Joseph Chiocchi yyolk

How to set up a Telegram Proxy (MTProxy)

Telegram proxies can help people connect when Telegram is blocked. Telegram apps support them directly, so sharing a proxy can be as simple as sending someone a link.

I've used MTProxy to run my public Telegram proxy, which you can use if you don't want to set up your own.

A proxy cannot simply decrypt Telegram's encrypted message traffic, but it can observe client IP addresses, connection times, traffic volume and destinations. Its logs may retain that information. MTProxy is not a VPN or an anonymity guarantee, and it does not turn ordinary Telegram cloud chats into end-to-end encrypted Secret Chats. Choose an operator you trust.

Read this before choosing the software

Git Commit Freeze Due to GPG Lock Issues

If you encounter a problem where you cannot commit changes in Git – neither through the terminal nor via the GitHub Desktop application – the issue might be a freeze during the Git commit process. This is often caused by GPG lock issues. Below is a concise and step-by-step guide to resolve this problem.

Solution Steps

1. Check for GPG Lock Messages

Open your terminal and try to perform a GPG operation (like signing a test message). If you see repeated messages like gpg: waiting for lock (held by [process_id]) ..., it indicates a lock issue.

Hyperion + Android Grabber Ambilight Setup Guide

Intro

Usage

run install pip.py, follow instructions

edit pip config that placed in the local root
edit your pythonista_startup.py, add PIP_CONFIG_FILE env

reboot Pythonista
run run.py, then type show pip or freeze

That's all. Now you can (un)install packages, upgrade pip, whatever.

	# Create a new worktree and branch from within current git directory.
	ga() {
	if [[ -z "$1" ]]; then
	echo "Usage: ga [branch name]"
	exit 1
	fi

	local branch="$1"
	local base="$(basename "$PWD")"
	local path="../${base}--${branch}"


	# Spinners


	Perl Spinner/Heartbeat demonstrator (Unicode complaint)

	perl -CO -Mutf8 -e '$\|=1; $c=" ▏▎▍▌▋▊▉█";
	while(1){ for $i ($c=~/(.)/g) {
	print " $i\r"; select(undef,undef,undef,.1+1/length($c)); } };'

	//This is a collection of RTTTLs that can be used with any RTTTL player. Foremost it is for the Ulanzi TC001 LED Matrix.
	//Onlineplayer: https://adamonsoon.github.io/rtttl-play/


	Original1:d=4,o=5,b=140:16e,16g,16a,16c

	//ESPHOME - https://esphome.io/components/rtttl.html
	two_short:d=4,o=5,b=100:16e6,16e6
	long:d=1,o=5,b=100:e6
	siren:d=8,o=5,b=100:d,e,d,e,d,e,d,e

	import mmap


	def get_last_lines(path: str, count: int) -> list[str]:
	"""Get count last lines from a file."""
	with open(path, "r+b") as text_file:
	text_mmap = mmap.mmap(text_file.fileno(), 0, mmap.ACCESS_READ)
	position = len(text_mmap)
	while count and (position := text_mmap.rfind(b"\n", 0, position)) != -1:
	count -= 1

	#------------------------------------------------------------------------------------#
	# PIN Schematics #
	# #
	# GPIO-00 MCU-BOOT #
	# GPIO-01 Speaker Mute-Status #
	# GPIO-02 I2S MCLK #
	# GPIO-03 Touch-Screen TT21100 Interrupt Pin #
	# GPIO-04 ILI92xxx Display DC-Pin (SPI: CLK-Pin) #
	# GPIO-05 ILI92xxx Display CS-Pin (SPI: MOSI-Pin) #
	# GPIO-06 ILI92xxx Display SDA #

	# Raspberry PI OS config.toml
	# This file is used for the initial setup of the system on the first boot, if
	# it's s present in the boot partition of the installation.
	#
	# This file is loaded by firstboot, parsed by init_config and ends up
	# as several calls to imager_custom.
	# The example below has all current fields.
	#
	# References:
	# - https://github.com/RPi-Distro/raspberrypi-sys-mods/blob/master/usr/lib/raspberrypi-sys-mods/firstboot