n-west

n-west

available files:

https://gbfs.capitalbikeshare.com/gbfs/gbfs.json

Use https://gbfs.capitalbikeshare.com/gbfs/en/station_information.json to get station_id from a location

Then use https://gbfs.capitalbikeshare.com/gbfs/en/station_status.json and filter the desired station_id to get its status

n-west

// ==========================================================
// Sony Xperia SIN (Firmware flashable files) analysis
//
// Author: zxz0O0
// Started: 2014-06-05
// Notes: Numbers are big endian
// Credits: Androxyde
// ==========================================================

struct SinFile

n-west

{
    "brief": "A radar toolbox from GSoC '14",
    "contact": {
        "author": "Stefan Wunsch",
        "email": "[email protected]"
    },
    "copyright_owner": "Communications Engineering Lab, KIT",
    "dependencies": [
        "UHD",
        "Qt",

n-west

Common Problems with GNU Radio/VOLK submodules

This is a list of problems that we expect people to run in to when working with GNU Radio and the VOLK submodule. Each problem has a probable cause, the error message, and a solution.

Problem 1

Cause

n-west

#include <iostream>
#include <boost/thread.hpp>

void workerFunc()
{
    std::cout << "Worker: running" << std::endl;
    std::cout << "Worker: finished" << std::endl;
}

int main(int argc, char* argv[])

n-west

## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux-3.5.7
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1786136 Bytes = 1.7 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Starting kernel ...

n-west

U-Boot SPL 2013.07 (Dec 30 2013 - 23:40:26)
i2c_write: pads on bus 0 probably not configured (status=0x10)
i2c_read (addr phase): pads on bus 0 probably not configured (status=0x10)
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img


U-Boot 2013.07 (Dec 30 2013 - 23:40:26)

n-west

class volk_qa_mem_pool
{
    /* QA mem pool returns an aligned and unaligned buffer with sizes
     * of N * itemsize. The buffers do not overlap so that the user
     * need not be concerned about reallocating identical vectors.
     *
     * This class exists mostly to guarantee that allocated buffers 
     * are cleaned up properly on exit
     */
    public:

n-west

| arm-oe-linux-gnueabi-gcc: numpy/linalg/python_xerbla.c
| arm-oe-linux-gnueabi-gcc: numpy/linalg/lapack_litemodule.c
| /usr/bin/gfortran -Wall -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed build/temp.linux-i686-2.7/numpy/linalg/lapack_litemodule.o build/temp.linux-i686-2.7/numpy/linalg/python_xerbla.o -L/usr/lib -L/home/nathan/oe/build/tmp-eglibc/sysroots/zc702-zynq7/usr/lib -Lbuild/temp.linux-i686-2.7 -llapack -lblas -lpython2.7 -lgfortran -o build/lib.linux-i686-2.7/numpy/linalg/lapack_lite.so
| /usr/bin/ld: build/temp.linux-i686-2.7/numpy/linalg/lapack_litemodule.o: Relocations in generic ELF (EM: 40)
| /usr/bin/ld: build/temp.linux-i686-2.7/numpy/linalg/lapack_litemodule.o: Relocations in generic ELF (EM: 40)
| /usr/bin/ld: build/temp.linux-i686-2.7/numpy/linalg/lapack_litemodule.o: Relocations in generic ELF (EM: 40)
| /usr/bin/ld: build/temp.linux-i686-2.7/numpy/linalg/lapack_litemodule.o: Relocations in generic ELF (EM: 40)
| /usr/bin/ld: build/temp.linux-i686-2.7/numpy/linalg/lapack_litemodule.o: Relo