Upload data from Home Assistant to the CWOP.

cwop_upload.yaml

blueprint:
  name: 'CWOP Upload'
  description: >
    Upload data from Home Assistant to the CWOP.

    Config:
      The sensor_* variables are the sensors whos data will be uploaded.
      The trigger_entities variable specifies the entries to trigger state changes on (this could be a list).

    The script "/config/blueprints/automation/sean6541/send_tcp.sh" must be executable and contain the following:
      #!/bin/bash
      printf "$3" | nc "$1" "$2"

    The send_tcp service must exist in Home Assistant.
    This can be configured with the following YAML:
      shell_command:
        send_tcp: '/config/blueprints/automation/sean6541/send_tcp.sh {{ host }} {{ port }} "{{ packet }}"'

  domain: automation
  input:
    send_tcp_service:
      name: 'Send TCP Service'
      description: 'The send_tcp service to execute.'
      selector:
        text:
      default: 'shell_command.send_tcp'
    host:
      name: 'APRS Internet Service (APRS-IS) Host'
      selector:
        text:
      default: 'cwop.aprs.net'
    port:
      name: 'Port (DONT CHANGE THIS)'
      selector:
        text:
      default: '14580'
    callsign:
      name: 'CWOP Callsign'
      selector:
        text:
      default: ''
    station:
      name: 'Station Type'
      description: '2–4 character code for the type of weather station unit.'
      selector:
        text:
      default: ''
    lat:
      name: 'Station Latitude (APRS-Compliant Format)'
      selector:
        text:
      default: ''
    lon:
      name: 'Station Longitude (APRS-Compliant Format)'
      selector:
        text:
      default: ''
    trigger_entities:
      name: 'Trigger Entities'
      selector:
        entity:
      default: ''
    delay:
      name: 'Delay After Uploading'
      selector:
        number:
          min: 0
          max: 300
          step: 1
          unit_of_measurement: seconds
          mode: slider
      default: 10
    sensor_winddir:
      name: 'Wind Direction Sensor'
      description: 'Must report direction in degrees.'
      selector:
        entity:
      default: ''
    sensor_windspeed:
      name: 'Wind Speed Sensor'
      selector:
        entity:
      default: ''
    sensor_windgust:
      name: 'Wind Gust Sensor'
      selector:
        entity:
      default: ''
    sensor_temp:
      name: 'Temperature Sensor'
      selector:
        entity:
      default: ''
    sensor_hrrain:
      name: 'Rainfall Last Hour Sensor'
      selector:
        entity:
      default: ''
    sensor_twentyfourhrrain:
      name: 'Rainfall Last 24 Hours Sensor'
      selector:
        entity:
      default: ''
    sensor_dayrain:
      name: 'Rainfall Since Midnight Sensor'
      selector:
        entity:
      default: ''
    sensor_humidity:
      name: 'Humidity Sensor'
      selector:
        entity:
      default: ''
    sensor_pressure:
      name: 'Barometric Pressure Sensor'
      selector:
        entity:
      default: ''
    sensor_luminosity:
      name: 'Luminosity Sensor (W/m2)'
      selector:
        entity:
      default: ''

