m5stick esphome config

m5stick-c.yaml

esphome:
  name: m5stick
  friendly_name: m5stick

esp32:
  board: m5stick-c
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "<ENC KEY>"

ota:
  password: "<PASSWORD>"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "m5stick Fallback Hotspot"
    password: "m5stick"

captive_portal:
    
# Built-in Serial Peripheral Interface (SPI)
spi:
  clk_pin: GPIO13
  mosi_pin: GPIO15

# Built-in I2C Bus. Bus_external is for devices connected via the HAT pins. Not sure which interface is used for devices connected via the Grove port
i2c:
  - id: i2c_internal
    sda: 21
    scl: 22
    scan: true
  - id: i2c_external
    sda: 0
    scl: 26
    scan: true



# Built-in Red Status LED Light. See https://esphome.io/components/light/status_led.html
light:
  - platform: status_led
    name: "LED Light"
    restore_mode: ALWAYS_OFF
    pin:
      number: GPIO10
      inverted: true

# Built-in buttons. See https://esphome.io/components/button/
binary_sensor:
  - platform: gpio
    pin:
      number: GPIO37
      inverted: true
    id: button_a
    name: Button A
  - platform: gpio
    pin:
      number: GPIO39
      inverted: true
    id: button_b
    name: Button B

# Built-in infrared transmitter. See https://esphome.io/components/remote_transmitter.html and https://m5stack.hackster.io/alessandro-polselli/turn-m5stickc-into-universal-ir-remote-home-automation-d3ec0d
#remote_transmitter:
#  pin: GPIO9
#  carrier_duty_percent: 50%

# Built-in 6-axis intertial measurement unit (IMU) that also includes a temperature sensor
sensor:
  - platform: mpu6886
    i2c_id: i2c_internal
    address: 0x68
    accel_x:
      name: "MPU6886 Accel X"
    accel_y:
      name: "MPU6886 Accel Y"
    accel_z:
      name: "MPU6886 Accel z"
    gyro_x:
      name: "MPU6886 Gyro X"
    gyro_y:
      name: "MPU6886 Gyro Y"
    gyro_z:
      name: "MPU6886 Gyro z"
    temperature:
      name: "MPU6886 Temperature"
  # AXP192 power management - must be present to initialize TFT power on
  - platform: axp192
    address: 0x34
    i2c_id: i2c_internal
    update_interval: 30s
    battery_level:
      name: "M5Stick Battery Level"
      id: "m5stick_batterylevel"

# Fonts
font:
  - file: 'arial.ttf'
    id: font1
    size: 8

  - file: 'arial.ttf'
    id: font2
    size: 36

  - file: 'arial.ttf'
    id: font3
    size: 14

# builtin 80x160 TFT
display:
  - platform: st7735
    cs_pin: GPIO5
    dc_pin: GPIO23
    reset_pin: GPIO18
    device_height: 80
    device_width: 160
    row_start: 0
    col_start: 0
    model: "INITR_MINI160X80"
    rotation: 0
    update_interval: 1s
    lambda: |-      
      auto red = Color(255, 0, 0);
      auto green = Color(0, 255, 0);
      auto blue = Color(0, 0, 255);
      auto white = Color(255, 255, 255);
      it.rectangle(20, 50, 30, 30, white);
      it.rectangle(25, 55, 30, 30, red);
      it.rectangle(30, 60, 30, 30, green);
      it.rectangle(35, 65, 30, 30, blue);

time:
  - platform: homeassistant
    id: homeassistant_time
  - platform: sntp
    id: sntp_time