules

johnaboxall

// transmitter sketch
//
// https://pmdway.com/blogs/product-guides-for-arduino/tutorial-using-long-range-315mhz-rf-wireless-transceivers-with-arduino
//
#include <VirtualWire.h>
uint8_t buf[VW_MAX_MESSAGE_LEN];
uint8_t buflen = VW_MAX_MESSAGE_LEN;
const char *on2 = "a";
const char *off2 = "b";
const char *on3 = "c";