Created
June 13, 2012 14:42
-
-
Save ydkn/2924486 to your computer and use it in GitHub Desktop.
adb dmesg output on beagleboard-xm with ics
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
<5>Linux version 2.6.37-g43df1dd (android@android-dev) (gcc version 4.4.3 (GCC) ) #10 Wed Jun 13 15:28:28 CEST 2012 | |
<4>CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f | |
<4>CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
<4>Machine: OMAP3 Beagle Board | |
<6>Reserving 8388608 bytes SDRAM for VRAM | |
<4>Memory policy: ECC disabled, Data cache writeback | |
<6>OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk ) | |
<6>SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000 | |
<7>On node 0 totalpages: 63488 | |
<7>free_area_init_node: node 0, pgdat c05bd35c, node_mem_map c0685000 | |
<7> Normal zone: 512 pages used for memmap | |
<7> Normal zone: 0 pages reserved | |
<7> Normal zone: 62976 pages, LIFO batch:15 | |
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 | |
<7>pcpu-alloc: [0] 0 | |
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62976 | |
<5>Kernel command line: console=ttyO2,115200n8 androidboot.console=ttyO2 mem=256M root=/dev/mmcblk0p3 rw rootfstype=ext4 rootwait noinitrd init=/init ip=off omap_vout.vid1_static_vrfb_alloc=y omapfb.mode=dvi:640x480MR-16 omapdss.def_disp="dvi" vram=8M omapfb.vram=0:8M | |
<6>PID hash table entries: 1024 (order: 0, 4096 bytes) | |
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) | |
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) | |
<6>Memory: 248MB = 248MB total | |
<5>Memory: 244988k/244988k available, 17156k reserved, 0K highmem | |
<5>Virtual kernel memory layout: | |
<5> vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
<5> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
<5> DMA : 0xffc00000 - 0xffe00000 ( 2 MB) | |
<5> vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB) | |
<5> lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) | |
<5> modules : 0xbf000000 - 0xc0000000 ( 16 MB) | |
<5> .init : 0xc0008000 - 0xc003c000 ( 208 kB) | |
<5> .text : 0xc003c000 - 0xc057c000 (5376 kB) | |
<5> .data : 0xc057c000 - 0xc05c2800 ( 282 kB) | |
<6>NR_IRQS:409 | |
<6>Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz | |
<6>Reprogramming SDRC clock to 400000000 Hz | |
<3>dpll3_m2_clk rate change failed: -22 | |
<6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts | |
<6>Total of 96 interrupts on 1 active controller | |
<6>GPMC revision 5.0 | |
<4>Trying to install interrupt handler for IRQ402 | |
<4>Trying to install interrupt handler for IRQ403 | |
<4>Trying to install interrupt handler for IRQ404 | |
<4>Trying to install interrupt handler for IRQ405 | |
<4>Trying to install interrupt handler for IRQ406 | |
<4>Trying to install interrupt handler for IRQ407 | |
<4>Trying to install interrupt handler for IRQ408 | |
<3>Trying to install type control for IRQ409 | |
<3>Trying to set irq flags for IRQ409 | |
<6>OMAP clockevent source: GPTIMER1 at 32768 Hz | |
<4>Console: colour dummy device 80x30 | |
<6>Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720) | |
<6>pid_max: default: 32768 minimum: 301 | |
<6>Security Framework initialized | |
<4>Mount-cache hash table entries: 512 | |
<6>CPU: Testing write buffer coherency: ok | |
<6>regulator: core version 0.5 | |
<6>regulator: dummy: | |
<6>NET: Registered protocol family 16 | |
<6>OMAP GPIO hardware version 2.5 | |
<6>OMAP GPIO hardware version 2.5 | |
<6>OMAP GPIO hardware version 2.5 | |
<6>OMAP GPIO hardware version 2.5 | |
<6>OMAP GPIO hardware version 2.5 | |
<6>OMAP GPIO hardware version 2.5 | |
<6>omap_mux_init: Add partition: #1: core, flags: 0 | |
<6>OMAP3 Beagle Rev: xM C | |
<6>Found NAND on CS0 | |
<6>Registering NAND on CS0 | |
<3>Unable to get DVI reset GPIO | |
<6>hw-breakpoint: debug architecture 0x4 unsupported. | |
<6>OMAP DMA hardware revision 5.0 | |
<4>bio: create slab <bio-0> at 0 | |
<5>SCSI subsystem initialized | |
<6>usbcore: registered new interface driver usbfs | |
<6>usbcore: registered new interface driver hub | |
<6>usbcore: registered new device driver usb | |
<4>omap_device: omap_i2c.1: new worst case activate latency 0: 30517 | |
