Turn off sensord false alarm.

after.out

nct6779-isa-0290
Adapter: ISA adapter
Vcore:                 512.00 mV (min =  +0.00 V, max =  +1.74 V)
AVCC:                    3.31 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:                   3.31 V  (min =  +2.98 V, max =  +3.63 V)
3VSB:                    3.44 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:                    3.26 V  (min =  +2.70 V, max =  +3.63 V)
in9:                     0.00 V  (min =  +0.00 V, max =  +0.00 V)
fan1:                   940 RPM  (min =    0 RPM)
fan2:                  1433 RPM  (min =    0 RPM)
fan3:                     0 RPM  (min =    0 RPM)
fan4:                     0 RPM  (min =    0 RPM)
fan5:                     0 RPM  (min =    0 RPM)
CPUTIN:                 +39.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
AUXTIN0:                +14.5°C    sensor = thermistor
AUXTIN1:                +29.0°C    sensor = thermistor
AUXTIN2:                +22.0°C    sensor = thermistor
AUXTIN3:                -26.0°C    sensor = thermistor
SMBUSMASTER 0:          +52.0°C
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C
PCH_CHIP_TEMP:           +0.0°C
PCH_CPU_TEMP:            +0.0°C
beep_enable:           disabled

nouveau-pci-0a00
Adapter: PCI adapter
fan1:         478 RPM
temp1:        +39.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

previous.out

nct6779-isa-0290

Adapter: ISA adapter
Vcore:                 512.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                     1.27 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
AVCC:                    3.31 V  (min =  +2.98 V, max =  +3.63 V)
+3.3V:                   3.31 V  (min =  +2.98 V, max =  +3.63 V)
in4:                     1.85 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                     1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                     1.22 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
3VSB:                    3.44 V  (min =  +2.98 V, max =  +3.63 V)
Vbat:                    3.26 V  (min =  +2.70 V, max =  +3.63 V)
in9:                     0.00 V  (min =  +0.00 V, max =  +0.00 V)
in10:                  936.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                    1.07 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                    1.67 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                  320.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                    1.83 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                  9820 RPM  (min =    0 RPM)
fan2:                  1459 RPM  (min =    0 RPM)
fan3:                     0 RPM  (min =    0 RPM)
fan4:                     0 RPM  (min =    0 RPM)
fan5:                     0 RPM  (min =    0 RPM)
SYSTIN:                 +35.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor = thermistor
CPUTIN:                 +39.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
AUXTIN0:                +14.5°C    sensor = thermistor
AUXTIN1:                +29.0°C    sensor = thermistor
AUXTIN2:                +22.0°C    sensor = thermistor
AUXTIN3:                -26.0°C    sensor = thermistor
SMBUSMASTER 0:          +58.0°C
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C
PCH_CHIP_TEMP:           +0.0°C
PCH_CPU_TEMP:            +0.0°C
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled

nouveau-pci-0a00
Adapter: PCI adapter
fan1:         498 RPM
temp1:        +39.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

sensors3.conf

#!vim /etc/sensors3.conf

chip "w83627ehf-*" "w83627dhg-*" "w83667hg-*" "nct6775-*" "nct6776-*" \
     "nct6779-*" "nct6791-*" "nct6795-*" "nct6796-*"

    label in0 "Vcore"
    label in2 "AVCC"
    label in3 "+3.3V"
    label in7 "3VSB"
    label in8 "Vbat"

    ignore in1
    ignore in4
    ignore in5
    ignore in6
    ignore in10
    ignore in11
    ignore in12
    ignore in13
    ignore in14

    set in2_min  3.3 * 0.90
    set in2_max  3.3 * 1.10
    set in3_min  3.3 * 0.90
    set in3_max  3.3 * 1.10
    set in7_min  3.3 * 0.90
    set in7_max  3.3 * 1.10
    set in8_min  3.0 * 0.90
    set in8_max  3.3 * 1.10

    ignore temp1
    ignore intrusion0
    ignore intrusion1