Converge F670L Bridge mode

Converge-F670L.md

1. Go to Network - WAN - WAN Connection
2. Right click Type Route dropdown select and click "Inspect" in the context menu.
   In console, run the code below:

   document.getElementById('Frm_mode').options[document.getElementById('Frm_mode').options.selectedIndex].setAttribute('value', 'BRIDGE');
   Change_mode();
   

   
3. Input New Connection Name. Example: Bridge. Click Create.
4. Go to Network - WAN - Port - Binding
   Select the Bridge WAN Connection. Check LAN3. Check other WAN connections and make sure LAN3 is not checked.
5. Connect the WAN connection of your Router to Port3 of the Converge CPE.
6. Configure your router's DHCP client.

It works.

Try to restart the modem. If still not working unplug cable from Lan3 and replug to force release/renew DHCP. Some routers have setting to manually release/renew DHCP.

…

On Tue, Jan 3, 2023 at 09:34 Albert Ilagan ***@***.***> wrote: ***@***.**** commented on this gist. ------------------------------ @JustinT1188 You will either get a CGNAT IP in your router or no IP at all (happens sometimes). You will not get an internal IP. Make sure you plugged the ethernet in Port3/Lan3 port. Try also to set Lan3 to Wan in Network-LAN-DHCP Port Service screen. Not really sure if it has any use though but let me know What do I do if I don't get an IP? Can't connect to the internet. DHCP already configured properly on my own router. my own router's wan already connected to lan3. lan3 is already bind as wan and new bridge connection mapped already to lan3. — Reply to this email directly, view it on GitHub <https://gist.github.com/5cfdc5d2c9e0bed3d8979f07944c051a#gistcomment-4421874> or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAA5XQNZJ25AAPG2DAOGZW3WQN64DBFKMF2HI4TJMJ2XIZLTSKBKK5TBNR2WLJDHNFZXJJDOMFWWLK3UNBZGKYLEL52HS4DFQKSXMYLMOVS2I5DSOVS2I3TBNVS3W5DIOJSWCZC7OBQXE5DJMNUXAYLOORPWCY3UNF3GS5DZVRZXKYTKMVRXIX3UPFYGLK2HNFZXIQ3PNVWWK3TUUZ2G64DJMNZZDAVEOR4XAZNEM5UXG5FFOZQWY5LFVEYTCNJSGAZTINZZU52HE2LHM5SXFJTDOJSWC5DF> . You are receiving this email because you authored the thread. Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub> .

Me pueden ayudar para sacar la contraseña del ppoe en zte F670L gracias

If I'm not mistaken, this is possible with PLDT Fibr residential plan and Globe Fibr. So I know that this is also possible with Converge

Were you able to troubleshoot this? I did the steps but still no internet in the other router's wifi. If by DHCP settings it means disable the dhcp of the other router then I also did that.

Same here, manage to access super admin and add the bridge mode but nothing changed, any advice?

This is working, however the speed decreases to 100mpbs. How were you able to bypass this limit?

EDIT: Resolved. My NIC has changed from 1000 mbps to 100 mbps. Had to reset the network or reseating the LAN cable.

Hi, does this router support WDS bridging? or just wired?

It works! - Converge ZTE F670L (blue firmware)

Does this work without a VLAN assigned to the bridge? No internet if I don't put in VLAN 10.

Does this work without a VLAN assigned to the bridge? No internet if I don't put in VLAN 10.

The setup won't function if the VLAN ID field is left blank.

Can you guys recommend a gaming router that is good at bridging converge modems to lower the latency?

I have this kind of Modem., is the procedure the same?

Can you guys recommend a gaming router that is good at bridging converge modems to lower the latency?

I have a GL.iNET Flint AX1800 router with OpenWRT. It works well for gaming because of SQM.

I have this kind of Modem., is the procedure the same?

You can try it and let us know.

Still getting local IP assigned by stock ZTE (PLDT) router, when I do the step below by @marfillaster I do not get ipv4 at all

Try also to set Lan3 to Wan in Network-LAN-DHCP Port Service screen. Not really sure if it has any use though but let me know

Edit: Finally managed to enable the bridge mode on F670L (PLDT) with a lil bit alteration to the steps stated in the guide

Still getting local IP assigned by stock ZTE (PLDT) router, when I do the step below by @marfillaster I do not get ipv4 at all

Try also to set Lan3 to Wan in Network-LAN-DHCP Port Service screen. Not really sure if it has any use though but let me know

Edit: Finally managed to enable the bridge mode on F670L (PLDT) with a lil bit alteration to the steps stated in the guide

Maybe you can share with us what changes you needed to make, to help us like this article helped.

I have this kind of Modem., is the procedure the same?

It works, but you must change it manually and must be bridge lowercase