Converge F670L Bridge mode

Converge-F670L.md

1. Go to Network - WAN - WAN Connection
2. Right click Type Route dropdown select and click "Inspect" in the context menu.
   In console, run the code below:

   document.getElementById('Frm_mode').options[document.getElementById('Frm_mode').options.selectedIndex].setAttribute('value', 'BRIDGE');
   Change_mode();
   

   
3. Input New Connection Name. Example: Bridge. Click Create.
4. Go to Network - WAN - Port - Binding
   Select the Bridge WAN Connection. Check LAN3. Check other WAN connections and make sure LAN3 is not checked.
5. Connect the WAN connection of your Router to Port3 of the Converge CPE.
6. Configure your router's DHCP client.

Still getting local IP assigned by stock ZTE (PLDT) router, when I do the step below by @marfillaster I do not get ipv4 at all

Try also to set Lan3 to Wan in Network-LAN-DHCP Port Service screen. Not really sure if it has any use though but let me know

Edit: Finally managed to enable the bridge mode on F670L (PLDT) with a lil bit alteration to the steps stated in the guide

Maybe you can share with us what changes you needed to make, to help us like this article helped.

I have this kind of Modem., is the procedure the same?

It works, but you must change it manually and must be bridge lowercase