-
-
Save srlemke/73850b6dad8f98046a6852ac4df021f4 to your computer and use it in GitHub Desktop.
#Tutorial Date: 12/12/2024 | |
#This is for: 211500 (ACC), if you are installing for another game use that game ID | |
#If not raceroom, find game id with bellow command: | |
grep name ~/.steam/steam/steamapps/appmanifest_* | |
------------ | |
Install protontricks and winetricks on your distro. | |
Install dotnet48 into the game vessel. 211500(raceroom) in this example, to install dotnet48: | |
-> All commands are as normal user (never root) | |
WINEPREFIX=~/.steam/steam/steamapps/compatdata/805550/pfx winetricks -q dotnet48 | |
After dotnet48 installed, launch Crewchief installer: | |
protontricks-launch Downloads/CrewChiefV4.msi | |
On the window that opens select the game you installed dotnet48 for and finish the installation normally. | |
I usually run the new installed Crewchief with: | |
protontricks-launch --appid 805550 ~/.steam/steam/steamapps/compatdata/805550/pfx/drive_c/Program\ Files\ \(x86\)/Britton\ IT\ Ltd/CrewChiefV4/CrewChiefV4.exe | |
-> Disable naudio. | |
-> Also make sure in the CrewChief prefs you are using nAudio for playback with “WASAPI” | |
interface type. Otherwise CrewChief works for a few minutes and then hangs. | |
######################################## | |
Raceroom tips, not related to crew chief: | |
######################################## | |
Adjust FOV on the chasecam: | |
<fovScale type="float32">0.73000002</fovScale> | |
Documents\My Games\SimBin\RaceRoom Racing Experience\UserData\graphics_options.xml | |
This makes the chase cam to have FOV 73 | |
------------------------------------------------------------------------------------------ | |
Game not starting due to shaders build failure: | |
In Steam settings, 'Shader pre caching' menu option, disable all. | |
------------------------------------------------------------------------------------------ | |
Start over: | |
You can always reset the WINEPREFIX that the game runs in: | |
For example raceroom, (each game has its own number) | |
/home/slemke/.steam/steam/steamapps/compatdata/211500 | |
So move it, like to 211500BKP and start the game, then a 'vanilla' 211500 is created. | |
Your game settings still are in 211500BKP so you can restore what you want. | |
------------------------------------------------------------------------------------------ | |
#My Steam raceroom launch command(mangohud needs to be installed. | |
#In Crewchief option enable raceroom HUD): | |
DXVK_HUD=version mangohud %command% -cefNoD3D11 -cefNoBlacklist -webHudUrl=https://otterhud.github.io/ | |
----------------------------------------------------------------------------------------- |
I ask you a last favor:
I am thinking that the problem is in the crewchief settings and I would like to make a comparison with your settings.
Even if you don't play Rfactor2, I would like to know your installation paths that are shown in the crewchief settings:
Does tiny pedal work fine for you ? that would rule out any issue with the shared memory.
If it installs and starts fine, just does not work on the game, make sure this line is correct:
protontricks-launch --appid 805550 ~/.steam/steam/steamapps/compatdata/805550/pfx/drive_c/Program\ Files\ (x86)/Britton\ IT\ Ltd/CrewChiefV4/CrewChiefV4.exe
Especifically the gameid that you can get with:
grep name ~/.steam/steam/steamapps/appmanifest_*
Note that the gameid is used 2 times on the launch command.
this one: https://github.com/s-victor/TinyPedal
@lucada30
For rF2 Shared Memory: check out https://github.com/schlegp/rF2SharedMemoryMapPlugin_Wine
Thanks! this works fine, although the crewchief window freezes a lot. It still works with the window frozen but you can't change any setting. I've disabled naudio as suggested but that didn't help. The weird thing is, when I close my game (rF2) the window goes back to life
@lucada30 For rF2 Shared Memory: check out https://github.com/schlegp/rF2SharedMemoryMapPlugin_Wine
I'm using the original SharedMemoryMapPlugin and it seems to work fine under Wine. What's the difference in using that version?
In RFactor2 it should be under ‘System’.