Created
April 4, 2017 06:33
-
-
Save odivlad/2f4d4ec9094e59d1e1fb4e2d618b31b1 to your computer and use it in GitHub Desktop.
smartctl
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| [root@hv ~]# for d in sda sdb sdc sde; do echo "Smartctl for /dev/$d"; echo; smartctl -a /dev/$d; echo; done | |
| Smartctl for /dev/sda | |
| smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.14-200.fc25.x86_64] (local build) | |
| Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate Momentus 5400.6 | |
| Device Model: ST9500325AS | |
| Serial Number: S2W51N2D | |
| LU WWN Device Id: 5 000c50 04621c08f | |
| Firmware Version: 0003SDM1 | |
| User Capacity: 500,107,862,016 bytes [500 GB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: 5400 rpm | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS T13/1699-D revision 4 | |
| SATA Version is: SATA 2.6, 3.0 Gb/s | |
| Local Time is: Tue Apr 4 09:32:41 2017 MSK | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x73) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 140) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 2) minutes. | |
| SCT capabilities: (0x103b) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 205081872 | |
| 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1903 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1 | |
| 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 120023605 | |
| 9 Power_On_Hours 0x0032 080 080 000 Old_age Always - 18079 | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1919 | |
| 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 | |
| 188 Command_Timeout 0x0032 100 069 000 Old_age Always - 2495414076952 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 058 047 045 Old_age Always - 42 (Min/Max 40/43) | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 921 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 471791 | |
| 194 Temperature_Celsius 0x0022 042 053 000 Old_age Always - 42 (0 7 0 0 0) | |
| 195 Hardware_ECC_Recovered 0x001a 052 048 000 Old_age Always - 205081872 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 191 000 Old_age Always - 488439 | |
| 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 5708 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| Smartctl for /dev/sdb | |
| smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.14-200.fc25.x86_64] (local build) | |
| Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate Momentus 5400.6 | |
| Device Model: ST9500325AS | |
| Serial Number: 6VEM6FJ6 | |
| LU WWN Device Id: 5 000c50 032c20ce1 | |
| Firmware Version: 0003SDM1 | |
| User Capacity: 500,107,862,016 bytes [500 GB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: 5400 rpm | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS T13/1699-D revision 4 | |
| SATA Version is: SATA 2.6, 3.0 Gb/s | |
| Local Time is: Tue Apr 4 09:32:41 2017 MSK | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x73) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 140) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 2) minutes. | |
| SCT capabilities: (0x103b) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 118 083 006 Pre-fail Always - 173961409 | |
| 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4607 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 3 | |
| 7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 232905160 | |
| 9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13216 | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 096 096 020 Old_age Always - 4623 | |
| 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 743 | |
| 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 21475164180 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 058 047 045 Old_age Always - 42 (Min/Max 40/43) | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 338 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 68 | |
| 193 Load_Cycle_Count 0x0032 082 082 000 Old_age Always - 37512 | |
| 194 Temperature_Celsius 0x0022 042 053 000 Old_age Always - 42 (0 14 0 0 0) | |
| 195 Hardware_ECC_Recovered 0x001a 052 039 000 Old_age Always - 173961409 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
| 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0 | |
| SMART Error Log Version: 1 | |
| ATA Error Count: 1136 (device log contains only the most recent five errors) | |
| CR = Command Register [HEX] | |
| FR = Features Register [HEX] | |
