kconner

macOS Internals

Understand your Mac and iPhone more deeply by tracing the evolution of Mac OS X from prelease to Swift. John Siracusa delivers the details.

Starting Points

How to use this gist

You've got two main options:

dougallj

# IDA (disassembler) and Hex-Rays (decompiler) plugin for Apple AMX
#
# WIP research. (This was edited to add more info after someone posted it to
# Hacker News. Click "Revisions" to see full changes.)
#
# Copyright (c) 2020 dougallj


# Based on Python port of VMX intrinsics plugin:
# Copyright (c) 2019 w4kfu - Synacktiv

m-radzikowski

#!/usr/bin/env bash

set -Eeuo pipefail
trap cleanup SIGINT SIGTERM ERR EXIT

script_dir=$(cd "$(dirname "${BASH_SOURCE[0]}")" &>/dev/null && pwd -P)

usage() {
  cat <<EOF
Usage: $(basename "${BASH_SOURCE[0]}") [-h] [-v] [-f] -p param_value arg1 [arg2...]

erincandescent

Foreward

This document was originally written several years ago. At the time I was working as an execution core verification engineer at Arm. The following points are coloured heavily by working in and around the execution cores of various processors. Apply a pinch of salt; points contain varying degrees of opinion.

It is still my opinion that RISC-V could be much better designed; though I will also say that if I was building a 32 or 64-bit CPU today I'd likely implement the architecture to benefit from the existing tooling.

Mostly based upon the RISC-V ISA spec v2.0. Some updates have been made for v2.2

Original Foreword: Some Opinion

The RISC-V ISA has pursued minimalism to a fault. There is a large emphasis on minimizing instruction count, normalizing encoding, etc. This pursuit of minimalism has resulted in false orthogonalities (such as reusing the same instruction for branches, calls and returns) and a requirement for superfluous instructions which impacts code density both in terms of size and

tintoy

#!/usr/bin/env python3

import os
import paramiko

ssh_key_filename = os.getenv('HOME') + '/.ssh/id_rsa'

jumpbox_public_addr = '168.128.52.199'
jumpbox_private_addr = '10.0.5.10'
target_addr = '10.0.5.20'

projetsdiy

# Scanner i2c en MicroPython | MicroPython i2c scanner
# Renvoi l'adresse en decimal et hexa de chaque device connecte sur le bus i2c
# Return decimal and hexa adress of each i2c device
# https://projetsdiy.fr - https://diyprojects.io (dec. 2017)

import machine
i2c = machine.I2C(scl=machine.Pin(5), sda=machine.Pin(4))

print('Scan i2c bus...')
devices = i2c.scan()

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

christopherdro

I would like to propose a lightning talk for the Reactive Conference demonstrating how you can interact with Arduino and/or Raspberry Pi GPIO's using React Native.

Here's is an example video where fellow speaker Brent Vatne controls my arduino device remotely using a sample react native app that can be found here

Thank you, @christopherdro

Yawning

// To the extent possible under law, the Yawning Angel has waived all copyright
// and related or neighboring rights to orhttp_example, using the creative
// commons "cc0" public domain dedication. See LICENSE or
// <http://creativecommons.org/publicdomain/zero/1.0/> for full details.

package main

import (
	// Things needed by the actual interface.
	"golang.org/x/net/proxy"

paulirish

/* bling.js */
window.$ = document.querySelector.bind(document);
window.$$ = document.querySelectorAll.bind(document);
Node.prototype.on = window.on = function(name, fn) { this.addEventListener(name, fn); };
NodeList.prototype.__proto__ = Array.prototype;
NodeList.prototype.on = function(name, fn) { this.forEach((elem) => elem.on(name, fn)); };