whitemike889 · August 7, 2020 08:23
diff --git a/adb devices b/adb devices
 [root@cobalt android-ndk-r10e]# adb
 Android Debug Bridge version 1.0.32

 -a                            - directs adb to listen on all interfaces for a connection
 -d                            - directs command to the only connected USB device
                                 returns an error if more than one USB device is present.
 -e                            - directs command to the only running emulator.
                                 returns an error if more than one emulator is running.
 -s <specific device>          - directs command to the device or emulator with the given
                                 serial number or qualifier. Overrides ANDROID_SERIAL
                                 environment variable.
 -p <product name or path>     - simple product name like 'sooner', or
                                 a relative/absolute path to a product
                                 out directory like 'out/target/product/sooner'.
                                 If -p is not specified, the ANDROID_PRODUCT_OUT
                                 environment variable is used, which must
                                 be an absolute path.
 -H                            - Name of adb server host (default: localhost)
 -P                            - Port of adb server (default: 5037)
 devices [-l]                  - list all connected devices
                                 ('-l' will also list device qualifiers)
 connect <host>[:<port>]       - connect to a device via TCP/IP
                                 Port 5555 is used by default if no port number is specified.
 disconnect [<host>[:<port>]]  - disconnect from a TCP/IP device.
                                 Port 5555 is used by default if no port number is specified.
                                 Using this command with no additional arguments
                                 will disconnect from all connected TCP/IP devices.

 device commands:
  adb push [-p] <local> <remote>
                               - copy file/dir to device
                                 ('-p' to display the transfer progress)
  adb pull [-p] [-a] <remote> [<local>]
                               - copy file/dir from device
                                 ('-p' to display the transfer progress)
                                 ('-a' means copy timestamp and mode)
  adb sync [ <directory> ]     - copy host->device only if changed
                                 (-l means list but don't copy)
                                 (see 'adb help all')
  adb shell                    - run remote shell interactively
  adb shell <command>          - run remote shell command
  adb emu <command>            - run emulator console command
  adb logcat [ <filter-spec> ] - View device log
  adb forward --list           - list all forward socket connections.
                                 the format is a list of lines with the following format:
                                    <serial> " " <local> " " <remote> "\n"
  adb forward <local> <remote> - forward socket connections
                                 forward specs are one of: 
                                   tcp:<port>
                                   localabstract:<unix domain socket name>
                                   localreserved:<unix domain socket name>
                                   localfilesystem:<unix domain socket name>
                                   dev:<character device name>
                                   jdwp:<process pid> (remote only)
  adb forward --no-rebind <local> <remote>
                               - same as 'adb forward <local> <remote>' but fails
                                 if <local> is already forwarded
  adb forward --remove <local> - remove a specific forward socket connection
  adb forward --remove-all     - remove all forward socket connections
  adb reverse --list           - list all reverse socket connections from device
  adb reverse <remote> <local> - reverse socket connections
                                 reverse specs are one of:
                                   tcp:<port>
                                   localabstract:<unix domain socket name>
                                   localreserved:<unix domain socket name>
                                   localfilesystem:<unix domain socket name>
  adb reverse --norebind <remote> <local>
                               - same as 'adb reverse <remote> <local>' but fails
                                 if <remote> is already reversed.
  adb reverse --remove <remote>
                               - remove a specific reversed socket connection
  adb reverse --remove-all     - remove all reversed socket connections from device
  adb jdwp                     - list PIDs of processes hosting a JDWP transport
  adb install [-lrtsd] <file>
  adb install-multiple [-lrtsdp] <file...>
                               - push this package file to the device and install it
                                 (-l: forward lock application)
                                 (-r: replace existing application)
                                 (-t: allow test packages)
                                 (-s: install application on sdcard)
                                 (-d: allow version code downgrade)
                                 (-p: partial application install)
  adb uninstall [-k] <package> - remove this app package from the device
                                 ('-k' means keep the data and cache directories)
  adb bugreport                - return all information from the device
                                 that should be included in a bug report.

  adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
                               - write an archive of the device's data to <file>.
                                 If no -f option is supplied then the data is written
                                 to "backup.ab" in the current directory.
                                 (-apk|-noapk enable/disable backup of the .apks themselves
                                    in the archive; the default is noapk.)
                                 (-obb|-noobb enable/disable backup of any installed apk expansion
                                    (aka .obb) files associated with each application; the default
                                    is noobb.)
                                 (-shared|-noshared enable/disable backup of the device's
                                    shared storage / SD card contents; the default is noshared.)
                                 (-all means to back up all installed applications)
                                 (-system|-nosystem toggles whether -all automatically includes
                                    system applications; the default is to include system apps)
                                 (<packages...> is the list of applications to be backed up.  If
                                    the -all or -shared flags are passed, then the package
                                    list is optional.  Applications explicitly given on the
                                    command line will be included even if -nosystem would
                                    ordinarily cause them to be omitted.)

