This is a living document. Everything in this document is made in good faith of being accurate, but like I just said; we don't yet know everything about what's going on.
Update: I've disabled comments as of 2025-01-26 to avoid everyone having notifications for something a year on if someone wants to suggest a correction. Folks are free to email to suggest corrections still, of course.
| [SystemSettings] | |
| bAllowShadowMeshGeneration=False | |
| PrimaryWholeSceneShadowSplitSize=2048 | |
| bViewPrePass=False | |
| bAllowShadowFrustumCulling=True | |
| ShadowFrustumCullingAmount=0.075000 | |
| bAllowDecalDotCulling=True | |
| PPDownSampleFactor=6 | |
| MotionBlurSamples=5 | |
| bAllowStereoSpatialization=True |
| This is the lowest I could get audio latency to work on my system (Ryzen 5 5700X, 32GB 3600MHz RAM, RX 6700). | |
| Scavenged as much of the man pages as possible to get a configuration close to what https://blog.thepoon.fr/osuLinuxAudioLatency/ gave. | |
| This has given me no crackling nor lag, but it'll depend on your computer. | |
| Use https://github.com/NelloKudo/osu-winello, export STAGING_AUDIO_DURATION=24000 and STAGING_AUDIO_PERIOD=12000 to start. | |
| Try lower, I've been able to do as low as STAGING_AUDIO_DURATION=3500 and STAGING_AUDIO_PERIOD=7000. | |
| To adjust both STAGING_AUDIO_DURATION and STAGING_AUDIO_DURATION, make sure the PERIOD is a multiply of DURATION | |
| (3500 * 2 = 7000 duration, 4000 * 2 = 8000). This gives the highest chance of it to work. |
This guide is based on multiple guides as well as official instructions for the other boards found on the Internet:
I have gone through all these steps recently and got a working board with my favorite Arch Linux ARM. I hope it will be helpful for someone else.
| #!/bin/bash | |
| echo Adding microphone to Pulseaudio | |
| grep -qxF 'load-module module-alsa-source device=hw:0,99' /etc/pulse/default.pa || echo 'load-module module-alsa-source device=hw:0,99' >> /etc/pulse/default.pa | |
| echo Adding headphone to Pulseaudio | |
| grep -qxF 'load-module module-alsa-sink device=hw:0,1' /etc/pulse/default.pa || echo 'load-module module-alsa-sink device=hw:0,1' >> /etc/pulse/default.pa | |
| echo Adding headset microphone to Pulseaudio |
| # /etc/udev/rules.d/90-dualsense-no-touchpad-input.rules | |
| ACTION=="add|change", KERNEL=="event[0-9]*", ATTRS{name}=="*Wireless Controller Touchpad", ENV{LIBINPUT_IGNORE_DEVICE}="1" |
Opening up No Man's Sky, SteamVR pops up an error that says wrong video card please plug your headset into the same graphics card as your primary monitor.
SteamVR stays stuck showing "up next" with the No Man's Sky logo in their waiting room, and No Man's Sky starts working on is own screen (with a view per eye) but never goes to the headset.
Note that this does not happen for any other VR app on my computer.
| # ALSA monitor config file for PipeWire version "0.3.28" # | |
| properties = { | |
| # Create a JACK device. This is not enabled by default because | |
| # it requires that the PipeWire JACK replacement libraries are | |
| # not used by the session manager, in order to be able to | |
| # connect to the real JACK server. | |
| #alsa.jack-device = false | |
| # Reserve devices. |