| SC = Sector Count Register [HEX] | |
| SN = Sector Number Register [HEX] | |
| CL = Cylinder Low Register [HEX] | |
| CH = Cylinder High Register [HEX] | |
| DH = Device/Head Register [HEX] | |
| DC = Device Command Register [HEX] | |
| ER = Error register [HEX] | |
| ST = Status register [HEX] | |
| Powered_Up_Time is measured from power on, and printed as | |
| DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
| SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
| Error 1136 occurred at disk power-on lifetime: 4108 hours (171 days + 4 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 00 47 18 ce 0b Error: UNC at LBA = 0x0bce1847 = 198056007 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 40 2a 32 0b 40 00 00:57:10.254 READ FPDMA QUEUED | |
| 61 00 08 a8 e6 62 40 00 00:57:10.253 WRITE FPDMA QUEUED | |
| 61 00 08 90 2a 37 40 00 00:57:10.253 WRITE FPDMA QUEUED | |
| 61 00 08 a0 e1 62 40 00 00:57:10.252 WRITE FPDMA QUEUED | |
| 61 00 08 18 2a 37 40 00 00:57:10.251 WRITE FPDMA QUEUED | |
| Error 1135 occurred at disk power-on lifetime: 4108 hours (171 days + 4 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 00 47 18 ce 0b Error: WP at LBA = 0x0bce1847 = 198056007 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 61 00 08 48 cc 60 40 00 00:57:07.622 WRITE FPDMA QUEUED | |
| 61 00 08 30 ef 5f 40 00 00:57:07.621 WRITE FPDMA QUEUED | |
| 61 00 08 90 40 60 40 00 00:57:07.618 WRITE FPDMA QUEUED | |
| 61 00 08 20 ef 5f 40 00 00:57:07.617 WRITE FPDMA QUEUED | |
| 61 00 08 18 3c 60 40 00 00:57:07.617 WRITE FPDMA QUEUED | |
| Error 1134 occurred at disk power-on lifetime: 4108 hours (171 days + 4 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 00 47 18 ce 0b Error: WP at LBA = 0x0bce1847 = 198056007 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 61 00 08 00 ef 5b 40 00 00:57:04.911 WRITE FPDMA QUEUED | |
| 60 00 20 20 5f 65 40 00 00:57:04.908 READ FPDMA QUEUED | |
| 61 00 08 48 53 65 40 00 00:57:04.907 WRITE FPDMA QUEUED | |
| 61 00 08 78 c4 64 40 00 00:57:04.906 WRITE FPDMA QUEUED | |
| 60 00 38 f8 79 8e 4b 00 00:57:04.906 READ FPDMA QUEUED | |
| Error 1133 occurred at disk power-on lifetime: 4108 hours (171 days + 4 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 00 47 18 ce 0b Error: UNC at LBA = 0x0bce1847 = 198056007 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 80 78 79 8e 4b 00 00:57:02.145 READ FPDMA QUEUED | |
| 60 00 20 30 18 ce 4b 00 00:57:02.141 READ FPDMA QUEUED | |
| 60 00 08 88 91 8b 4b 00 00:57:02.139 READ FPDMA QUEUED | |
| 60 00 20 40 ae fb 48 00 00:57:02.127 READ FPDMA QUEUED | |
| 61 00 08 88 ac 6f 46 00 00:57:02.126 WRITE FPDMA QUEUED | |
| Error 1132 occurred at disk power-on lifetime: 4108 hours (171 days + 4 hours) | |
| When the command that caused the error occurred, the device was active or idle. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 40 51 00 47 18 ce 0b Error: UNC at LBA = 0x0bce1847 = 198056007 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 60 00 08 e0 b4 60 40 00 00:56:59.437 READ FPDMA QUEUED | |
| 61 00 08 c0 53 01 40 00 00:56:59.431 WRITE FPDMA QUEUED | |
| 60 00 40 10 18 ce 4b 00 00:56:59.427 READ FPDMA QUEUED | |
| 60 00 80 c0 42 13 46 00 00:56:59.427 READ FPDMA QUEUED | |
| 60 00 40 48 d2 2f 45 00 00:56:59.426 READ FPDMA QUEUED | |
| SMART Self-test log structure revision number 1 | |
| No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| Smartctl for /dev/sdc | |
| smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.14-200.fc25.x86_64] (local build) | |
| Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: SandForce Driven SSDs | |
| Device Model: KINGSTON SV300S37A120G | |
| Serial Number: 50026B775B093A31 | |
| LU WWN Device Id: 5 0026b7 75b093a31 | |
| Firmware Version: 605ABBF2 | |
| User Capacity: 120,034,123,776 bytes [120 GB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 | |
| SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Tue Apr 4 09:32:42 2017 MSK | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 0) seconds. | |
| Offline data collection | |
| capabilities: (0x7d) SMART execute Offline immediate. | |
| No Auto Offline data collection support. | |
| Abort Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 48) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 2) minutes. | |