  adb restore <file>           - restore device contents from the <file> backup archive

  adb disable-verity           - disable dm-verity checking on USERDEBUG builds
  adb keygen <file>            - generate adb public/private key. The private key is stored in <file>,
                                 and the public key is stored in <file>.pub. Any existing files
                                 are overwritten.
  adb help                     - show this help message
  adb version                  - show version num

 scripting:
  adb wait-for-device          - block until device is online
  adb start-server             - ensure that there is a server running
  adb kill-server              - kill the server if it is running
  adb get-state                - prints: offline | bootloader | device
  adb get-serialno             - prints: <serial-number>
  adb get-devpath              - prints: <device-path>
  adb status-window            - continuously print device status for a specified device
  adb remount                  - remounts the /system and /vendor (if present) partitions on the device read-write
  adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
  adb reboot-bootloader        - reboots the device into the bootloader
  adb root                     - restarts the adbd daemon with root permissions
  adb usb                      - restarts the adbd daemon listening on USB
  adb tcpip <port>             - restarts the adbd daemon listening on TCP on the specified port
 networking:
  adb ppp <tty> [parameters]   - Run PPP over USB.
 Note: you should not automatically start a PPP connection.
 <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
 [parameters] - Eg. defaultroute debug dump local notty usepeerdns

 adb sync notes: adb sync [ <directory> ]
  <localdir> can be interpreted in several ways:

  - If <directory> is not specified, /system, /vendor (if present), and /data partitions will be updated.

  - If it is "system", "vendor" or "data", only the corresponding partition
    is updated.

 environmental variables:
  ADB_TRACE                    - Print debug information. A comma separated list of the following values
                                 1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
  ANDROID_SERIAL               - The serial number to connect to. -s takes priority over this if given.
  ANDROID_LOG_TAGS             - When used with the logcat option, only these debug tags are printed.
 [root@cobalt android-ndk-r10e]# ls
 build              ndk-build      ndk-gdb-py      ndk-which   RELEASE.TXT                tests
 docs               ndk-build.cmd  ndk-gdb.py      platforms   remove-windows-symlink.sh  toolchains
 find-win-host.cmd  ndk-depends    ndk-gdb-py.cmd  prebuilt    samples
 GNUmakefile        ndk-gdb        ndk-stack       README.TXT  sources


 [root@cobalt android-ndk-r10e]# adb devices
 * daemon not running. starting it now on port 5037 *
 * daemon started successfully *
 List of devices attached 
 CB5A1DAL3T	device
	[root@cobalt android-ndk-r10e]# adb
	Android Debug Bridge version 1.0.32

	-a - directs adb to listen on all interfaces for a connection
	-d - directs command to the only connected USB device
	returns an error if more than one USB device is present.
	-e - directs command to the only running emulator.
	returns an error if more than one emulator is running.
	-s <specific device> - directs command to the device or emulator with the given
	serial number or qualifier. Overrides ANDROID_SERIAL
	environment variable.
	-p <product name or path> - simple product name like 'sooner', or
	a relative/absolute path to a product
	out directory like 'out/target/product/sooner'.
	If -p is not specified, the ANDROID_PRODUCT_OUT
	environment variable is used, which must
	be an absolute path.
	-H - Name of adb server host (default: localhost)
	-P - Port of adb server (default: 5037)
	devices [-l] - list all connected devices
	('-l' will also list device qualifiers)
	connect <host>[:<port>] - connect to a device via TCP/IP
	Port 5555 is used by default if no port number is specified.
	disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
	Port 5555 is used by default if no port number is specified.
	Using this command with no additional arguments
	will disconnect from all connected TCP/IP devices.