<6>omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz | |
<6>twl4030: PIH (irq 7) chaining IRQs 368..375 | |
<6>twl4030: power (irq 373) chaining IRQs 376..383 | |
<6>twl4030: gpio (irq 368) chaining IRQs 384..401 | |
<6>regulator: VUSB1V5: 1500 mV normal standby | |
<6>regulator: VUSB1V8: 1800 mV normal standby | |
<6>regulator: VUSB3V1: 3100 mV normal standby | |
<6>twl4030_usb twl4030_usb: Initialized TWL4030 USB module | |
<6>regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby | |
<6>regulator: VDAC: 1800 mV normal standby | |
<6>regulator: VDVI: 1800 mV normal standby | |
<6>regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby | |
<6>regulator: VAUX3: 1800 mV normal standby | |
<6>regulator: VAUX4: 1800 mV normal standby | |
<4>omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517 | |
<6>omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz | |
<6>omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz | |
<6>Advanced Linux Sound Architecture Driver Version 1.0.23. | |
<6>Switching to clocksource 32k_counter | |
<6>musb-hdrc: version 6.0, otg (peripheral+host), debug=0 | |
<6>musb-hdrc musb-hdrc.0: dma type: dma-inventra | |
<7>musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) | |
<7>musb-hdrc: MHDRC RTL version 1.800 | |
<7>musb-hdrc: setup fifo_mode 4 | |
<7>musb-hdrc: 28/31 max ep, 16384/16384 memory | |
<6>musb-hdrc musb-hdrc.0: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 | |
<6>NET: Registered protocol family 2 | |
<6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes) | |
<6>TCP established hash table entries: 8192 (order: 4, 65536 bytes) | |
<6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes) | |
<6>TCP: Hash tables configured (established 8192 bind 8192) | |
<6>TCP reno registered | |
<6>UDP hash table entries: 256 (order: 0, 4096 bytes) | |
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | |
<6>NET: Registered protocol family 1 | |
<4>NetWinder Floating Point Emulator V0.97 (double precision) | |
<6>omap-iommu omap-iommu.0: isp registered | |
<6>AM37x/DM37x Linux PSP version 04.02.00.07 (OMAP3BEAGLE) | |
<6>ashmem: initialized | |
<5>VFS: Disk quotas dquot_6.5.2 | |
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
<6>JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. | |
<6>msgmni has been set to 478 | |
<6>io scheduler noop registered | |
<6>io scheduler deadline registered | |
<6>io scheduler cfq registered (default) | |
<6>OMAP DSS rev 2.0 | |
<6>OMAP DISPC rev 3.0 | |
<6>OMAP VENC rev 2 | |
<6>OMAP DSI rev 1.0 | |
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
<6>omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 | |
<6>omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 | |
<6>omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 | |
<6>console [ttyO2] enabled | |
<6>omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3 | |
<6>brd: module loaded | |
<6>loop: module loaded | |
<3>mtdoops: mtd device (mtddev=name/number) must be supplied | |
<6>omap2-nand driver initializing | |
<4>No NAND device found. | |
<4>No NAND device found. | |
<6>OneNAND driver initializing | |
<6>usbcore: registered new interface driver asix | |
<6>usbcore: registered new interface driver cdc_ether | |
<6>usbcore: registered new interface driver smsc95xx | |
<6>usbcore: registered new interface driver net1080 | |
<6>usbcore: registered new interface driver cdc_subset | |
<6>usbcore: registered new interface driver zaurus | |
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
<4>ehci-omap.0 supply hsusb0 not found, using dummy regulator | |
<4>ehci-omap.0 supply hsusb1 not found, using dummy regulator | |
<6>ehci-omap ehci-omap.0: OMAP-EHCI Host Controller | |
<6>ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 | |
<6>ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 | |
<6>ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 | |
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
<6>usb usb1: Product: OMAP-EHCI Host Controller | |
<6>usb usb1: Manufacturer: Linux 2.6.37-g43df1dd ehci_hcd | |
<6>usb usb1: SerialNumber: ehci-omap.0 | |
<6>hub 1-0:1.0: USB hub found | |
<6>hub 1-0:1.0: 3 ports detected | |
<6>Initializing USB Mass Storage driver... | |
