werner mendizabal nonameentername

We have Server machine, this computer with Headphones, and we have Client computer, this is remote PC with music =) On Server we should first open port for listening connections from Client :

# on ubuntu 
sudo ufw allow from <Client_IP> to any port 4656 proto tcp
# on fedora ( with firewalld ) 
sudo firewall-ctl --add-port 4656/tcp

note: port 4656 just for sample. you can use any port you want
than on Server, from current user add listening for connections

Visual Studio Code and C# code completion and debugger for Godot

Ok, this is a quick document to guide you through the setup of a Godot project in Visual Studio Code.
I'll assume you have a working C# environment installed. Note that on Linux, you might need to install Mono for everything to work fine with Godot 3.x.

1. Install the necessary extensions

First off, make sure you have the following extensions installed and active in Visual Studio Code:

C#

How to set up PulseAudio over Network

PulseAudio actually has great networking capabilities. Especially when combined with Avahi/Zeroconf it is especially easy to set up, though technically it should also be possible without.

Setting up the server

Open /etc/pulseaudio/default.pa
At the end of the file, add load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1;192.168.254.0/24 auth-anonymous=1 to activate networked audio from 192.168.254.0-255 without needing authentication.
Kill pulseaudio, it should be auto-restarted, or restart your login session to activate the changes. You should now be able to set PULSE_SERVER=192.168.254.XXX and have the remote audio working! If not check the firewall settings, PulseAudio seems to open a random port by default.

Setting up automatic configuration and discovery

On both the server and client, install pulseaudio-module-zeroconf and avahi, then after installing make sure Avahi always runs by running systemctl enable --now avahi-daemon

#Install blender as a module with python 3.5 and pyenv

Tested on Ubuntu 14.04.

Setting up a new python environment using pyenv

Follow instructions from here.

Installing boost

Follow instructions from here.

Howto

Install these programms

sudo apt-get install gnome-raw-thumbnailer ufraw-batch

Try now if everything works, and your thumbnails show up. If not, try the following part.

Running Docker on two hosts, bridged with Open vSwitch

This Gist shows how to use Open vSwitch to bridge Docker containers on two hosts. It is based on this blog post http://goldmann.pl/blog/2014/01/21/connecting-docker-containers-on-multiple-hosts/.

A similar Gist using Tinc instead of Open vSwitch is available: https://gist.github.com/noteed/11031504.

	#!/bin/bash

	# -----------------------------------------------------------
	# -- Write psdthumbnailer
	# -----------------------------------------------------------
	OUTFILE=/usr/lib/psdthumbnailer
	(
	sudo cat <<'EOF'
	# bin/bash

	javascript:
	document.querySelectorAll('.load-diff-button').forEach(node => node.click())