Skip to content

Instantly share code, notes, and snippets.

View timothycarambat's full-sized avatar

Timothy Carambat timothycarambat

627 followers · 39 following
View GitHub Profile
@Ayke
Ayke / cuda-wsl2-ubuntu.md
Last active May 27, 2025 05:20
Everything About CUDA in WSL2 Ubuntu

Prerequisites, i.e. the most important things

  1. Time of writing: Jan 18, 2023, updated on Sep 22, 2024. The following assumes that you're trying to install CUDA on WSL2 Ubuntu.

  2. Check support matrix first before you install any version of CUDA, because chances are the latest CUDA does not have cuDNN support yet, then you would have to re-install older version if you found out later.

    https://docs.nvidia.com/deeplearning/cudnn/support-matrix/index.html#cudnn-cuda-hardware-versions

    At the time of writing, the latest cuDNN version is 8.7 and it supports CUDA 11.8.

  3. Windows 10 must be build 20145 or later, or you should be on Windows 11.

@diogocapela
diogocapela / moment-js-timezones.txt
Created September 7, 2018 00:10
List of All Moment.js Timezones
Africa/Abidjan
Africa/Accra
Africa/Addis_Ababa
Africa/Algiers
Africa/Asmara
Africa/Asmera
Africa/Bamako
Africa/Bangui
Africa/Banjul
Africa/Bissau
@jongrover
jongrover / kiosk-pi.txt
Last active December 3, 2023 21:45
How to Kiosk Raspberry Pi
Software for the Project:
Raspbian Wheezy Debian Linux
Win32Disk Imager
The CanaKit comes with a pre-loaded SD card that includes the same version of Debian Wheezy that I used for this project. However, in an effort to get a little more speed out of the system, I used the 95MB/s Sandisk extreme listed above. It seemed to help, but I did not bench mark it beyond observation.
Anyway, lets get down to building a Raspberry Pi Web Kiosk.
Step 0: Get all of the hardware.
Step 1: Get all of the software.