<6>usbcore: registered new interface driver usb-storage | |
<6>USB Mass Storage support registered. | |
<6>android init | |
<6>android_probe pdata: c058bf2c | |
<6>android_bind | |
<7>android_bind_config | |
<6>android_usb gadget: android_usb ready | |
<6>musb-hdrc musb-hdrc.0: MUSB HDRC host driver | |
<6>musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 2 | |
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 | |
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
<6>usb usb2: Product: MUSB HDRC host driver | |
<6>usb usb2: Manufacturer: Linux 2.6.37-g43df1dd musb-hcd | |
<6>usb usb2: SerialNumber: musb-hdrc.0 | |
<6>hub 2-0:1.0: USB hub found | |
<6>hub 2-0:1.0: 1 port detected | |
<6>f_adb init | |
<6>android_register_function adb | |
<6>adb_bind_config | |
<6>f_mass_storage init | |
<6>android_register_function usb_mass_storage | |
<6>mice: PS/2 mouse device common for all mice | |
<6>input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
<6>input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1 | |
<6>using rtc device, twl_rtc, for alarms | |
<6>twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 | |
<4>twl_rtc twl_rtc: Power up reset detected. | |
<6>twl_rtc twl_rtc: Enabling TWL-RTC. | |
<6>i2c /dev entries driver | |
<6>Linux media interface: v0.10 | |
<6>Linux video capture interface: v2.00 | |
<4>omap3isp supply VDD_CSIPHY1 not found, using dummy regulator | |
<4>omap3isp supply VDD_CSIPHY2 not found, using dummy regulator | |
<6>omap3isp omap3isp: Revision 15.0 found | |
<6>omap-iommu omap-iommu.0: isp: version 1.1 | |
<7>omap3isp omap3isp: hist: DMA channel = 0 | |
<7>omap3isp omap3isp: isp_set_xclk(): cam_xclka set to 24685714 Hz | |
<7>mt9v113 2-003c: mt9v113_read_reg reg=0x0, val=0x0 | |
<7>mt9v113 2-003c: chip id detected 0x0 | |
<3>mt9v113 2-003c: chip id mismatch read 0x0, expecting 0x2280 | |
<7>omap3isp omap3isp: isp_set_xclk(): cam_xclka set to 0 Hz | |
<3>isp_register_subdev_group: Unable to register subdev mt9v113 | |
<6>OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec | |
<3>twl4030_wdt twl4030_wdt: Failed to register misc device | |
<4>twl4030_wdt: probe of twl4030_wdt failed with error -16 | |
<6>device-mapper: uevent: version 1.0.3 | |
<6>device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: [email protected] | |
<6>usbcore: registered new interface driver usbhid | |
<6>usbhid: USB HID core driver | |
<6>logger: created 64K log 'log_main' | |
<6>logger: created 256K log 'log_events' | |
<6>logger: created 64K log 'log_radio' | |
<6>logger: created 64K log 'log_system' | |
<6>usbcore: registered new interface driver snd-usb-audio | |
<6>OMAP3 Beagle/Devkit8000 SoC init | |
<6>usb 1-2: new high speed USB device using ehci-omap and address 2 | |
<6>asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok | |
<6>ALSA device list: | |
<6> #0: omap3beagle | |
<6>oprofile: hardware counters not available | |
<6>oprofile: using timer interrupt. | |
<6>TCP cubic registered | |
<6>Initializing XFRM netlink socket | |
<6>NET: Registered protocol family 17 | |
<6>NET: Registered protocol family 15 | |
<5>Registering the dns_resolver key type | |
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 | |
<6>ThumbEE CPU extension supported. | |
<3>Power Management for TI OMAP3. | |
<6>smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized | |
<6>smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized | |
<6>SmartReflex Class3 initialized | |
<6>clock: disabling unused clocks to save power | |
<4>platform mpu.0: omap_voltage_scale: Already at the requestedrate 600000000 | |
<6>fbcvt: 640x480@60: CVT Name - .307M3-R | |
<6>usb 1-2: New USB device found, idVendor=0424, idProduct=9514 | |
<6>usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
<6>hub 1-2:1.0: USB hub found | |
<6>hub 1-2:1.0: 5 ports detected | |
<4>regulator_init_complete: incomplete constraints, leaving VDAC on | |
<6>twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) | |
<6>omap_vout omap_vout: Buffer Size = 3686400 | |
<6>omap_vout omap_vout: : registered and initialized video device 15 | |
<6>omap_vout omap_vout: Buffer Size = 3686400 | |