| SCT capabilities: (0x0025) SCT Status supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x0032 120 120 050 Old_age Always - 0/0 | |
| 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0 | |
| 9 Power_On_Hours_and_Msec 0x0032 093 093 000 Old_age Always - 6150h+31m+13.660s | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 32 | |
| 171 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0 | |
| 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 20 | |
| 177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 0 | |
| 181 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0 | |
| 182 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0 | |
| 189 Airflow_Temperature_Cel 0x0000 039 046 000 Old_age Offline - 39 (Min/Max 23/46) | |
| 194 Temperature_Celsius 0x0022 039 046 000 Old_age Always - 39 (Min/Max 23/46) | |
| 195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/0 | |
| 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 | |
| 201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/0 | |
| 204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/0 | |
| 230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100 | |
| 231 SSD_Life_Left 0x0000 100 100 011 Old_age Offline - 64424509440 | |
| 233 SandForce_Internal 0x0032 000 000 000 Old_age Always - 27 | |
| 234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 40 | |
| 241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 40 | |
| 242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 14 | |
| 244 Unknown_Attribute 0x0000 100 100 010 Old_age Offline - 131072 | |
| SMART Error Log not supported | |
| SMART Self-test log structure revision number 1 | |
| No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| Smartctl for /dev/sde | |
| smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.14-200.fc25.x86_64] (local build) | |
| Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Model Family: Seagate Barracuda Green (AF) | |
| Device Model: ST1500DL003-9VT16L | |
| Serial Number: 6YD20C55 | |
| LU WWN Device Id: 5 000c50 046c98ed8 | |
| Firmware Version: CC3C | |
| User Capacity: 1,500,301,910,016 bytes [1.50 TB] | |
| Sector Sizes: 512 bytes logical, 4096 bytes physical | |
| Rotation Rate: 5900 rpm | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: ATA8-ACS T13/1699-D revision 4 | |
| SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) | |
| Local Time is: Tue Apr 4 09:32:42 2017 MSK | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x82) Offline data collection activity | |
| was completed without error. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 633) seconds. | |
| Offline data collection | |
| capabilities: (0x7b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 286) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 2) minutes. | |
| SCT capabilities: (0x30b7) SCT Status supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 10 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x000f 100 099 006 Pre-fail Always - 1033680 | |
| 3 Spin_Up_Time 0x0003 096 092 000 Pre-fail Always - 0 | |
| 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 328 | |
| 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x000f 071 060 030 Pre-fail Always - 133581685585 | |
| 9 Power_On_Hours 0x0032 062 062 000 Old_age Always - 33964 | |
| 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 274 | |
| 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 | |
| 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 | |
| 187 Reported_Uncorrect 0x0032 098 098 000 Old_age Always - 2 | |
| 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 18 | |
| 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 | |
| 190 Airflow_Temperature_Cel 0x0022 060 046 045 Old_age Always - 40 (Min/Max 40/41) | |
| 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 | |
| 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 283 | |
| 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 329 | |
| 194 Temperature_Celsius 0x0022 040 054 000 Old_age Always - 40 (0 18 0 0 0) | |
| 195 Hardware_ECC_Recovered 0x001a 010 003 000 Old_age Always - 1033680 | |
| 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 | |
| 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 33898 (246 129 0) | |
| 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 462706583 | |
| 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2921343414 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment