Created
September 7, 2023 18:01
-
-
Save rostok/bf4beda2d92c217f6e12ee230aae1676 to your computer and use it in GitHub Desktop.
source code for the wall builder - a pico8 game under 1kb
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| pico-8 cartridge // http://www.pico-8.com | |
| version 41 | |
| __lua__ | |
| -- The Wall Builder - a Pico1k 2023 jam entry by https://rostok.itch.io/ @von_rostock | |
| pal({2,-8,8,14},1) -- sets the palette gradient for bricks | |
| local x,y,l,P,Q,T,X,Y,c=61,72.5,0,0,0,0,0 -- variables | |
| -- x,y person position on screen | |
| -- l if 1 then person holds brick 0 doesn't | |
| -- P,Q coordinates of current area, start area is 0,0 | |
| -- T 1/4th brick counter, if equals N wall is raised | |
| -- X,Y local temp vars | |
| -- c collision | |
| -- -1 no collision | |
| -- 0 collision with place for brick | |
| -- 1,2,3,4 collision with wall of specified height | |
| local R,bw,bh=36,8,4 -- R wall radius, bw/bh brick width, brick height | |
| local N=(R*6.3)\bw -- N number of bricks at peremeter | |
| local W,OW={} -- W "WALL" table with brick places, OW start screen wall | |
| for i=1,N+N do -- initialize bricks, there are total of N*4 bricks | |
| X=cos(i/N)*R+64 -- | |
| Y=sin(i/N)*R/2+64 -- X/Y are coords of brick place | |
| B={} -- B is temp table to hold brick place | |
| B.h=0 -- .h place height 0..4 | |
| B.a=-i/N -- .a angle | |
| B.s=1 -- .s if 1 then should be shifted (wall), 0 not (brick stack) | |
| if(i>N)B.a=.25B.s=0Y=70-(i-N)\4B.h=4X=85-(i-N)%4*bw -- initialize brick stack (horizontal, not shifted, stacked) | |
| B.x=X -- save brick place position | |
| B.y=Y -- | |
| B.U=cos(-B.a) -- save brick direction | |
| B.V=sin(-B.a)/2 -- | |
| I=1 while I<=#W and Y>W[I].y do I+=1 end add(W,B,I) -- brick places are sorted according to y coord ascending | |
| end -- | |
| OW=W -- save Original Wall | |
| ::__:: -- loop to randomize screens with ruins | |
| srand(P*64+Q) -- each is unique but should be the same if player returns | |
| local O,M={},"" -- O is other wall, table for structures in other arease, M is a string with win/loose message | |
| -- set O "otherwall" copy brick places and modify height lowering it if further from the start area | |
| for b in all(W)do add(O,{x=b.x,y=b.y,U=b.U,V=b.V,h=min(4,rnd(8/sqrt(P*P+Q*Q)))\1,s=b.s}) end | |
| W=P|Q==0 and OW or O -- current wall W is either original wall or O | |
| ::_:: -- main loop | |
| print("\^1\^c6") -- flip() cls(grey) | |
| local u,v=(@24396&2)-@24396%2*2,@24396\8%2-@24396\4%2 -- read keys and set u,v direction vectors | |
| local d=1==1 -- d is clear to go (no collision), 1==1 compresses better | |
| for b in all(W)do -- draw ground | |
| fillp(23130) -- init dither patter for shadow | |
| for i=1,b.h*4 do -- for each brick place that has height draw ovals to the right | |
| ovalfill(b.x+i,b.y-5,b.x+i+8,b.y,109) -- shadow uses 6*13+6 color | |
| end -- | |
| fillp() -- reset fill pattern | |
| if(b.s>0)pset(b.x,b.y,13) -- draw single pixels at places where bricks can be laid | |
| end -- | |
| for j=0,1do -- draw wall and person | |
| for b in all(W)do -- two iterations 0) bricks above + person 2) bricks below | |
| if(b.h>0and ((j<1and b.y<y)or(j>0and b.y>=y)))then -- draw only if brick place has positive height (some bricks are actually there) | |
| for h=0,b.h*bh-bh,bh do -- draw each brick layer up to b.h, but jump from 0 to b.h*bh with bh step which is brick height | |
| local U,V,K,L=-b.V*bw,b.U*bw/4,0,0 -- set some local vars U,V are brick direction vector, K,L are brick shift default to no shifting | |
| if(h\bh%2<b.s)K,L=U,V -- if brick should be shifted copy U,V to K,L | |
| for f=-sgn(b.V),sgn(b.V)/2+.5,sgn(b.V) do -- loop to draw brick depth, however this draws depending on the angle of the brick | |
| -- which is taken from b.V which is a sine | |
| -- so 2 possible for-loops here for f=-1,0,1 or f=0,1,1 | |
| X,Y=b.x+K+f*b.U,b.y+L+f*b.V -- X,Y holds brick center and is shifted and translated by depth | |
| for g=0,bh do -- draw bh brick lines | |
| line(X-U,Y-V-h-g,X+U,Y+V-h-g,g%bh==0and 1 or 3) -- first and last lines have color 1 (dark red) the ones in middle are normal (red) | |
| end -- | |
| line(X-U,Y-V-h-bh-1,X+U,Y+V-h-bh-1,4) -- draw top of the brick with lighter color | |
| line(X-U,Y-V-h,X-U,Y-V-h-bh,1) -- draw two left and right side od the brick with dark red | |
| line(X+U,Y+V-h,X+U,Y+V-h-bh) -- | |
| end -- | |
| end -- | |
| end -- | |
| c = -1 -- assume no collision at all | |
| if(abs(x+u-b.x)*.9+abs(y+v-b.y)*2<6)c=b.h -- check for collision and if so set c to collding brick place b.h | |
| if(c>0and b.s==0and l==0 and P|Q==0)l=1 b.h-=1print("\as1xzc0") -- if there is collision, and it is stack, and person hold nothing, and it is start area | |
| -- then hold brick, lower brick place height and play sound | |
| if(c>=0and b.s==1and b.h<4 and l==1)l=0 b.h+=1print("\as1xzc1") T+=.25 -- if this is brick place of possible wall place it here and increase T counter | |
| if(j<1)rect(x-1,y-4,x+1,y-9,0)line(x,y-4,x,y-11)for i=-1,1,2do line(x+i,y-3,x+i+u*i*sin(t()*3),y+2*v*i*sin(t()*3))end | |
| -- if it is our 0 iteration then draw the person torso, head, legs | |
| if(l>0and j<1)rectfill(x,y-8,x+bw,y-8+bh,3)rect(x,y-8,x+bw,y-8+bh,1) -- and if person holds brick draw it as well | |
| d=d and c<1 -- make sure person collided with nothing | |
| end -- | |
| end -- | |
| print(M,64,16,10) -- print win/loose message | |
| if(d)x+=u y+=v -- if there is no collision move the person | |
| -- if person wanders far off the screen change P,Q area coordinates and initialize current area | |
| if(abs(x-64)>320or abs(y-64)>320)P+=(x-64+320)\640Q+=(y-64+320)\640x%=128y%=128goto __ | |
| if(T>=N)M="\-1\-1\-1wall built, enjoy safety" -- if T total blick places counter hits N then wall is built so person can live in peace | |
| if(abs(P)>7or abs(Q)>7)then -- exploring far enough will trigger second ending | |
| M="\-8\n\n\f0|\+ci#\+ckm" -- here it is | |
| if(abs(x-64)+abs(y-40)<8)M="\-8hello\n\n\f0|\+ci#\+ckm" -- and a message if one comes close enough | |
| end -- | |
| goto _ -- loop ends, like most things |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment