@everyone
Hakai v2026-06-21:
This will give you MPC firmware 3.9.0 + All of the Hakai Mojo.
Trouble shooting: If your MPC doesn't want to update with this Hakai firmware please make sure that you are not running the Hakai driver, if so unplug your external midi controller and reboot and try again. If you're not running the Hakai driver just reboot and try again. If it still not working than check your USB Drive/SD card name it anything but not "HAKAI" and try again. As a last resort do the official Akai update by using a PC tethered with a USB cable. After doing so try this firmware again, this will surely work.
Please read page 7 of the instruction file for instructions on mouse support
The Hakai Driver will give you the ability to use an external midi controller to control the MPC interface and launch clips in the MATRIX. Currently only the Novation Launchpad Mk III is supported. And it's only been tested on a Gen1 MPC X and MPC X SE, MPC Live II & MPC One. You can also try it on other MPC's but not on Gen2 devices. And please read the instruction PDF file..!!
Features: SSH is enabled Mouse support (Yeah baby) Hakai drive for external midi controller (LPPro Mk III) Load more than 8 audio tracks (32 max) Load more than 8 plugin tracks (32 max) Change the audio buffer size of your soundcard *No Dev Mode (No longer needed with mouse support) *No Force Mode (No longer needed since 3.x.x)
For the rest of the HAKAI features this version supports the following units: MPC One MPC One+ MPC Live I MPC Live II MPC X MPC X SE MPC Key 37 MPC Key 61 Just do the regular USB update to install this firmware.
Just a kindly reminder that Hakai's intention is to bring you guys the wonderful and best of the latest firmware. We just want to give you the possibility to enjoy your MPC's the way it should have been from the start. Hakai won't deliver you the tools to hack paid plugins or software. That's called piracy and we don't support that..!! That being said go to the following link for the instructions & download (password = hakai):
https://linkenc.net/#iFINLcDnhflUVgxpvNBepfyysKwCa-UCW1iTv2iayKryJNoWDLlpbxp6ABFAbl0BZDCTtpMCCmq8nvmc-2MVy5G8K0Ar8GOFIfg47Xhcig4mFWlBDGWtEH8kRlTusl2Cc45-fdCvsfPLlpygESa0OIz38MdKynR4iDS2idHmUDJq9CnwOaLTQE-qFAUgIBgXFwSiMhv2KY4LR843BX0tF7CfZ4gThxemwqi8JugPd-4V6cIxjIHfpU5g~ There are 2 links in there..!! (One link for the instruction file and one link for the custom firmware)
Credits are found in the instructions file. But for this round I would like to thank: Tfxm LtFred Otis Kingsley Boucher Todd Nickolas EQ AX SQ Frederique Privé for testing it on their units.
https://drive.google.com/file/d/1SWqEMdU3Xgzxekkyy19GFzfDhy3EV1Sh/view?usp=sharing https://drive.google.com/file/d/1317-pbzZ9IFaUBTZ7ZxJwHeH-kH3OzRA/view?usp=drive_link