Synology Squid Adserver.md

Install the Proxy Server package. Just go to Package Manager in DSM and install Proxy Server.
Edit squid.conf to tell it about your ad file. Ssh to the box, and edit the file /var/packages/ProxyServer/target/squid/etc/squid.conf (vi is installed by default)

You're going to add 2 lines to this file. First, under the auth_param section, you're going to add:

acl ads dstdom_regex -i "/var/packages/ProxyServer/target/squid/etc/squid.adservers"

Next, in the http_access section you're going to add:

http_access deny ads

After this was done, squid.conf looks like this (DSM 6.1.5):

#----------
include /var/packages/ProxyServer/target/squid/etc/auth_setting_syno.conf
#----------
auth_param basic children 5
auth_param basic credentialsttl 2 hours

# adblock
acl ads dstdom_regex -i "/var/packages/ProxyServer/target/squid/etc/squid.adservers"

acl Safe_ports_syno port 80             # http
acl Safe_ports_syno port 21             # ftp
acl Safe_ports_syno port 443            # https
acl Safe_ports_syno port 70             # gopher
acl Safe_ports_syno port 210            # wais
acl Safe_ports_syno port 1025-65535     # unregistered ports
acl Safe_ports_syno port 280            # http-mgmt
acl Safe_ports_syno port 488            # gss-http
acl Safe_ports_syno port 591            # filemaker
acl Safe_ports_syno port 777            # multiling http
#----------
include /var/packages/ProxyServer/target/squid/etc/acl_syno.conf
#----------

http_access deny !Safe_ports_syno
http_access allow localhost manager
http_access deny manager
http_access deny to_localhost
http_access allow localhost
http_access deny ads #ad blocking
#deny_info TCP_RESET ads #optional to send RST back
#----------
include /var/packages/ProxyServer/target/squid/etc/access_syno.conf
#----------
http_access deny all

coredump_dir /var/packages/ProxyServer/target/squid/var/logs/

refresh_pattern ^ftp:           1440    20%     10080
refresh_pattern ^gopher:        1440    0%      1440
refresh_pattern -i (/cgi-bin/|\?) 0     0%      0
refresh_pattern .               0       20%     4320
shutdown_lifetime 0 seconds


#----------
include /var/packages/ProxyServer/target/squid/etc/general_setting_syno.conf
include /var/packages/ProxyServer/target/squid/etc/cache_setting_syno.conf
#----------
dns_multicast_local on
max_filedesc 4096
httpd_suppress_version_string on

Create getAds.sh Now (still in ssh) you're going to add a new file /var/packages/ProxyServer/target/squid/etc/getAds.sh, the contents of which are below.

Here's the script that downloads an updated squid.adservers file:

#!/bin/sh

### short script that downloads a list of ad servers for use with
### squid to block ads.
###
### details on configuring squid itself can be found here:
###
### http://pgl.yoyo.org/adservers/#withsquid
###
### - originally by Stephen Patterson <[email protected]>
### - butchered by Peter Lowe <[email protected]>
### - modified by Eric Jones <[email protected]> 
### - for use with Synology ProxyServer
###

## set things
##

# URL of the ad server list to download
listurl='http://pgl.yoyo.org/adservers/serverlist.php?hostformat=squid-dstdom-regex&showintro=0&mimetype=plaintext'

# location of the list of ad servers used by Squid
targetfile='/var/packages/ProxyServer/target/squid/etc/squid.adservers'

# command to reload squid - change according to your system
reloadcmd='/var/packages/ProxyServer/target/bin/squid -k reconfigure'

# temp file to use
tmpfile="/tmp/.adlist.$$"

# command to fetch the list
fetchcmd="wget -q $listurl -O $tmpfile"

## do things
##

# get a fresh list of ad server addresses for squid to refuse
$fetchcmd

# check the temp file exists OK before overwriting the existing list
if [ ! -s $tmpfile ]
then
echo "temp file '$tmpfile' either doesn't exist or is empty; quitting"
exit
fi

# sort and filter out duplicates
sort $tmpfile > $targetfile

# clean up
rm $tmpfile

# restart Squid
$reloadcmd

Make the script runnable: sudo chmod +x getAds.sh and run it to test sudo ./getAds.sh

Setup Task Scheduler to update weekly. Lastly, just use the Task Scheduler (in the System section of the DSM Control Panel) to run your /var/packages/ProxyServer/target/squid/etc/getAds.sh script once a week (as root).

nkundu/Synology Squid Adserver.md