	device commands:
	adb push [-p] <local> <remote>
	- copy file/dir to device
	('-p' to display the transfer progress)
	adb pull [-p] [-a] <remote> [<local>]
	- copy file/dir from device
	('-p' to display the transfer progress)
	('-a' means copy timestamp and mode)
	adb sync [ <directory> ] - copy host->device only if changed
	(-l means list but don't copy)
	(see 'adb help all')
	adb shell - run remote shell interactively
	adb shell <command> - run remote shell command
	adb emu <command> - run emulator console command
	adb logcat [ <filter-spec> ] - View device log
	adb forward --list - list all forward socket connections.
	the format is a list of lines with the following format:
	<serial> " " <local> " " <remote> "\n"
	adb forward <local> <remote> - forward socket connections
	forward specs are one of:
	tcp:<port>
	localabstract:<unix domain socket name>
	localreserved:<unix domain socket name>
	localfilesystem:<unix domain socket name>
	dev:<character device name>
	jdwp:<process pid> (remote only)
	adb forward --no-rebind <local> <remote>
	- same as 'adb forward <local> <remote>' but fails
	if <local> is already forwarded
	adb forward --remove <local> - remove a specific forward socket connection
	adb forward --remove-all - remove all forward socket connections
	adb reverse --list - list all reverse socket connections from device
	adb reverse <remote> <local> - reverse socket connections
	reverse specs are one of:
	tcp:<port>
	localabstract:<unix domain socket name>
	localreserved:<unix domain socket name>
	localfilesystem:<unix domain socket name>
	adb reverse --norebind <remote> <local>
	- same as 'adb reverse <remote> <local>' but fails
	if <remote> is already reversed.
	adb reverse --remove <remote>
	- remove a specific reversed socket connection
	adb reverse --remove-all - remove all reversed socket connections from device
	adb jdwp - list PIDs of processes hosting a JDWP transport
	adb install [-lrtsd] <file>
	adb install-multiple [-lrtsdp] <file...>
	- push this package file to the device and install it
	(-l: forward lock application)
	(-r: replace existing application)
	(-t: allow test packages)
	(-s: install application on sdcard)
	(-d: allow version code downgrade)
	(-p: partial application install)
	adb uninstall [-k] <package> - remove this app package from the device
	('-k' means keep the data and cache directories)
	adb bugreport - return all information from the device
	that should be included in a bug report.

	adb backup [-f <file>] [-apk\|-noapk] [-obb\|-noobb] [-shared\|-noshared] [-all] [-system\|-nosystem] [<packages...>]
	- write an archive of the device's data to <file>.
	If no -f option is supplied then the data is written
	to "backup.ab" in the current directory.
	(-apk\|-noapk enable/disable backup of the .apks themselves
	in the archive; the default is noapk.)
	(-obb\|-noobb enable/disable backup of any installed apk expansion
	(aka .obb) files associated with each application; the default
	is noobb.)
	(-shared\|-noshared enable/disable backup of the device's
	shared storage / SD card contents; the default is noshared.)
	(-all means to back up all installed applications)
	(-system\|-nosystem toggles whether -all automatically includes
	system applications; the default is to include system apps)
	(<packages...> is the list of applications to be backed up. If
	the -all or -shared flags are passed, then the package
	list is optional. Applications explicitly given on the
	command line will be included even if -nosystem would
	ordinarily cause them to be omitted.)

	adb restore <file> - restore device contents from the <file> backup archive

	adb disable-verity - disable dm-verity checking on USERDEBUG builds
	adb keygen <file> - generate adb public/private key. The private key is stored in <file>,
	and the public key is stored in <file>.pub. Any existing files
	are overwritten.
	adb help - show this help message
	adb version - show version num

	scripting:
	adb wait-for-device - block until device is online
	adb start-server - ensure that there is a server running
	adb kill-server - kill the server if it is running
	adb get-state - prints: offline \| bootloader \| device
	adb get-serialno - prints: <serial-number>
	adb get-devpath - prints: <device-path>
	adb status-window - continuously print device status for a specified device
	adb remount - remounts the /system and /vendor (if present) partitions on the device read-write
	adb reboot [bootloader\|recovery] - reboots the device, optionally into the bootloader or recovery program
	adb reboot-bootloader - reboots the device into the bootloader
	adb root - restarts the adbd daemon with root permissions
	adb usb - restarts the adbd daemon listening on USB
	adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
	networking:
	adb ppp <tty> [parameters] - Run PPP over USB.
	Note: you should not automatically start a PPP connection.
	<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
	[parameters] - Eg. defaultroute debug dump local notty usepeerdns

	adb sync notes: adb sync [ <directory> ]
	<localdir> can be interpreted in several ways:

	- If <directory> is not specified, /system, /vendor (if present), and /data partitions will be updated.

	- If it is "system", "vendor" or "data", only the corresponding partition
	is updated.

	environmental variables:
	ADB_TRACE - Print debug information. A comma separated list of the following values
	1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
	ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
	ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
	[root@cobalt android-ndk-r10e]# ls
	build ndk-build ndk-gdb-py ndk-which RELEASE.TXT tests
	docs ndk-build.cmd ndk-gdb.py platforms remove-windows-symlink.sh toolchains
	find-win-host.cmd ndk-depends ndk-gdb-py.cmd prebuilt samples
	GNUmakefile ndk-gdb ndk-stack README.TXT sources


	[root@cobalt android-ndk-r10e]# adb devices
	* daemon not running. starting it now on port 5037 *
	* daemon started successfully *
	List of devices attached
	CB5A1DAL3T device