mode: single
max_exceeded: silent

trigger:
  - platform: state
    entity_id: !input trigger_entities

variables:
  host: !input host
  port: !input port
  callsign: !input callsign
  station: !input station
  lat: !input lat
  lon: !input lon
  delay: !input delay
  sensor_winddir: !input sensor_winddir
  sensor_windspeed: !input sensor_windspeed
  sensor_windgust: !input sensor_windgust
  sensor_temp: !input sensor_temp
  sensor_hrrain: !input sensor_hrrain
  sensor_twentyfourhrrain: !input sensor_twentyfourhrrain
  sensor_dayrain: !input sensor_dayrain
  sensor_humidity: !input sensor_humidity
  sensor_pressure: !input sensor_pressure
  sensor_luminosity: !input sensor_luminosity
  time: >
    {% set utc_time = utcnow() %}
    {{ '%02d' | format(utc_time.hour | int) }}{{ '%02d' | format(utc_time.minute | int) }}{{ '%02d' | format(utc_time.second | int) }}
  winddir: >
    {% if sensor_winddir == '' %}
      _...
    {% else %}
      {% set value = states(sensor_winddir) %}
      _{{
        '...' if value in ('unavailable', 'unknown')
        else '%03d' | format(value | float | round | int)
      }}
    {% endif %}
  windspeed: >
    {% if sensor_windspeed == '' %}
      /...
    {% else %}
      {% set value = states(sensor_windspeed) %}
      {% set unit_of_measurement = state_attr(sensor_windspeed, 'unit_of_measurement') %}
      /{{
        '...' if value in ('unavailable', 'unknown')
        else '%03d' | format(((value | float) * (0.6213 if unit_of_measurement == 'km/h' else 1)) | round | int)
      }}
    {% endif %}
  windgust: >
    {% if sensor_windgust == '' %}
      g...
    {% else %}
      {% set value = states(sensor_windgust) %}
      {% set unit_of_measurement = state_attr(sensor_windgust, 'unit_of_measurement') %}
      g{{
        '...' if value in ('unavailable', 'unknown')
        else '%03d' | format(((value | float) * (0.6213 if unit_of_measurement == 'km/h' else 1)) | round | int)
      }}
    {% endif %}
  temp: >
    {% if sensor_temp == '' %}
      t...
    {% else %}
      {% set value = states(sensor_temp) %}
      {% set unit_of_measurement = state_attr(sensor_temp, 'unit_of_measurement') %}
      t{{
        '...' if value in ('unavailable', 'unknown')
        else '%03d' | format(value | float | round | int) if unit_of_measurement == '°F'
        else '%03d' | format((((value | float) * 1.8) + 32) | round | int)
      }}
    {% endif %}
  hrrain: >
    {% if sensor_hrrain == '' %}
      r...
    {% else %}
      {% set value = states(sensor_hrrain) %}
      {% set unit_of_measurement = state_attr(sensor_hrrain, 'unit_of_measurement') %}
      r{{
        '...' if value in ('unavailable', 'unknown')
        else '%03d' | format((((value | float) / (25.4 if unit_of_measurement == 'mm' else 1)) * 100) | round | int)
      }}
    {% endif %}
  twentyfourhrrain: >
    {% if sensor_twentyfourhrrain == '' %}
      p...
    {% else %}
      {% set value = states(sensor_twentyfourhrrain) %}
      {% set unit_of_measurement = state_attr(sensor_twentyfourhrrain, 'unit_of_measurement') %}
      p{{
        '...' if value in ('unavailable', 'unknown')
        else '%03d' | format((((value | float) / (25.4 if unit_of_measurement == 'mm' else 1)) * 100) | round | int)
      }}
    {% endif %}
  dayrain: >
    {% if sensor_dayrain == '' %}
      P...
    {% else %}
      {% set value = states(sensor_dayrain) %}
      {% set unit_of_measurement = state_attr(sensor_dayrain, 'unit_of_measurement') %}
      P{{
        '...' if value in ('unavailable', 'unknown')
        else '%03d' | format((((value | float) / (25.4 if unit_of_measurement == 'mm' else 1)) * 100) | round | int)
      }}
    {% endif %}
  humidity: >
    {% if sensor_humidity == '' %}
      h..
    {% else %}
      {% set value = states(sensor_humidity) %}
      {% if value in ('unavailable', 'unknown') %}
        h..
      {% else %}
        {% set filtered_value = value | float | round | int %}
        h{{
          '..' if filtered_value < 1 else '00' if filtered_value == 100 else '%02d' | format(filtered_value)
        }}
      {% endif %}
    {% endif %}
  pressure: >
    {% if sensor_pressure == '' %}
      b.....
    {% else %}
      {% set value = states(sensor_pressure) %}
      {% set unit_of_measurement = state_attr(sensor_pressure, 'unit_of_measurement') %}
      b{{
        '.....' if value in ('unavailable', 'unknown')
        else '%05d' | format(((value | float) * 338.639) | round | int) if unit_of_measurement not in ['mbar', 'hPa']
        else '%05d' | format(((value | float) * 10) | round | int)
      }}
    {% endif %}
  luminosity: >
    {% if sensor_luminosity == '' %}
      L...
    {% else %}
      {% set value = states(sensor_luminosity) %}
      {% set unit_of_measurement = state_attr(sensor_luminosity, 'unit_of_measurement') %}
      {% if value in ('unavailable', 'unknown') %}
        L...
      {% else %}
        {% set converted_value = ((value | float) / (126.7 if unit_of_measurement == 'lux' else 1)) | round | int %}
        {% if converted_value < 1000 %}
          L{{ '%03d' | format(converted_value) }}
        {% else %}
          l{{ '%03d' | format(converted_value - 1000) }}
        {% endif %}
      {% endif %}
    {% endif %}

action:
  - alias: 'Upload'
    if: >
      {{
        host != ''
        and port != ''
        and callsign != ''
        and lat != ''
        and lon != ''
      }}
    then:
      - service: !input send_tcp_service
        data:
          host: !input host
          port: !input port
          packet: 'user {{ callsign }} pass -1 vers Python\n{{ callsign }}>APRS,TCPIP*:/{{ time }}h{{ lat }}/{{ lon }}{{ winddir }}{{ windspeed }}{{ windgust }}{{ temp }}{{ hrrain }}{{ twentyfourhrrain }}{{ dayrain }}{{ humidity }}{{ pressure }}{{ luminosity }}{{ station }}\n'
  - alias: 'Wait To Prevent Multiple Uploads'
    delay:
      seconds: '{{ delay | int }}'

I attempted setup of this Blueprint today, and I've got the send_tcp.sh script in the correct directory, but I am still getting the following error: Error: [Errno 2] No such file or directory: '\\config\\blueprints\\automation\\sean6541\\send_t cp.sh'

Here is my shell command: shell_command: send_tcp: '/config/blueprints/automation/sean6541/send_tcp.sh {{ host }} {{ port }} "{{ packet }}"'

And here is in the send_tcp.sh file:
#!/bin/bash printf "$3" | nc "$1" "$2"

EDIT: I was able to get the below error fixed, the command "bash" needs to be used and I changed my directory as well. This is working: shell_command: send_tcp: 'bash /share/cwop_upload/send_tcp.sh {{ host }} {{ port }} "{{ packet }}"'

However I am now unsure if my data is actually making it to the CWOP servers.