wifi_esp32_SHTC3_conditional_NeoPixel

wifi_esp32_SHTC3_conditional_NeoPixel.ino

#include "Senses_wifi_esp32.h"
#include "Adafruit_SHTC3.h"
#include <Adafruit_NeoPixel.h>

int led_pin     = 27;
int numPixels   = 1;
int pixelFormat = NEO_GRB + NEO_KHZ800;
Adafruit_NeoPixel *pixels;

int control_port = 1;

const char *ssid    = "your-wifi-network-name";
const char *passw   = "your-wifi-password";
const char *userid  = "your-senses-user-id";
const char *key     = "your-device-key";

String response;
float t, h;

Senses_wifi_esp32 myiot;
Adafruit_SHTC3 shtc3 = Adafruit_SHTC3();

void setup() {
  Serial.begin(115200);

  pixels = new Adafruit_NeoPixel(numPixels, led_pin, pixelFormat);
  pixels->begin();

  if (! shtc3.begin()) {
    Serial.println("Couldn't find SHTC3");
    while (1) delay(1);
  }

  Serial.println("Found SHTC3 sensor");
  response = myiot.connect(ssid, passw, userid, key);
  Serial.println(response);
}

void loop() {
  response = "";

  sensors_event_t humidity, temp;
  shtc3.getEvent(&humidity, &temp);

  t = temp.temperature;
  h = humidity.relative_humidity;

  Serial.println("Temperature is " + String(t) + " celcuis");
  Serial.println("Humidity is " + String(h) + " %RH");
  Serial.println("----------------------------------------");

  response = myiot.send(1, t);
  Serial.println(response);

  response = myiot.send(2, h);
  Serial.println(response);

  response = myiot.getDigitalControl(control_port);
  Serial.println(response);

  if (response == "on")
  {
    pixels->setPixelColor(0, pixels->Color(255, 0, 0));  pixels->show(); delay(500);
  }

  else if (response == "off")
  {
    pixels->clear();  pixels->show();
  }

  delay(1000);
}