eco setup

How I built my ECO keyboard using a Mac

started from: 

https://www.gitbook.com/book/qmk/firmware/details
https://deskthority.net/workshop-f7/how-to-use-a-pro-micro-as-a-cheap-controller-converter-like-soarer-s-t8448.html
https://learn.sparkfun.com/tutorials/pro-micro--fio-v3-hookup-guide#troubleshooting-and-faq
https://imgur.com/gallery/YzsYs

best way to do it:

1) install brew https://brew.sh/
2) set up everything else https://docs.qmk.fm/getting_started_build_tools.html
3) build your hex file https://kbfirmware.com/
4) install the hex 
- figure out which port your pro micro is on
- reset pro micro
- run avrdude command
- https://deskthority.net/workshop-f7/how-to-use-a-pro-micro-as-a-cheap-controller-converter-like-soarer-s-t8448.html

old notes:

1) clone QMK
2) cd to root of QMK to run make command
3) write out avrdude command first, then plug in pro micro, reset pro micro manually, hten run avrdude command