esphome ifan02 cookbook info

ifan02.h

#include "esphome.h"
using namespace esphome;

class IFan02Output : public Component, public FloatOutput {
  public:
    void write_state(float state) override {
      if (state < 0.3) {
        // OFF
        digitalWrite(5, LOW);
        digitalWrite(4, LOW);
        digitalWrite(15, LOW);
      } else if (state < 0.6) {
        // low speed
        digitalWrite(5, HIGH);
        digitalWrite(4, LOW);
        digitalWrite(15, LOW);
      } else if (state < 0.9) {
        // medium speed
        digitalWrite(5, HIGH);
        digitalWrite(4, HIGH);
        digitalWrite(15, LOW);
      } else {
        // high speed
        digitalWrite(5, HIGH);
        digitalWrite(4, LOW);
        digitalWrite(15, HIGH);
      }
    }
};

ifan02.yaml

esphome:
  name: ifan02
  platform: ESP8266
  board: esp8285
  includes:
    - ifan02.h
  on_boot:
    priority: 225
    # turn off the light as early as possible
    then:
      - light.turn_off: ifan02_light

wifi:
  ssid: <YOUR_SSID>
  password: <YOUR_PASSWORD>

api:

logger:

ota:

binary_sensor:
  - platform: gpio
    id: vbutton_light
    pin:
      number: GPIO0
      inverted: True
    on_press:
      then:
        - light.toggle: ifan02_light

  - platform: gpio
    id: vbutton_relay_1
    pin:
      number: GPIO9
      inverted: True
    on_press:
      then:
        - switch.toggle: fan_relay1
        - switch.turn_on: update_fan_speed

  - platform: gpio
    id: vbutton_relay_2
    pin:
      number: GPIO10
      inverted: True
    on_press:
      then:
        - switch.toggle: fan_relay2
        - switch.turn_on: update_fan_speed

  - platform: gpio
    id: vbutton_relay_3
    pin:
      number: GPIO14
      inverted: True
    on_press:
      then:
        - switch.toggle: fan_relay3
        - switch.turn_on: update_fan_speed

output:
  - platform: custom
    type: float
    outputs:
      id: fanoutput
    lambda: |-
      auto ifan02_fan = new IFan02Output();
      App.register_component(ifan02_fan);
      return {ifan02_fan};

  - platform: gpio
    pin: GPIO12
    id: light_output

light:
  - platform: binary
    name: "iFan02 Light"
    output: light_output
    id: ifan02_light

switch:
  - platform: template
    id: update_fan_speed
    optimistic: True
    turn_on_action:
      then:
        - delay: 200ms
        - if:
            condition:
              and:
                - switch.is_off: fan_relay1
                - switch.is_off: fan_relay2
                - switch.is_off: fan_relay3
            then:
              - fan.turn_off: ifan02_fan
        - if:
            condition:
              and:
                - switch.is_on: fan_relay1
                - switch.is_off: fan_relay2
                - switch.is_off: fan_relay3
            then:
              - fan.turn_on:
                  id: ifan02_fan
                  speed: LOW
        - if:
            condition:
              and:
                - switch.is_on: fan_relay1
                - switch.is_on: fan_relay2
                - switch.is_off: fan_relay3
            then:
              - fan.turn_on:
                  id: ifan02_fan
                  speed: MEDIUM
        - if:
            condition:
              and:
                - switch.is_on: fan_relay1
                - switch.is_off: fan_relay2
                - switch.is_on: fan_relay3
            then:
              - fan.turn_on:
                  id: ifan02_fan
                  speed: HIGH
        - switch.turn_off: update_fan_speed

  - platform: gpio
    pin: GPIO5
    id: fan_relay1

  - platform: gpio
    pin: GPIO4
    id: fan_relay2

  - platform: gpio
    pin: GPIO15
    id: fan_relay3

fan:
  - platform: speed
    output: fanoutput
    id: ifan02_fan
    name: "iFan02 Fan"

Thank you @DeeBeeKay and @rishabmehta7 . I will test it as soon as I can ;)

I do have an iFan04H but no cycles to check the GPIOs, if you figure it out. Let me know :-)