wjlafrance

#!/usr/bin/env bb

(use '[clojure.string :as str])

(def sh-newline-indent " \\\n  ")

(defn mk-file-list
    [files]
    (->> files
         (partition 4 4 []) ; providing even an empty padding collection makes partition return non-full slices

wjlafrance

#------------------------------------------------------------------------------
# File:         gpx.fmt
#
# Description:  Example ExifTool print format file to generate a GPX track log
#
# Usage:        exiftool -p gpx.fmt -ee3 FILE [...] > out.gpx
#
# Requires:     ExifTool version 10.49 or later
#
# Revisions:    2010/02/05 - P. Harvey created

wjlafrance

• Promox / QEMU VM, 512MB RAM, 128GB SCSI HD, 1 core pentium
• IBM ThinkPad 600, 128MB RAM, 100GB ATA HD, 1 core pentium 2 (deschutes)

Begin by booting archlinux32-2021.07.16-i486.iso.

Partition the hard disk:

$ fdisk /dev/sda

wjlafrance

# smartctl -a /dev/nvme0
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.13.19-2-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       Samsung SSD 970 EVO Plus 250GB
Serial Number:                      redacted
Firmware Version:                   2B2QEXM7
PCI Vendor/Subsystem ID:            0x144d
IEEE OUI Identifier:                0x002538

wjlafrance

I'm installing Proxmox on an HP ProLiant DL360p Gen8 server, which cannot boot from NVMe. The NVMe drives are each installed on single-slot M.2 adapters in the rear PCIe slots.

1. Install Proxmox as "zfs raid1" (their installer uses wrong terminology) on two NVMe drives. Consider turning compression off. This Proxmox installation will be the actual instance that gets used, but is not currently bootable on this system.
2. Re-run the installer and install Proxmox on a flash drive as a single-drive zfs pool. I used 16GB, not sure if 8GB will suffice.
3. Reboot from the flash drive. This will load grub, but throw an error there are now two pools called rpool and one of them was last imported on another system. You'll be dropped into a BusyBox shell.
4. Import the NVMe-based pool by id. Run zpool import to list available pools, find the pool with two NVMe drives, and run zpool import -f 123456. exit the BusyBox shell, and the system will now boot the Proxmox instance installed in step 1.
5. Grab a Proxmox

wjlafrance

# https://www.dhs.wisconsin.gov/covid-19/data.htm#summary

require 'csv'
data = CSV.read("/home/lafrance/Downloads/COVID-19_Vaccination_Data_by_County.csv")

counties = {}

for line in data do
    county = line[1]
    onedose = line[3]

wjlafrance

phoneHeight = 165;
phoneWidth = 85;

crossarmSize = 8;
crossarmWidth = phoneWidth + crossarmSize * 2 + 2;
crossarmPosition = (phoneHeight - phoneWidth) / 2;

backWidth = 60;
backHeight = 135;
backDepth = 15;

wjlafrance

(5185, 663, 0, 5185, 'Bot Developers -- Useful Information', 'n00blar', '[email protected]', 1041519376, '68.47.226.6', 1, 0, '1048312800', 'This information is from a jump table called in the RecvThreadProc, my brother indulg traced and documented the packets! heh =p<br><br>[code]<br>// jump table called in RecvDataThread to identify the packet type<br><br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;// PKT_GAMEDATA &nbsp;  &nbsp; &nbsp; &nbsp;= 0x00<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;// PKT_CLIENTREQ &nbsp; &nbsp; &nbsp; &nbsp;= 0x03<br>  &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;// PKT_SERVERPING  &nbsp; &nbsp; &nbsp;= 0x05<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;// PKT_SELFPING &nbsp;  &nbsp; &nbsp; &nbsp;= 0x06<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;// PKT_KEEPALIVE &nbsp; &nbsp; &nbsp; &nbsp;= 0x07<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;// PKT_CONNTEST &nbsp;  &nbsp; &nbsp; &nbsp;= 0x08<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;// PKT_CONNTEST2 &nbsp; &nbsp; &nbsp; &n

wjlafrance

import Foundation
import CryptoSwift

enum CheckRevision {

    enum CheckRevisionError: Error {
        case formulaNotBase64
        case formulaTooShort
        case unparseableVersion
    }

wjlafrance

#import <stdio.h>
#import <stdlib.h>

typedef enum {
  heart = 0,
  spade = 1,
  diamond = 2,
  club = 3
} Suit;