<6>omap_vout omap_vout: : registered and initialized video device 16 | |
<6>Waiting for root device /dev/mmcblk0p3... | |
<4>mmc0: host does not support reading read-only switch. assuming write-enable. | |
<6>mmc0: new high speed SDHC card at address aaaa | |
<6>mmcblk0: mmc0:aaaa SU04G 3.69 GiB | |
<6> mmcblk0: p1 p2 p3 | |
<6>EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) | |
<4>VFS: Mounted root (ext4 filesystem) on device 179:3. | |
<6>Freeing init memory: 208K | |
<6>usb 1-2.1: new high speed USB device using ehci-omap and address 3 | |
<6>usb 1-2.1: New USB device found, idVendor=0424, idProduct=ec00 | |
<6>usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
<6>smsc95xx v1.0.4 | |
<3>init: cannot open '/initlogo.rle' | |
<6>smsc95xx 1-2.1:1.0: usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 4a:70:6f:1f:15:be | |
<6>EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) | |
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. | |
<3>init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' | |
<6>android_usb gadget: high speed config #1: android | |
<6>enabling adb | |
<6>adb_open | |
<6>adb_release | |
<6>adb_open | |
<6>android_usb gadget: high speed config #1: android | |
<6>request_suspend_state: wakeup (3->0) at 37967407230 (2000-01-01 00:00:34.379608156 UTC) | |
<3>init: untracked pid 964 exited | |
<3>init: untracked pid 971 exited | |
<6>request_suspend_state: wakeup (0->0) at 39853149418 (2000-01-01 00:00:36.265380861 UTC) | |
<3>init: untracked pid 1055 exited | |
<3>init: untracked pid 1056 exited | |
<6>request_suspend_state: wakeup (0->0) at 45487701420 (2000-01-01 00:00:41.899932863 UTC) | |
<3>init: untracked pid 1071 exited | |
<3>init: untracked pid 1072 exited | |
<6>request_suspend_state: wakeup (0->0) at 50024993900 (2000-01-01 00:00:46.437194826 UTC) | |
<3>init: untracked pid 1087 exited | |
<3>init: untracked pid 1088 exited | |
<6>request_suspend_state: wakeup (0->0) at 54615356449 (2000-01-01 00:00:51.027557375 UTC) | |
<3>init: untracked pid 1103 exited | |
<3>init: untracked pid 1104 exited | |
<6>request_suspend_state: wakeup (0->0) at 60182800297 (2000-01-01 00:00:56.595031740 UTC) | |
<3>init: untracked pid 1119 exited | |
<3>init: untracked pid 1120 exited | |
<6>request_suspend_state: wakeup (0->0) at 64776275639 (2000-01-01 00:01:01.188507082 UTC) | |
<3>init: untracked pid 1135 exited | |
<3>init: untracked pid 1136 exited | |
<6>request_suspend_state: wakeup (0->0) at 70345489506 (2000-01-01 00:01:06.757720949 UTC) | |
<3>init: untracked pid 1151 exited | |
<3>init: untracked pid 1152 exited | |
<6>request_suspend_state: wakeup (0->0) at 74931701664 (2000-01-01 00:01:11.343902590 UTC) | |
<3>init: untracked pid 1170 exited | |
<3>init: untracked pid 1171 exited | |
<6>request_suspend_state: wakeup (0->0) at 80525299076 (2000-01-01 00:01:16.937500002 UTC) | |
<3>init: untracked pid 1186 exited | |
<3>init: untracked pid 1187 exited | |
<6>request_suspend_state: wakeup (0->0) at 85127960209 (2000-01-01 00:01:21.540191652 UTC) | |
<3>init: untracked pid 1202 exited | |
<3>init: untracked pid 1203 exited | |
<6>request_suspend_state: wakeup (0->0) at 89674407963 (2000-01-01 00:01:26.086608889 UTC) | |
<3>init: untracked pid 1218 exited | |
<3>init: untracked pid 1219 exited | |
<6>request_suspend_state: wakeup (0->0) at 95260864262 (2000-01-01 00:01:31.673095705 UTC) | |
<3>init: untracked pid 1234 exited | |
<3>init: untracked pid 1235 exited | |
<6>request_suspend_state: wakeup (0->0) at 99825988773 (2000-01-01 00:01:36.238220216 UTC) | |
<3>init: untracked pid 1250 exited | |
<3>init: untracked pid 1251 exited | |
<6>request_suspend_state: wakeup (0->0) at 105398223881 (2000-01-01 00:01:41.810424806 UTC) | |
<3>init: untracked pid 1266 exited | |
<3>init: untracked pid 1267 exited | |
<6>request_suspend_state: wakeup (0->0) at 109966400150 (2000-01-01 00:01:46.378631593 UTC) | |
<3>init: untracked pid 1282 exited | |
<3>init: untracked pid 1283 exited | |
<6>request_suspend_state: wakeup (0->0) at 115561523441 (2000-01-01 00:01:51.973724366 UTC) | |
<3>init: untracked pid 1298 exited | |
<3>init: untracked pid 1299 exited |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment